OEP LABS Domestic

[Photon]

Male luer end of coupler goes onto needle. Barb end of coupler slides onto tubing attached to vacuum side.

Something like this (random google)

Male Luer Lock to Barb Adapters (pack of 25)

A pack of Luer Lock to barb adapters in polypropylene to connect any Luer Female port to a soft-walled tubing. Available in a pack of 25 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or 1/8" (3.2 mm).

darwin-microfluidics.com

Luer Lock Connectors - Luer Lock Fittings

Bioprocess Luer Lock Fittings. Polypropylene(PP) adapter fittings. Male luer lock/female luer lock to 3/32", 1/8" or 1/4" Hose Barb. Pack of 50.

shop.cobetter.com

 

[Wizbang]

It should not come into contact with the oil.
You're creating negative pressure by sucking air out.

Ahhhh, I saw the pictures of the setup above makes sense thanks @Photon

 

[readalot]

Something like this (random google)

Male Luer Lock to Barb Adapters (pack of 25)

A pack of Luer Lock to barb adapters in polypropylene to connect any Luer Female port to a soft-walled tubing. Available in a pack of 25 units, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or 1/8" (3.2 mm).

darwin-microfluidics.com

Luer Lock Connectors - Luer Lock Fittings

Bioprocess Luer Lock Fittings. Polypropylene(PP) adapter fittings. Male luer lock/female luer lock to 3/32", 1/8" or 1/4" Hose Barb. Pack of 50.

shop.cobetter.com

See link i shared above. Maybe you didn't see it?

Good luck.

 

[Photon]

See link i shared above. Maybe you didn't see it?

Good luck.

Yea i saw, but i missed out the part where they actually sold it as well.
Yours does look better than the ones i linked.

 

[readalot]

Yea i saw, but i missed out the part where they actually sold it as well.
Yours does look better than the ones i linked.

Was trying to give a link to a part that closely matched the picture. No worries. Have a great rest of your weekend.

 

[Oldhand]

Another touchdown. The order is correct and in great shape. The entire ordering and delivery process went smoothly.

I cannot wait to try this Test D out! I’ll have to hold off though, I’m getting some of Pench’s EQ and Deca to run with it.

 

[mongo5165]

I think he's talking about this lol
I see something similar on Amazon but Im also curious what @mongo5165 is using (don't wanna buy the wrong crap)

View attachment 354257

This is what I bought. Works well. MEETOOT 10pcs Male Luer Lock 3/16" Polypropylene Hose Barb Adapter for Laboratory Biochemical/Analytical Instruments, Food Machinery and Aquarium Equipment: Amazon.com: Industrial & Scientific
Yeah it creates a good vacuum in the vial and pulls the oil right out of the filter and into the vial. No need to add any extra force to the syringe plunger (even with castor oil blends). Walk away and let it do its thing. I wanted to avoid as many steps as possible, while maintaining sterility.

Just invested in this to give it better stability

Amazon.com

 

[mongo5165]

I thought his setup was pretty clever, although theoretically this could decrease solvent concentration. But I try not to do PVNRT calculations on Sunday mornings, it's the lord's day.

Vacuum hovers around 25mmhg so hopefully its not enough to boil off the solvent

 

[readalot]

Vacuum hovers around 25mmhg so hopefully its not enough to boil off the solvent

Negligible at RT for BA in that matrix. Same for BB.

https://webbook.nist.gov/cgi/cbook.cgi?ID=C100516&Mask=4&Type=ANTOINE&Plot=on#ANTOINE

 

[Photon]

Negligible at RT for BA in that matrix. Same for BB.

https://webbook.nist.gov/cgi/cbook.cgi?ID=C100516&Mask=4&Type=ANTOINE&Plot=on#ANTOINE

I've never even noticed that data was on the nist page lol

 

[readalot]

I've never even noticed that data was on the nist page lol

Too lazy to provide BB plot. But you get the idea.

https://pubchem.ncbi.nlm.nih.gov/compound/benzyl_benzoate#section=Vapor-Pressure&fullscreen=true

 

[Deadpool99]

Yep, been working on it. Painful, but necessary. Quads have taken ~80% of my injections over the past couple of decades, and I started with 22g and 23g needles, so there's quite a bit in there. These 30g probably do 1/5th of the damage, if not less, as they're thinner and shorter. Wish I switched a long time ago.

Just decided to add quads to my injection sites, need to rotate to make room for daily glutathione.

