Anyone brew sarms?

[Mariachi2]

Had trouble getting S-23 in to solution with 18% BB. Wasted a whole G.

Anyone have any luck with S23 or RAD?

 

[IndividualMan]

which source you got the raws from? if it was Panda, its probably not S23. S23 has a 98% oral bioavaliability. injectable doesnt change much. However, it should hold ~50mg/ml@ ~2BA/20BB in MIG812, Cottonseed, and castor oil.

also, S23 is cheap as hell, iirc SSA had 50 grams for 200 bucks, so you wasted only 4 dollars, not too horrible.

 

[Mariachi2]

Got mine from SB. Just a small amount and its been sitting in 5ML of BB for a few days and still barely dissolved .. applied heat to it too. Im hoping rad is more soluable. I guess there might be more nitrogen retention in injectable versions of the same compound i.e. winstrol

 

[IndividualMan]

Got mine from SB. Just a small amount and its been sitting in 5ML of BB for a few days and still barely dissolved .. applied heat to it too. Im hoping rad is more soluable. I guess there might be more nitrogen retention in injectable versions of the same compound i.e. winstrol

its the same compound. they dont differ in activity. no additional nitrogen retention.
the only difference is injectables wont mess up your digestion.
dont just make injectables for the sake of making injectables,
theres YK11 around, Adrol, Sdrol, Dbol, TNE, whatever you want, really. dont resort to brewing odd sarms to get yourself a good preworkout injectable.

 

[Mariachi2]

its the same compound. they dont differ in activity. no additional nitrogen retention.
the only difference is injectables wont mess up your digestion.
dont just make injectables for the sake of making injectables,
theres YK11 around, Adrol, Sdrol, Dbol, TNE, whatever you want, really. dont resort to brewing odd sarms to get yourself a good preworkout injectable.

There's a reason why sarms have appeal.. tissue selectively especially when it comes to dry gainers as opposed to DHT derivatives. I just got a hair transplant so Sdrol, Adrol, and YK is out of the question. My prostate ain't young either.

There's tons of reports out there of injectable Rad being far stronger than the oral version... same with S23. Everyone knows injectables hit your bloodstream harder. This is why people inject winstrol, anadrol or superdrol. Injectables hit harder.

 

[IndividualMan]

There's a reason why sarms have appeal.. tissue selectively especially when it comes to dry gainers. I just got a hair transplant so Sdrol, Adrol, and YK is out of the question.

There's tons of reports out there of injectable Rad being far stronger than the oral version... same with S23. Everyone knows injectables hit your bloodstream harder. This is why people inject winstrol, anadrol or superdrol. Injectables hit harder.

if you got a hair transplant, hands off the rad140. that shit can be fine for 3 weeks, wreck you the 4th. shedding you couldnt imagine.

S23 has 98% oral bioavaliability. the extra 2 percentage points are not noticeable.
They also dont hit your bloodstream that much harder. its about the same speed as Sublingual application. the reason to use injectables is to not mess up your stomach and gut, so you can take more/ for longer.

 

[Mariachi2]

if you got a hair transplant, hands off the rad140. that shit can be fine for 3 weeks, wreck you the 4th. shedding you couldnt imagine.

S23 has 98% oral bioavaliability. the extra 2 percentage points are not noticeable.
They also dont hit your bloodstream that much harder. its about the same speed as Sublingual application. the reason to use injectables is to not mess up your stomach and gut, so you can take more/ for longer.

I'll worry about the hair thing with adjusting the dose.
Lol bro I think you got it backwards. The only reason why people use orals is because they want to kick start the cycle while the esters start to build up.

The reason people make injectable orals is not just to avoid stomach issues, its because they hit harder and have a longer half life.. you should talk to people who done them..they use a smaller injectable dose for a reason. Nobody is injecting 50-100mg of Adrol..? Lol.. They are doing 15-20 for a reason

 

[IndividualMan]

why people use orals is because they want to kick start the cycle while the esters start to build up.

cavemen maybe, yeah. orals belong at the backend of the cycle to really push performance one last time. The kickstart thing is only done by impatient individuals.

The reason people make injectable orals is not just to avoid stomach issues, its because they hit harder and have a longer half life.. you should talk to people who done them..they use a smaller injectable dose for a reason. Nobody is injecting 50-100mg of Adrol..? They are doing 15-20 for a reason

higher peak AND longer half life is not possible in combination. either you get everything now, or it is a slowed release with a lower peak.

