Aburaihan Test E labs

He says he believes they are real, apparently it’s normal for the real ampoules to have slightly different amounts of oil. The packaging and ink on the vials is also identical to the products he’s seen.

I guess they just have less stringent QC compared to a company like Bayer which is evident from the difference in the amount of oil between the ampoules and the overdosing.
 
View attachment 142966Better examination of vials this morning they seem there or there abouts level wise.
I have been using this test for a little over 3 years. Those amps are exactly like the ones that I have been getting since I started using them. Each amp has 0.9mL...consistently. Are they real or fake? I cannot answer that, but I have also tested it and have bloodwork to show the test is real and it works.
 
I have been using this test for a little over 3 years. Those amps are exactly like the ones that I have been getting since I started using them. Each amp has 0.9mL...consistently. Are they real or fake? I cannot answer that, but I have also tested it and have bloodwork to show the test is real and it works.

Wait. It tested at 283 mg/ml, but it's missing .1 ml which is 28 mg.

283 mg minus 28 mg equals 255 mg. That would pretty much make it spot on.

Wouldn't it? Or does the testing mean it's 283 mg per .9 ml?
 
Yes mate. From TP. Bad experience on my first order with him, but he has more than made up for the mistake. Yet to start my cycle due to gyms been closed. But now looking forward to it. the Watson anavar looks promising for the back end of the cycle. Doing my bloods tomorrow for a base reading then again 4/5 wks in.

cheers for the input guys!
 
I just wanted to show you some photos of tested batch of Aburaihans, normally I dont post these, but wanted to show the seal they came with

Sometimes they come directly in boxes different batches mixed, sometimes sealed like the photos, I dont have option of choosing, as Iranian products are in low demand here, they all come from same source like other Iranian products, difference is Aburaihan has NEVER been consistent with boxes label etc, I dont recommend it to clients anymore as many say they are fake. Iran Hormone and Caspian have always had same label printing oil color etc. and been consistent with the way they look. Aburaihans have been lab tested 3 times, 2 of them without my prior knowledge and passed all the tests. Bloodwork has maybe been done 20 times Im not sure as most clients dont tell me they had bloodwork done.

I will probably send Caspians soon to @janoshik with some UGL stuff I have. I got lots of work for Jano soon. :) Out of stock of Iran Hormone enanthates.

Here are photos Im pretty sure no one will understand anything except @Ss99 's Iranian friend:

20210303_132845.jpg20210303_132840.jpg20210303_132851.jpg20210303_132828.jpg
 
The variation between the vials in terms of quantity of oil that you’ve mentioned really makes me doubt that they’re real, along with the 34mg more raw compound. The amount of oil in all of the Bayer (Testoviron and Rimobolan) and Balkan (Testosterone) amps I have is consistent between sources/batches/amps, even if they all are 0.1ml over 1ml.

I’d love to see some photos and I could also ask my Iranian bodybuilding friend what he thinks.

One thing you need to account for is the dead space in your syringe if using a Leur lock or slip. This dead space is nearly .08 ML. If an ampule is drawn w/an 18 gauge or filter needle combined with the dead space of the syringe, you are going to get .9 ML BEST CASE from an ampule that has exactly 1ML.

I have Balkan old-style nandrolone amps from @Turkish Pharmacy and I can never get a full ML. It is consistently .85-.9 ML. I'm using an 18 or 21 gauge to draw.

Bayer Rimobolan amps always have extra oil. 1.1ML+ even accounting for dead space so these amps probably have 1.2ML to account for the drawing of a filtering needle in a hospital and the dead space (up to .1 ML) of most intramuscular needles. This is a big big reason TRT guys in the US use insulin needles. There is ZERO dead space so you never lose any medication. Using Luer locks or slips will cause lost medicine every time. Sadly there is no way to draw and ampule with an insulin needle.
 
One thing you need to account for is the dead space in your syringe if using a Leur lock or slip. This dead space is nearly .08 ML. If an ampule is drawn w/an 18 gauge or filter needle combined with the dead space of the syringe, you are going to get .9 ML BEST CASE from an ampule that has exactly 1ML.

I have Balkan old-style nandrolone amps from @Turkish Pharmacy and I can never get a full ML. It is consistently .85-.9 ML. I'm using an 18 or 21 gauge to draw.

