Sigma Audley Inc. - Your source for peptides, ancillaries, AAS, and more!

[Max Magnus]

just search for Lobster’s thread here in the SU.

Thanks Friend ~

 

[Max Magnus]

the companies linked to sigma audley pre dates their startup on meso. they most likely just have companies in name linked to them with only 1 real company. or they just changed name.

ofc they're working with others aswell but these are all ssa im linking.

it seems after they came to meso they've tried to delete all their online foot steps

That makes sense (now that I think about it).

IF you have a Lab (big one), it would be prudent to set-up a 'Defensive Threat' strategy ... if one of your Labs gets popped, you can recover. --- IF YOU only have 1 lab and get popped --- you're out of business !

 

[dinfar1337]

That makes sense (now that I think about it).

IF you have a Lab (big one), it would be prudent to set-up a 'Defensive Threat' strategy ... if one of your Labs gets popped, you can recover. --- IF YOU only have 1 lab and get popped --- you're out of business !

they even say it themselves, they have different warehouses for everything.

the sigma audley i linked is probably their legit raw powder company.

then theres probably different companies for steroids, peptides etc aswell. and their warehouses. anyways with how easy i could find them i doubt any authority is looking for them and they know this since they're so public.

 

[Max Magnus]

they even say it themselves, they have different warehouses for everything.

the sigma audley i linked is probably their legit raw powder company.

then theres probably different companies for steroids, peptides etc aswell. and their warehouses. anyways with how easy i could find them i doubt any authority is looking for them and they know this since they're so public.

AT THIS TIME, I think the Fed has a 'Full Plate' with 'exporting illegals' --- They don't have unlimited resources (priorities are not AAS labs right now) -

-- BUT once a year you'll hear of an operation being busted --- I suspect higher ups in Gov. are looking the other way (and getting paid to do so) and a 'scape-goat' operation must go down (now and then).

-- MOREOVER, how many real labs are out there producing in the States? (seems like most are distributor middle men brokers with warehouses).

 

[Middus]

My reason for posting this is it seems even pharma struggles to eliminate aggregates entirely @Ghoul

All the knowledge we have out there on aggregation is from pharma's experience. No one is writing papers yet on UGL hgh

 

[Ghoul]

All the knowledge we have out there on aggregation is from pharma's experience. No one is writing papers yet on UGL hgh

There's also no consistency in reporting. Are all the floaters being seen in higher concentrations? That's a factor in how likely aggregates are to form. 36iu (really 40) should be 3ml (3.5ml even better), for instance. Pharma isn't reconstituted in random amounts of water.

So it would be helpful to know.

 

[Almoister]

There's also no consistency in reporting. Are all the floaters being seen in higher concentrations? That's a factor in how likely aggregates are to form. 36iu (really 40) should be 3ml (3.5ml even better), for instance. Pharma isn't reconstituted in random amounts of water.

So it would be helpful to know.

Did 3.6ml for 36ui also just filtered it 0.22 pes filter, looks clean except like few string like threads Idk why that didnt filter ? Or maybe it was reformed after ? Was under assumption 0.22 filter will filter everything visible but im new to this also my last filter for now

 

[HKOX]

Can't even get a response back from 'em. I'll stick to HYB who has the same stuff anyway.

 

[Sera]

Did 3.6ml for 36ui also just filtered it 0.22 pes filter, looks clean except like few string like threads Idk why that didnt filter ? Or maybe it was reformed after ? Was under assumption 0.22 filter will filter everything visible but im new to this also my last filter for now

It reforms after, (it did in mine, but not in Lobster’s). It might be due to the pH being wrong like @Ghoul was saying earlier. Maybe using PBS or another buffer with benzyl alcohol to recon would stop them forming.

 

[Ghoul]

It reforms after, (it did in mine, but not in Lobster’s). It might be due to the pH being wrong like @Ghoul was saying earlier. Maybe using PBS or another buffer with benzyl alcohol to recon would stop them forming.

Also, if not already, use the max BAC that'll fit in the vial, 3.5ml. Lower concentrations reduce chances of formation/reformation.

You also don't want to do things under high pressure conditions, so go slow, and using a large gauge needle on the filter outlet is preferable. 25g or larger.

 

[Almoister]

Also, if not already, use the max BAC that'll fit in the vial, 3.5ml. Lower concentrations reduce chances of formation/reformation.

You also don't want to do things under high pressure conditions, so go slow, and using a large gauge needle on the filter outlet is preferable. 25g or larger.

