MESO-Rx Sponsor Axle Labs - US Domestic

How is this selling at close to 1/2 the price of bulksupp raws..
Been using it for a 4 months. Been wondering if under dosed but my ALT and AST have come down within normal ranges and I consistently for years, have been out of range. They have been my hidden secret. Dont everyone buy it up now.
 
Ask Jano if he can check for peroxide value
HPLC - mg/ml
GCMS - contamination (also shows what oil type, mct vs gso)
Peroxide - oil oxidation

i'm sure you won't be the first to ask, so testing it will probably help the others out
(and vendor reimburses lol)
Saving this post so I know what to ask for if that ever comes up for me. Thanks for the info.
 
I don’t have sources on hand but I’ve read how sleeping in the cold is especially good for brain health. I’m more impressed how you convinced the wife to tolerate it!

I grew up poor in a cold climate ("mom I'm cold"....."put another sweater on") and my wife is from a mountainous region in Southern South America. We also both thrive in cold weather/keep a cold house during winter. There's a few of us weirdos out there.
 
Peroxide - oil oxidation

Jano has never heard of this test. Here is their reply when I asked:


What do you mean by peroxide test?

With regards to harm reduction, we offer following additional services which are able to detect possible contamination of the product:

GCMS analysis for 170 USD:

GCMS testing uses NIST 2014 library to detect tens of thousands of possibly harmful substances in the product. Detection is limited to volatile and semi-volatile compounds and the test cannot be used on peptide samples.

The test gives only identification of contaminants. Measurement of concentration can be offered for additional price once such substance is detected.

The test does not check for heavy metals, bacteria, molds or LPS, which require specific test below.

Sterility testing for 240 USD - TAMC and TYMC test checking the presence of bacteria and molds in the product.

Heavy metals analysis for 60 USD (when ordered as add-on to another test, 120 USD when ordered separately) - detects presence of As, Cd, Pb, Hg. For other metals please inquire.

Fentanyl presence analysis for 60 USD - checks for fentanyl in the sample.

For more info please inquire.

Would you like to add any of them to your order?
 
Jano has never heard of this test. Here is their reply when I asked:
I am looking at this thread for the first time and just saw your comment and what you quoted. That's all to say, I don't really know the context for certain, but it sounds like you're worried something in an injectable has gone bad.

The process is called autooxidation, and it occurs when organics interact with oxygen. If you're worried about a steroid in carrier oil, it's very, very likely that the steroid would remain reduced while the oil oxidized in the case of room- or mildly elevated-temperature oxidation. It's definitely true of testosterone.

Even simple molecules can have dozens of breakdown products, so a mix of molecules like in a carrier oil will be a zoo of constituents. Lipids generally result in aldehydes, ketones, alcohols and acids, and hydrocarbons. The products will generally have masses in the C2-C10 range.

I can list a few that I know to occur: hexanal, nonanal, 2,4-decadienal, pentanal, butanal, acetic acid, propionic acid, then ultimately formaldehyde and acetone. Those are roughly in abundance order for mixtures predominated by linoleic and oleic acids -- those are the two biggies for both GSO and CSO. MCT is incredibly resistant to oxidation, so even if you abuse the shit out of it thermally and leave it open to air, the risk of oxidation is low.

GSO is the most likely to oxidize of those, and the major volatiles are the ones listed above -- mostly hexanal, nonanal, 2,4-decadienal. The base peaks for these are 72, 86, and 152 -> 81 respectively. A peak at m/z 44 is expected for all three of those (it is the diagnostic peak for aldehydes), with other major peaks at 29, 55, 111, 114 128.

If I've answered the wrong question, I'm embarrassed and will dose myself with enough DNP to bake in shame.
 
Only
It is EQ. Go ahead please send it in.

We had a batch that used to crash too much and was tested +96% so it was inconvenient for many buyers who want to make it over 300mg/ml.

Your normal EQ raws seller provides 60-70% purity EQ raws.