Bayer Rimobolan amps always have extra oil. 1.1ML+ even accounting for dead space so these amps probably have 1.2ML to account for the drawing of a filtering needle in a hospital and the dead space (up to .1 ML) of most intramuscular needles. This is a big big reason TRT guys in the US use insulin needles. There is ZERO dead space so you never lose any medication. Using Luer locks or slips will cause lost medicine every time. Sadly there is no way to draw and ampule with an insulin needle.
Check into the air bubble technique on how to account for that “dead space” you are referring to. You are basically drawing up .01ml of air after you draw up the .9ml of oil ( to account for the dead space) invert the syringe so the air bubble rises up to the plunger, then inject. That air bubble will ride down with the plunger while you inject and you can actually see every drop of oil- now all 1ml- get injected. A tiny amount of air getting injected IM is nothing to worry about, remember we are not talking about an IV injection where you really don’t want any air in your blood. I have been doing this technique for about a year now and have never had any problems beyond normal pinning issues ( nerves- sometimes a little extra blood- exc). Now I can actually get 10 1ml pins out of a vial instead of 9, makes a difference when you are cruising for a long stretch or running TRT.
 
One thing you need to account for is the dead space in your syringe if using a Leur lock or slip. This dead space is nearly .08 ML. If an ampule is drawn w/an 18 gauge or filter needle combined with the dead space of the syringe, you are going to get .9 ML BEST CASE from an ampule that has exactly 1ML.

I have Balkan old-style nandrolone amps from @Turkish Pharmacy and I can never get a full ML. It is consistently .85-.9 ML. I'm using an 18 or 21 gauge to draw.

Bayer Rimobolan amps always have extra oil. 1.1ML+ even accounting for dead space so these amps probably have 1.2ML to account for the drawing of a filtering needle in a hospital and the dead space (up to .1 ML) of most intramuscular needles. This is a big big reason TRT guys in the US use insulin needles. There is ZERO dead space so you never lose any medication. Using Luer locks or slips will cause lost medicine every time. Sadly there is no way to draw and ampule with an insulin needle.
I think you replied to the wrong person bud, I don’t use aburaihan test lol.

Anyway, I agree that the dead space is an issue if you are running anything that would be considered as HRT, once you start getting into the 300+mg a week range though the amount lost is minuscule in comparison to what you’re injecting so it isn’t an issue. Insulin needles should be the preferred way of injecting if on TRT because of that, prior to using them I would have to inject an extra 0.1-0.15ml on my ‘cruise’ depending on the brand of needle being used to account for the oil wastage that was reflected on my bloodwork.
 
One thing you need to account for is the dead space in your syringe if using a Leur lock or slip. This dead space is nearly .08 ML. If an ampule is drawn w/an 18 gauge or filter needle combined with the dead space of the syringe, you are going to get .9 ML BEST CASE from an ampule that has exactly 1ML.

I have Balkan old-style nandrolone amps from @Turkish Pharmacy and I can never get a full ML. It is consistently .85-.9 ML. I'm using an 18 or 21 gauge to draw.

Bayer Rimobolan amps always have extra oil. 1.1ML+ even accounting for dead space so these amps probably have 1.2ML to account for the drawing of a filtering needle in a hospital and the dead space (up to .1 ML) of most intramuscular needles. This is a big big reason TRT guys in the US use insulin needles. There is ZERO dead space so you never lose any medication. Using Luer locks or slips will cause lost medicine every time. Sadly there is no way to draw and ampule with an insulin needle.
Get 1 ml tuberculin syringes, attach a draw needle, then switch it out with needle of choice for injection. You'll get every last drop of oil.
 
I think you replied to the wrong person bud, I don’t use aburaihan test lol.

Anyway, I agree that the dead space is an issue if you are running anything that would be considered as HRT, once you start getting into the 300+mg a week range though the amount lost is minuscule in comparison to what you’re injecting so it isn’t an issue. Insulin needles should be the preferred way of injecting if on TRT because of that, prior to using them I would have to inject an extra 0.1-0.15ml on my ‘cruise’ depending on the brand of needle being used to account for the oil wastage that was reflected on my bloodwork.

Sorry, my mistake. I am on TRT and inject .4ML of test cyp twice per week so .15ML would be a major differece. If I ever just said screw it I'll inject an amp of test E per week I wouldn't worry so much about .9 or 1.1
 
Back
Top