So after filtration it should be semi-fine? Used 21g needle i always do slow as possible everything with hgh just in case…

Also any recomendations on pH ? Will buy test for it to be sure its that/not that

 

[Ghoul]

So after filtration it should be semi-fine? Used 21g needle i always do slow as possible everything with hgh just in case…

Also any recomendations on pH ? Will buy test for it to be sure its that/not that

Should be around 6.1-7.4. 6.7 is ideal, slightly acidic.

 

[Photon]

Should be around 6.1-7.4. 6.7 is ideal, slightly acidic.

Different from serostim?
I have PBS on the way LOL

Reta is not FDA approved yet but quick search shows around pH 8

Hospira bac is usually below 6pH.

Post in thread 'Sigma Audley Inc. - Your source for peptides, ancillaries, AAS, and more!'

Aug 10, 2025

So the two types of aggregation that can occur are "growth", where peptides bump into each other and adhere into a "snowball" kind of structure, growing larger over time.

The other type of aggregation is spontaneous, where certain conditions will cause a certain size and shape to form almost immediately. with no intermediate "growth".

The latter is what I think the strings are, and most commonly the result of the PH being too acidic or base.

What may happen is the PH changes a little as the solution sits, just enough for the conditions to no longer support the spontaneous large...

• Photon

• 

 

[Ghoul]

Different from serostim?
I have PBS on the way LOL

Reta is not FDA approved yet but quick search shows around pH 8

Post in thread 'Sigma Audley Inc. - Your source for peptides, ancillaries, AAS, and more!'

Aug 10, 2025

So the two types of aggregation that can occur are "growth", where peptides bump into each other and adhere into a "snowball" kind of structure, growing larger over time.

The other type of aggregation is spontaneous, where certain conditions will cause a certain size and shape to form almost immediately. with no intermediate "growth".

The latter is what I think the strings are, and most commonly the result of the PH being too acidic or base.

What may happen is the PH changes a little as the solution sits, just enough for the conditions to no longer support the spontaneous large...

• Photon

• 

7.4 is the most comfortable. since it matches human ph. "isotonic"

But depending on the protein involved. it may not be ideal for storage in reconstituted form.

rHGH is most stable when it's slightly acidic.

Commercial formulations include buffers to reach a particular PH after reconstitution, and some go closer to 7.4 for a more comfortable injection, but include other stabilizers to prevent aggregation for the inherently less stable conditions created by that higher PH. Serostim is the exception, a 30 year old formula, with a 7.4 target ph and no anti-aggregation excipients. On the other hand it's stored and shipped in temperature controlled conditions (below 86f), protected with nitrogen, so it's not damaged in any of the ways that promote aggregation (oxidation, heat).

A box near the top of a shipping container from China can hit 158f, so by the time it reaches us, it could be very susceptible to aggregation vs undamaged rHGH.

 

[dick_starbuck]

View attachment 340675


this is just 1 one of their companies i could find which has dissolved now so it dosent matter i leak it.

and their sales reps whatsapp numbers defiently match the real companies i've found linked to real sigma audley company. you're dealing with a real company here.

but i dont blame you, everyone is saying they're resellers to sound smart when they dont know anything.

the people you're chatting with tho is probably worthless, they're just customer support people.

the most disturbing thing is finding out they're not only china company, but have ties to india aswell...

Well aint that something!

 

[dinfar1337]

Well aint that something!

i dont think they're producing aas raws but they're 100% producing peptides raws.

hope this shed some light on the nice facilities theres used on our products instead of people saying china shit quality bathtub brew

 

[Elektrobot]

Hgh36 from last month i bought 3 vials all have floating shit in it 2x recostruted with bac watter from different sources 1x with sterile vater from local pharmacy

Can you share which COA was given for this batch? I was about to buy some SSA GH 36 that tested at 40ish. Black tops. Thank you if you have it.

 

[whoremoan1]

is it only SSA that has the stringy floaters in the 36iu?
does HYB or lobster have it in their 36iu?

 

[Ghoul]

is it only SSA that has the stringy floaters in the 36iu?
does HYB or lobster have it in their 36iu?

Visible aggregates have appeared in everyone's rHGH at one time on another. Opti & Lobster had reports of it recently.

It's more common in higher dose vials.

This is not like "floaters" in oil. They form based on the presence of damaged rHGH, and/or too high concentration, PH. rough reconstitution, and other factors.

 

[SigmaAudley China Peptide]

TSM10 From customer blind test ;Janoshik Analytical