This is the exact same situation happening right now. But as I said, send it off. You’ll be fully compensated.
my only take on it is guessing BB percentage must be extremely low, so during transit the EQ doesn’t stay in solution. Because as we all know EQ doesn’t really require BB at low concentrations and at higher concentrations yes it’s recommended. However I had some EQ way before that crashed when I shipped to my new address while temperature during transit was cold.
 
Only

my only take on it is guessing BB percentage must be extremely low, so during transit the EQ doesn’t stay in solution. Because as we all know EQ doesn’t really require BB at low concentrations and at higher concentrations yes it’s recommended. However I had some EQ way before that crashed when I shipped to my new address while temperature during transit was cold.
Good to know
 
my only take on it is guessing BB percentage must be extremely low, so during transit the EQ doesn’t stay in solution. Because as we all know EQ doesn’t really require BB at low concentrations and at higher concentrations yes it’s recommended.

Doesn't need bb, it's usually added at high concentrations to thin the oil out. This vendor might however have a batch of EQ that's different so who knows.

It's already a liquid at a highly concentrated state (raw).
 
MCT is incredibly resistant to oxidation, so even if you abuse the shit out of it thermally and leave it open to air, the risk of oxidation is low.

That's the gist of it. I'm trying to determine why the DHB I received is so damn yellow. @Axle Labs sold it as MCT oil. Even the picture of the DHB on their website shows a crystal clear liquid yet the product I received is an almost neon yellow.

What I was sold:

1762355057490.webp

What I received:

1762355312272.webp

Axle appears to have gone dark. Not answering emails and site(s) are down for "restocking and brewing" purposes. So now I'm even hesitant to send it off for testing since I can't be sure I'll be credited for it.

Here is another reply from Jano when describing specifically what I want:

Hello friend,

we cannot tell in advance if the GCMS test would provide you with the information why the oil is rancid since we'd need to know for which compound we should be looking for.

The test may find the compound that is causing it, but as I wrote you above, we'd need to know what to look for.

However, the GCMS test would provide you with more information about the sample overall so I'd definitely recommend you this test.

Would you like to proceed the order?
 
That's the gist of it. I'm trying to determine why the DHB I received is so damn yellow. @Axle Labs sold it as MCT oil. Even the picture of the DHB on their website shows a crystal clear liquid yet the product I received is an almost neon yellow.

What I was sold:

View attachment 359425

What I received:

View attachment 359426

Axle appears to have gone dark. Not answering emails and site(s) are down for "restocking and brewing" purposes. So now I'm even hesitant to send it off for testing since I can't be sure I'll be credited for it.

Here is another reply from Jano when describing specifically what I want:

Hello friend,

we cannot tell in advance if the GCMS test would provide you with the information why the oil is rancid since we'd need to know for which compound we should be looking for.

The test may find the compound that is causing it, but as I wrote you above, we'd need to know what to look for.

However, the GCMS test would provide you with more information about the sample overall so I'd definitely recommend you this test.

Would you like to proceed the order?
The test cyp 200 and eq 300 I received are also yellow and are supposed to be in mct oil. Any gear I have gotten from axle in the past was always clear when in mct. I’m also curious why all the gear is yellow now
 
Only

my only take on it is guessing BB percentage must be extremely low, so during transit the EQ doesn’t stay in solution. Because as we all know EQ doesn’t really require BB at low concentrations and at higher concentrations yes it’s recommended. However I had some EQ way before that crashed when I shipped to my new address while temperature during transit was cold.
Would low bb percentage cause it to crash again after being warmed up? My eq arrived crashed and I heated it in hot water and it easily dissolved all the crystals, but it crashed again within a few hours being stored at room temperature. I’ve repeated the process twice but it keeps crashing again
 
Let's give Axle the benefit of the doubt here - it's entirely possible it's not his fault and the meth addicted brewer with a 90 IQ decided to brew up a batch of nonsense and sell it to you.

I don't see anyone casting blame. Just looking for answers to which Axle has yet to respond. Going dark when you have product in transit (or at all really) isn't exactly great customer service.
 

Sponsors

Back
Top