OEP LABS Domestic

[johnydrama]

I have done 3 injections with the anadrol.

One of them was like fire, literally like a knife was stuck in my shoulder for 1-2hrs. Front delt. I figured this was because I mixed it with mtren. It was 1cc drol and .5cc mtren.
Second time 1cc alone no issue pec inject.
Third 1cc pec inject there was pain, not as bad as first but it wasn't great.

I didn't notice till after the second that it had crashed a little. Mug warmer did the job. The issue I think was both painful times I had taken the dose to work with me and shot it later in the day. I have a nice microwavable heating pad I use for injects, the thing works awesome. I just think it's possible it crashed a little in the syringe and the heating pad didn't get it all. All pins 30g 1/2".

I got some vials in the freezer and some is def crashed which is expected. Others aren't.

I don't like loading syringes too long before use. I feel like within 24 hours the plunger is already swollen in there which can't be a good thing.

 

[Photon]

I have done 3 injections with the anadrol.

One of them was like fire, literally like a knife was stuck in my shoulder for 1-2hrs. Front delt. I figured this was because I mixed it with mtren. It was 1cc drol and .5cc mtren.
Second time 1cc alone no issue pec inject.
Third 1cc pec inject there was pain, not as bad as first but it wasn't great.

I didn't notice till after the second that it had crashed a little. Mug warmer did the job. The issue I think was both painful times I had taken the dose to work with me and shot it later in the day. I have a nice microwavable heating pad I use for injects, the thing works awesome. I just think it's possible it crashed a little in the syringe and the heating pad didn't get it all. All pins 30g 1/2".

I got some vials in the freezer and some is def crashed which is expected. Others aren't.

I don't like loading syringes too long before use. I feel like within 24 hours the plunger is already swollen in there which can't be a good thing.

Mtren is pip free at 10mg/ml
If you have time I'd just throw it on the mug warmer before each pin tbh

 

[OEP LABS]

Few Announcements Today Men. Topics:

Anadrol inject.

PTFE Stoppers.

Updating the List ASAP.

PTFE Filter delay with solution.

MENT Enanthate low Quantity.

1 true pleasantry to say, thank you all for your continued support I mean that sincerely. Now let’s get straight to business and the topics.

Anadrol inject sorry about using such a large pin. I guess it’s just the Old School in Me. As of right now, I feel warm, feels kinda good not gonna lie, it’s been a long minute since using Anadrol. I administrated the Anadrol 1ml in the left delt. No aches or pains to complain about now. However like Rocky said, let’s see what tomorrow and the following day Bring in regards to delayed PIP if present. More to come and update on this topic as days pass.

PTFE Stoppers.

I honestly can’t say how delighted I am with these stoppers that I found. I searched high low for a suitable replacement with same standards and PTFE coating. In which you can tell it’s there as you can feel it with a nitrile glove on. I posted several pics with a digital caliper to show everyone the dimensions in different angles. The fitment is absolutely amazing as well. Please let me know your thoughts as well.

The List

After logging off here shortly, I’ll be updating the list with all of the items that will be coming and the prices associated with them.

PTFE filter delay with solution.

So I ordered PTFE filters about two weeks ago that should’ve arrived already, but they’re running very delayed. This vendor has been very good to me and I should’ve known not to pay them with crypto even though they take it. It can be slow for them to process it. So I’m gonna take the heat on this one and overnight more right after this announcement.

There was a few clients that reached out to me during my departure about Test C and Test E. I did agree to take care of a few of my people. 1 client was low on his TRT supply I know that feeling. However, to the point, if this affects you and you need to use a different vendor. Please contact me and I will 100% refund you with zero questions asked. No hard feelings whatsoever this delay is on me my apologies. Filters will be overnighted.


Ment Enanthate.

I was only able to grab a very low quantity of this material. It will approximately make under 50 but over 40 Vials that will be dosed at 100mg/ml in a 10ML size. I’m gonna stay in close contact with this vendor to see if he can get us more.

Some good news as well. On hand we have a pleasant amount of Test Decaonate on deck and more coming.
Plenty of Ment Ace as well on deck.
Halo on deck.
More Halo in route and a fresh batch of TRA on the Androgen Pigeon.

I believe the best game plan is to send sections of samples for the purity reports and compound the materials utilizing the purity reports as they come in.

Versus waiting for everything to come in and sending all samples off. That would be a lot of brewing for days in my opinion. However, this is a community decision. Therefore, your thoughts and voice definitely matters. So please don’t stay quiet let me know your thoughts.

Please forgive for any grammar errors or misspellings. I’ll return to answer questions right after updating the list and overnighting these filters.

 

[FatDan]

Few Announcements Today Men. Topics:

Anadrol inject.

PTFE Stoppers.

Updating the List ASAP.

PTFE Filter delay with solution.

MENT Enanthate low Quantity.