Thanks for the 30g 1inch tip. Should be enough for the quads, I used to get alot of PIP and pai when injecting, even when doing around 0.6ml 3 times a week, and hit some veins when I used to do quads.

Do you inject on the top or side of the quad if u don’t mind answering. I used to do side of the quads.

 

[BigDadd7]

Just decided to add quads to my injection sites, need to rotate to make room for daily glutathione.

Thanks for the 30g 1inch tip. Should be enough for the quads, I used to get alot of PIP and pai when injecting, even when doing around 0.6ml 3 times a week, and hit some veins when I used to do quads.

Do you inject on the top or side of the quad if u don’t mind answering. I used to do side of the quads.

30 gauge 1" bends like crazy going into my quads. Someday, I'll order 5/8" and try again.

 

[ackmack78]

Just decided to add quads to my injection sites, need to rotate to make room for daily glutathione.

Thanks for the 30g 1inch tip. Should be enough for the quads, I used to get alot of PIP and pai when injecting, even when doing around 0.6ml 3 times a week, and hit some veins when I used to do quads.

Do you inject on the top or side of the quad if u don’t mind answering. I used to do side of the quads.

I just started doing top of the quads with a 23g the last month and it's been buttery smooth. Always stayed away from hearing people talk about how painful they are.

I hit the outer sweep halfway between hip and knee and theyve been great. Just did 2.4ml yesterday but I opened them up with insulin pins a few times first before large volume/gauge. I did hit what I'm assuming was a nerve for the first time yesterday when inserting the needle but it just felt funny and got a quick muscle twitch for a second and then I kept pushing the needle in, no big deal and no pip today

 

[Deadpool99]

30 gauge 1" bends like crazy going into my quads. Someday, I'll order 5/8" and try again.

Sheit, that was my fear to begin with. Trying to minimize scar tissue/irritation when going daily IM injections of Gluta.

Should I just go safe with a 27g 1inch?

Also if you don’t mind me asking (Ik I repeated this, apologies), since you’re a quad enthusiast, do you rotate between upper and side quads for injection or have a preference?

 

[Deadpool99]

I just started doing top of the quads with a 23g the last month and it's been buttery smooth. Always stayed away from hearing people talk about how painful they are.

I hit the outer sweep halfway between hip and knee and theyve been great. Just did 2.4ml yesterday but I opened them up with insulin pins a few times first before large volume/gauge. I did hit what I'm assuming was a nerve for the first time yesterday when inserting the needle but it just felt funny and got a quick muscle twitch for a second and then I kept pushing the needle in, no big deal and no pip today

My first injection location was quads, a few months into it, started getting painful injection and lots of bleeding. So I had to switch to glute. Might be a mistake on my end as a beginner

 

[GREENLIGHTGOOO]

Finally got access here but I just wanna say OEP is the best in the game. Only thing I’ve tried is his Test Cyp and it’s always on point

 

[Oldhand]

Just decided to add quads to my injection sites, need to rotate to make room for daily glutathione.

Thanks for the 30g 1inch tip. Should be enough for the quads, I used to get alot of PIP and pai when injecting, even when doing around 0.6ml 3 times a week, and hit some veins when I used to do quads.

Do you inject on the top or side of the quad if u don’t mind answering. I used to do side of the quads.

When I do a 3ml injection I hit the sides of the quad with a 26g 1.5” (I don’t necessarily bury it). This would be for the actual cycle compounds.

When I do a 1ml injection I pin a spot that is “ready”- this is typical on the face/top of the quad. When pinning the top, I use a 31g 5/16”. This is mainly for TNE/pre-workout injections.

I think it’s important to mention that you need to hit very lean spots with short pins. I’m a believer in IM injections for oils.

 

[BigDadd7]

Sheit, that was my fear to begin with. Trying to minimize scar tissue/irritation when going daily IM injections of Gluta.

Should I just go safe with a 27g 1inch?

Also if you don’t mind me asking (Ik I repeated this, apologies), since you’re a quad enthusiast, do you rotate between upper and side quads for injection or have a preference?

I pin right where my finger tips hit my quads. Somewhere between straight in front and 20 degrees to the outside.

The 30ga was absolutely painless, I just didn't like the way it was bending all over the place.

 

[BigDadd7]

Finally got access here but I just wanna say OEP is the best in the game. Only thing I’ve tried is his Test Cyp and it’s always on point

How do you know he's the best if you've only tried test cyp? Just asking.