OEP LABS Domestic

[Photon]

Ok you have my attention, so your saying maybe test the material with a GCMS rather than the finished oil?

Scoob! good to see you Sir, by the way this is material that just landed but same batch and lot number. Same look and all. Was checking with the community the best and safest route to test and analyze the material prior to use. If a finished oil GCMS sample would be compliant. Ill pull a material sample as well just in case

If you don't find anything off with the raw via raw GCMS, it's unlikely you'll find anything via oil GCMS

GCMS on finished product is usually used to find contamination that occured somehow during the brewing process.

 

[cap’nboldenone]

If you don't find anything off with the raw via raw GCMS, it's unlikely you'll find anything via oil GCMS

GCMS on finished product is usually used to find contamination that occured somehow during the brewing process.

This is what I was thinking. The only difference between GCMS for raw vs finished product should be that the oil also has MCT, BB, and BA.

 

[Earthworm Jim]

Thank you Sir for this input. Those were my thoughts as well as we'd be taking a final review of the end process

Say the word Mr. Jim and send me an email. 1-2 days prior I can blow that email up notifying you sir like a bad angry ex girlfriend lol

I've got the 20th marked gonna try and order a bunch of TU

 

[DraxTheDestroyer]

I think I need a Susta-Lube, stat

 

[Talmad]

Spoke with Pench today! Can’t wait till he gets open! This guy and his oils are top tier!!! Sustalube is awesome! Can’t wait to sink my teeth into that NPP!!! Hope to see mast real soon also! Best on meso hands down!

 

[nullandvoid]

I need some NPP myself. Currently running on some "emergency" NPP that no doubt has some kind of super solvent in it based on the smell. Would rather avoid. Just managed to get my hs-CRP back down to under 1.

 

[OEP LABS]

Spoke with Pench today! Can’t wait till he gets open! This guy and his oils are top tier!!! Sustalube is awesome! Can’t wait to sink my teeth into that NPP!!! Hope to see mast real soon also! Best on meso hands down!

Much appreciate the support Sir, we'll continue to give it hell my man

 

[Motojager]

If I may request Guidance/Advice Please from the Community

Jano team concluded the remaining 16% it was unbound ester and degradation. Question now

If I took an educated guess and performed a GCMS Test on the Finished Oil and also a HPLC Test for target milligram. Would a GCMS Test on the finished oil after review be enough to call the finished oil safe? Please let me know your thoughts everyone.

Unbound ester isn’t really a thing. What you likely meant is unbound hormone (free testosterone).

So, some food for thought before you brew this:

If you base your brew numbers off 84% TD, and the remaining 16% impurities are lets say 10% free testosterone and 6% misc shit, then aiming for a 500 mg/mL TD oil depot means you’ll weigh about 595 mg of powder per mL to hit your target TD.

At that point, you’re also carrying along roughly:
60 mg/mL free testosterone (595 × 0.10 ≈ 59.5 mg)

Free test is lighter (higher testosterone base per mg) and behaves differently than TD, so that extra free hormone can increase the odds of crashing and potentially PIP, depending on your solvent system and how you would already be pushing solubility at 500 mg/mL

If you are referring to free decanoic acid as "unbound ester" then that's a whole different animal.

 

[heavydutygorilla]

Me waking up daily, checking the calendar and crossing the days off until opening...only 1 week and a day to go fellas!

 

[Scooby69]

Unbound ester isn’t really a thing. What you likely meant is unbound hormone (free testosterone).

So, some food for thought before you brew this:

If you base your brew numbers off 84% TD, and the remaining 16% impurities are lets say 10% free testosterone and 6% misc shit, then aiming for a 500 mg/mL TD oil depot means you’ll weigh about 595 mg of powder per mL to hit your target TD.

At that point, you’re also carrying along roughly:
60 mg/mL free testosterone (595 × 0.10 ≈ 59.5 mg)

Free test is lighter (higher testosterone base per mg) and behaves differently than TD, so that extra free hormone can increase the odds of crashing and potentially PIP, depending on your solvent system and how you would already be pushing solubility at 500 mg/mL

If you are referring to free decanoic acid as "unbound ester" then that's a whole different animal.

The GCMS report was showing free decanoic acid, not testosterone.

 

[TRM4451]

Hey Pench, unrelated to upcoming opening day, any possibility of DHB in the future? I thought I saw someone say it here a while ago but haven’t heard anything since.

 

[adrenalytic]

@OEP LABS hey brotha, got an email from you regarding an order, and I haven't placed one. I replied, but wanted to make sure that you got it, so you can reach out to whomever it was originally intended for.

Stop using your meso handle as your email. That's how scammers get you. Only copy and paste pench's email from his posts to initiate first contact. Then you can be sure it's safe to reply when he responds.

 

[Dial It In]

View attachment 379017

The GCMS report was showing free decanoic acid, not testosterone.

Yeah it’s a fatty acid and not uncommon. Your test is at the bottom. This is just a breakdown that caused an impurity nothing bad. Andro is the naughty one but not terrible terrible. Based of the purity of these raws it’s expected.

 

[adrenalytic]

Thats why new members to the forum dont like being here and important information arent spreaded around.

We don't want them here. If you can't rub two brain cells together and find a sources price list you are just another retard muddying up the forums with your useless posts.