1 true pleasantry to say, thank you all for your continued support I mean that sincerely. Now let’s get straight to business and the topics.

Anadrol inject sorry about using such a large pin. I guess it’s just the Old School in Me. As of right now, I feel warm, feels kinda good not gonna lie, it’s been a long minute since using Anadrol. I administrated the Anadrol 1ml in the left delt. No aches or pains to complain about now. However like Rocky said, let’s see what tomorrow and the following day Bring in regards to delayed PIP if present. More to come and update on this topic as days pass.

PTFE Stoppers.

I honestly can’t say how delighted I am with these stoppers that I found. I searched high low for a suitable replacement with same standards and PTFE coating. In which you can tell it’s there as you can feel it with a nitrile glove on. I posted several pics with a digital caliper to show everyone the dimensions in different angles. The fitment is absolutely amazing as well. Please let me know your thoughts as well.

The List

After logging off here shortly, I’ll be updating the list with all of the items that will be coming and the prices associated with them.

PTFE filter delay with solution.

So I ordered PTFE filters about two weeks ago that should’ve arrived already, but they’re running very delayed. This vendor has been very good to me and I should’ve known not to pay them with crypto even though they take it. It can be slow for them to process it. So I’m gonna take the heat on this one and overnight more right after this announcement.

There was a few clients that reached out to me during my departure about Test C and Test E. I did agree to take care of a few of my people. 1 client was low on his TRT supply I know that feeling. However, to the point, if this affects you and you need to use a different vendor. Please contact me and I will 100% refund you with zero questions asked. No hard feelings whatsoever this delay is on me my apologies. Filters will be overnighted.


Ment Enanthate.

I was only able to grab a very low quantity of this material. It will approximately make under 50 but over 40 Vials that will be dosed at 100mg/ml in a 10ML size. I’m gonna stay in close contact with this vendor to see if he can get us more.

Some good news as well. On hand we have a pleasant amount of Test Decaonate on deck and more coming.
Plenty of Ment Ace as well on deck.
Halo on deck.
More Halo in route and a fresh batch of TRA on the Androgen Pigeon.

I believe the best game plan is to send sections of samples for the purity reports and compound the materials utilizing the purity reports as they come in.

Versus waiting for everything to come in and sending all samples off. That would be a lot of brewing for days in my opinion. However, this is a community decision. Therefore, your thoughts and voice definitely matters. So please don’t stay quiet let me know your thoughts.

Please forgive for any grammar errors or misspellings. I’ll return to answer questions right after updating the list and overnighting these filters.

Wonderful news. Hope I can snag a Trest E vial or two. Thank you for the updates.

 

[Oldhand]

I believe the best game plan is to send sections of samples for the purity reports and compound the materials utilizing the purity reports as they come in.

Versus waiting for everything to come in and sending all samples off. That would be a lot of brewing for days in my opinion. However, this is a community decision. Therefore, your thoughts and voice definitely matters. So please don’t stay quiet let me know your thoughts.

IMO, sending off a few samples at a time and brewing it is the way to go- I agree with your plan.

if you waited for everything to come in and sent it off all at once, that means you would have to brew everything at once too. There are only 24 hours in a day- this way just doesn’t work.

The updates are great, lots to be excited about!!! BTW the fact you didn’t blame your filter vendor for the delay is a classy move.

 

[RockyP]

Ya’ll be sure to warm that anadrol thoroughly as a precaution. Got a nasty injection site reaction (not cellulitis, just swollen and red) from being negligent in this at the beginning and clearly pinned some crystals I couldn’t see. Seems it’s just in the nature of brewing it without the super solvents.

 

[Foreverlost4]

Ya’ll be sure to warm that anadrol thoroughly as a precaution. Got a nasty injection site reaction (not cellulitis, just swollen and red) from being negligent in this at the beginning and clearly pinned some crystals I couldn’t see. Seems it’s just in the nature of brewing it without the super solvents.

Yeah if it isn’t fully dissolved you’ll end up like Paul posting your ass on forums.

 

[RockyP]

Yeah if it isn’t fully dissolved you’ll end up like Paul posting your ass on forums.

The issue with the anadrol is the crashing isn’t obvious / visible to naked eye like it can be with TNE and other compounds prone to crashing. I’d strongly recommend everyone treat it as if it’s crashed and use whatever warming protocol you’re familiar with.

 

[AlexDavis43]

Bro why are you harpooning yourself with a 25g needle when your shit is so thin and smooth that you can push it through a 30g with ease?!? I use BD 30g Precision Glide 1” luer lock needles. I Draw with 20g and pin with the 30g. Way less tissue damage and doesnt take long at all to inject 1ml. Those needles are kind of hard to find, but I stock piled a 1000 or so lol.

Is it a competition to see who can use the skinniest needle ?

