I seen 2 tests, 1 tested at 89% the other tested at 91%. I think both of the tests i seen was from B Ware, same batch i think but he received it in 2 different packs
MESO-Rx
Anabolic Steroids
MESO-Rx Sponsor Genuine Steroid Powder Manufacturer-AASraw
- Thread starter AASraw
- Start date
justtrtbro
Member
No one talked more shit in here about them than me, but the HPLC is probably the better test to go by here. 89% isn't amazing but it isn't that far off a typical NPP test result.
I agree it looks dirty as fuck, and they clearly cut some corners in manufacturing this.
Overpriced for sure, but if they sold us 76% NPP at that price I don't think anyone would buy from them again.
Gone are the days of throwing a raw baggie in a mix of carrier/bb/ba and throwing it in a microwave. My concern is the quality of RAWS and the vendors COA's being actual lies.
This purity value (%) is relied on to make a properly dosed end product, with some loss (actual difference) and degradation correction (est). If you don't suck at math then you should get an very on point final solution.
People that brew shouldn't be testing raws. But a sample of their own end finished product. From that sample you can tell if the raw vendor isn't honest about their COA and claims of purity.
If I see a "Vendor" with a bunch of Janoshik reports. They are just middle men, resellers, which is fine. If they are keen to source quality raws. They will not show the origin COA as it will give up their source.
The actual manufacturers have their own internal QA/QC testing. And they all come with an actual RELIABLE COA. They have too, they don't just sell raws to UGLs..
So where is the actual COA of this shitty raw?
It's with the bad batch of NPP they got hold off. They knew it was low quality shit.
This purity value (%) is relied on to make a properly dosed end product, with some loss (actual difference) and degradation correction (est). If you don't suck at math then you should get an very on point final solution.
People that brew shouldn't be testing raws. But a sample of their own end finished product. From that sample you can tell if the raw vendor isn't honest about their COA and claims of purity.
If I see a "Vendor" with a bunch of Janoshik reports. They are just middle men, resellers, which is fine. If they are keen to source quality raws. They will not show the origin COA as it will give up their source.
The actual manufacturers have their own internal QA/QC testing. And they all come with an actual RELIABLE COA. They have too, they don't just sell raws to UGLs..
So where is the actual COA of this shitty raw?
It's with the bad batch of NPP they got hold off. They knew it was low quality shit.
Pez'sAnabolicJunta
New Member
Communication has been non-existent in the past 8+ days. An order was in pre-holiday the once quick communication has stopped.
FastBun
Member
haven’t seen a test that low… I think BWares came in around 91% with a jano test… so I think that’s pretty good nd his oil test was good too… white or yellow raw??? I don’t think it matters tbh… most of yall have zero knowledge in chemistry to be making these assumptions without knowing synthesis and alternative routes… not comin directly at u…
I think you should read the entire thread. Wasn't just color (with the Test C etc) but sediment with NPP. that will NOT dissolve and has to be filtered and factored OUT but purity would be all out of wack.
They cannot have possibly manufactured this NPP. There is NO way it would pass QC and the COA for NPP.
Raw Nandrolone phenylpropionate(npp) powder(62-90-8)≥98%|AASraw
AASRaw for sale purity 99%Nandrolone Phenylpropionate Powder or npp powder ,weight loss,Bodybuilding，manufacture, Synthesis, production,suppliers....
www.aasraw.co
Assay: 98%min(HPLC)
AND ALSO:
Color: White to Off-White Solid powder
They didn't bother to QA the product because they didn't manufacture it, thus the silence...
Last edited:
Drostanolone Enanthate / Masteron (CAS 472-61-1) is now open for pre-order.
www.aasraw.co
Quantity 300.25KG
Report Date 2024.10.17
MFG. Date 2024.10.15
Expiry Date 2027.10.14
Theres a useless Jano report from 23. That contradicts their COA from 24
Why are they going to Jano? Did they manufacture the raw in 24 and didn't in 23?
There is no reason to doubt a COA from a manufacturer OR they did not produce it!
Won't be "pre-ordering" without at least an in house COA for this latest batch, or they didn't make it...