Imo, scar tissue is more likely due to injection technique or user error

been hitting quads with 23g for decades and no scar tissue in sight, I think, due to adopting the dart injection technique (it's how nurses administer IM injections)

[ many video tutorials online, this one starts at around 6:20 ]

 

[crispybacon!]

Is it a competition to see who can use the skinniest needle ?

Imo, scar tissue is more likely due to injection technique or user error

been hitting quads with 23g for decades and no scar tissue in sight, I think, due to adopting the dart injection technique (it's how nurses administer IM injections)

[ many video tutorials online, this one starts at around 6:20 ]

I suppose it’s different for different people, but for me, I don’t need anything bigger than a 27g (thin wall) for what I’m using. But I’m <=1ml on everything. I do find 30g to require more pressure and is therefore a little slower, so I rarely use 30s, unless it’s something with Mig840.

Besides pushing higher volumes more quickly, what’s the advantage of going bigger?

 

[AlexDavis43]

Besides pushing higher volumes more quickly, what’s the advantage of going bigger?

It doesn't have to be "more quickly," but that's pretty much it

I like the speed of injections to be controlled by my will/preference, not by how hard it is to press the plunger

 

[OEP LABS]

I'm catching up on reading all the input Men and I promise to take into account everything everyone had to say. Please let me know your thoughts on the list. So 1 important detail I read is Anadrol crashing? Badly enough to keep crashing ? So that we can adjust the BB content? List link below


View: https://pastebin.com/DBcEeViJ

 

[Veinyone]

Is it a competition to see who can use the skinniest needle ?

Imo, scar tissue is more likely due to injection technique or user error

been hitting quads with 23g for decades and no scar tissue in sight, I think, due to adopting the dart injection technique (it's how nurses administer IM injections)

[ many video tutorials online, this one starts at around 6:20 ]

haha definitely not a competition. I was actually just giving pench a plug for how thin and smooth his gear is. I like to push the needle in pretty slow. I can usually tell if I hit a vein or if something isn’t quite right and then readjust. (Good for helping prevent Tren cough lol) I’ve done the dart method with 25g plenty of times but I find it to be more unpleasant and leave a bit more pip. The smaller gauge needle also slows down the injection rate which seems to help with pip in my experience.

I’m aware you can just slow down pushing in the plunger but I tend to push too hard regardless. It’s like a governor for me lol.

 

[RockyP]

I'm catching up on reading all the input Men and I promise to take into account everything everyone had to say. Please let me know your thoughts on the list. So 1 important detail I read is Anadrol crashing? Badly enough to keep crashing ? So that we can adjust the BB content? List link below


View: https://pastebin.com/DBcEeViJ

The anadrol I was referencing was brewed by another highly reputable vendor, not sure what solvent ratio they were using. Another member had brewed his own Anadrol 50 and 75 and reported crashing also. @Photon any suggestions for the man @OEP LABS ?

 

[Photon]

I'm catching up on reading all the input Men and I promise to take into account everything everyone had to say. Please let me know your thoughts on the list. So 1 important detail I read is Anadrol crashing? Badly enough to keep crashing ? So that we can adjust the BB content? List link below


View: https://pastebin.com/DBcEeViJ

PWO crashing is fine imo, just tell ppl to heat it up lol. My AD50 and 75 both crash at 3/50.

 

[crispybacon!]

It doesn't have to be "more quickly," but that's pretty much it

I like the speed of injections to be controlled by my will/preference, not by how hard it is to press the plunger

Agreed. And that’s why I don’t use 30g that often. But I feel like with 27g TW I get little to no resistance.

 

[ZaddyZonar]

. So 1 important detail I read is Anadrol crashing? Badly enough to keep crashing ? So that we can adjust the BB content?

I’d personally like it to be left as is, nothing a little bit of heat prior to pinning can’t fix

 

[Oldhand]

I agree, if PWO crashes it is acceptable. That is the trade off paid for not using the harsh solvents.

 

[OEP LABS]

@Photon
@RockyP
@Oldhand
@ZaddyZonar
and everyone that has helped me, thank you for the quick cliff notes it is appreciated. Filters have been overnighted.

Some more good news.

Just spoke to the vendor who provided the Ment Enanthate and he said test your incoming Ment E. Then I will provide you with more as you need it. I told him I'm down 100%.

I'm starting to really like the way this vendor conducts his business! This could be good for all of us as he touched on some incoming compounds. Those compounds that many have been asking for. Let us see slowly how this goes. Let me get back in the filter room and continue giving hell. I'll periodically be reading and answering any and all questions. Thank you everyone for the support.

BTW those samples last sent are super to Jano Team literally maybe under his floor mat. I''ll keep everyone posted

 

[heavydutygorilla]

All great updates in here today as per usual with my morning cup of coffee, starting the week off right!! Thanks for the updates as always brother Pench! Really looking forward to trying this anadrol out you're blessing us with!