Drostanolone Enanthate Raw Powder (472-61-1) ≥98% | Aas Raw
AAS raw provides purity 98% Drostanolone/Masteron Enanthate raw powder to underground labs or bodybuilders for bulk gain usage.
www.aasraw.co
Quantity 300.25KG
Report Date 2024.10.17
MFG. Date 2024.10.15
Expiry Date 2027.10.14
Theres a useless Jano report from 23. That contradicts their COA from 24
Why are they going to Jano? Did they manufacture the raw in 24 and didn't in 23?
There is no reason to doubt a COA from a manufacturer OR they did not produce it!
Won't be "pre-ordering" without at least an in house COA for this latest batch, or they didn't make it...
Last edited:
Detroitmonster
Member
Just a heads up to Bware and anyone else who had the shitty NPP raws . I’ve and very busy talking with this company and complaining to get you guys a refund or new pure product.
Detroitmonster
Member
I let them know when they contacted me back with a price quote that if they do not fix the issues on our forum with my fellow bodybuilding brothers, who are their current customers ,the rest of us damn sure won’t be there next Customer
Detroitmonster
Member
Remember where a bunch of husband‘s dad‘s brothers and sons nobody wants to see the next one get hurt, sick or possibly death.
Do you think filtering the NPP with a 22 micron filter is going to capture all the sediment?I think you should read the entire thread. Wasn't just color (with the Test C etc) but sediment with NPP. that will NOT dissolve and has to be filtered and factored OUT but purity would be all out of wack.
They cannot have possibly manufactured this NPP. There is NO way it would pass QC and the COA for NPP.
Raw Nandrolone phenylpropionate(npp) powder(62-90-8)≥98%|AASraw
AASRaw for sale purity 99%Nandrolone Phenylpropionate Powder or npp powder ,weight loss,Bodybuilding，manufacture, Synthesis, production,suppliers....
Assay: 98%min(HPLC)
AND ALSO:
Color: White to Off-White Solid powder
They didn't bother to QA the product because they didn't manufacture it, thus the silence...
Stauros3315
Member
If that helps i brewed 500ml and it clogged two . 22 filter. I pined 1ml to tset it and was all perfect
xrayphoton13
Member
Of course not. They're just a reseller. That's why they haven't had much in stock most of this year bc all the manufacturing was shut down. But they weren't. So if they were a manufacturer they would have been pumping out product non stop all year. Are there would be no drop in quality that we are seeing across the boardI think you should read the entire thread. Wasn't just color (with the Test C etc) but sediment with NPP. that will NOT dissolve and has to be filtered and factored OUT but purity would be all out of wack.
They cannot have possibly manufactured this NPP. There is NO way it would pass QC and the COA for NPP.
Raw Nandrolone phenylpropionate(npp) powder(62-90-8)≥98%|AASraw
AASRaw for sale purity 99%Nandrolone Phenylpropionate Powder or npp powder ,weight loss,Bodybuilding，manufacture, Synthesis, production,suppliers....
Assay: 98%min(HPLC)
AND ALSO:
Color: White to Off-White Solid powder
They didn't bother to QA the product because they didn't manufacture it, thus the silence...
Yes definitely, but it's too fine for grit and may clog repeatedly using up filters.
Bascially yeh, thats my point, the main raw producers aint got time for a 3rd party test. If they are producing tons of raws, most definitely have testing equipment and procedures as part of their QC and QA. I see a jano test with a "Manufacturer" is
Ain't got in house testing equipment and blindly produce raws or have no testing equipment because they don't produce raws.
clogged two filters? So basically you have no idea on the dosage? since it's 1:1 100mg/ml. I'm guessing it's 80mg/ml? Or did you factor in %20 more raw powder?
Stauros3315
Member
Exactly according to purity test from jano i put 62.5g raw powder instead of 50g for 500ml. This will produce 125mg per ml in 1 litre final product
Official statement for Npp powder(89% purity)
After receiving Janoshik’s report on NPP, we took the product quality concern very seriously and quickly launched a full investigation and comparison. We discovered around a 10% difference between our own NPP test results and Janoshik’s findings. Our company already announced a solution and your rep will be reaching out to you with the details very soon!
Thank you.
After receiving Janoshik’s report on NPP, we took the product quality concern very seriously and quickly launched a full investigation and comparison. We discovered around a 10% difference between our own NPP test results and Janoshik’s findings. Our company already announced a solution and your rep will be reaching out to you with the details very soon!
Thank you.
Stauros3315
Member
Thats perfect i think
watchtymeflyyy
Member
Sounds like u might need to test your own… just saying
Similar threads