Many people do 50-100mg injectable adrol. I suspect the people who you have asked do 15-20mgs because they dont want to inject a full ml or two of a compound that can PIP massively if brewed wrong. It is uncomfortable if you pin a full ml in both lats and you het pippy lumps in both for the next two days.

Sdrol Inject is usually dosed around he 15-20 mg mark you mentioned. But thats a whole different beast.

 

[Mariachi2]

cavemen maybe, yeah. orals belong at the backend of the cycle to really push performance one last time. The kickstart thing is only done by impatient individuals.

higher peak AND longer half life is not possible in combination. either you get everything now, or it is a slowed release with a lower peak.

Many people do 50-100mg injectable adrol. I suspect the people who you have asked do 15-20mgs because they dont want to inject a full ml or two of a compound that can PIP massively if brewed wrong. It is uncomfortable if you pin a full ml in both lats and you het pippy lumps in both for the next two days.

Sdrol Inject is usually dosed around he 15-20 mg mark you mentioned. But thats a whole different beast.

Lol the guys I was talking to aren't injecting 50-100mg because of how fast it spikes their blood pressure.. it doesnt even come dosed that high...25mg/ML. You dont know what your talking about and your not answering my question i originally posted anyways. You just want to talk steroids like you know about them. Go find another thread

 

[IndividualMan]

Vendor on this thread carries it at 50mg/ml. Vendor on the french meso carries it at 60mg/ml. talking about not knowing stuff.
"i have only ever seen Adrol inject up to 25mg/ml, so thats the maximum there is" sybau

 

[IndividualMan]

answering my question i originally posted anyways

also, i did answer that one. 2/20 should work. if not, up the BA to 4%. use good high quality oil, and heat it up for a long time. 40-60% of the compounds melting point maximum.
Its stupid easy to brew.

There you have it, a full dummy tutorial on how to brew a compound that is better as a subL application and a transdermal gel.
IQlet

 

[Mariachi2]

Vendor on this thread carries it at 50mg/ml. Vendor on the french meso carries it at 60mg/ml. talking about not knowing stuff.
"i have only ever seen Adrol inject up to 25mg/ml, so thats the maximum there is" syba

Vendor on this thread carries it at 50mg/ml. Vendor on the french meso carries it at 60mg/ml. talking about not knowing stuff.
"i have only ever seen Adrol inject up to 25mg/ml, so thats the maximum there is" sybau

Just because some sketchy UGL is dosing at 50 doesnt mean people are injecting 100mg or 50mg for that matter. Maybe you should talk to people instead of making things up

 

[Mariachi2]

also, i did answer that one. 2/20 should work. if not, up the BA to 4%. use good high quality oil, and heat it up for a long time. 40-60% of the compounds melting point maximum.
Its stupid easy to brew.

There you have it, a full dummy tutorial on how to brew a compound that is better as a subL application and a transdermal gel.
IQlet

Coming from someone who's never injected orals to compare them to.

 

[Guzmanus]

man s23 is a total nightmare to get into solution i tried a while back and it just kept crashing no matter what i did. honestly 18% bb is way too low for that stuff you probably need to bump it up to like 25% and maybe even use some eo if you can get it. rad is usually a bit easier but s23 is just stubborn as hell. sucks about wasting a gram though that’s literally the worst feeling when you see it all clumped up at the bottom and realize you just flushed money down the drain. next time maybe try a higher solvent ratio or just stick to capping it because some of these sarms just hate being in oil lol

 

[IndividualMan]

weak bait.

Just because some sketchy UGL is dosing at 50 doesnt mean people are injecting 100mg or 50mg for that matter. Maybe you should talk to people instead of making things up

the other messages were better bait.

Anyone who goes to a seroius BBing/ Powerlifting gym knows plenty people who pin orals. usually full mls in both sides of the body.


you seem to be projecting quite a bit i nregards to people makign stuff up. You are asking stupid questions, saying factually incorrect things, you will get mean answers.

I have brewed S23. I have brewed Rad140. I have brewed TNE and Sdrol. Hell, I even made injectable anavar ( accidentally)
You are just some chump who cant brew and gets mad at others who have successfully done what he is failing to do for telling him neither he nor his sources/friends sources can brew properly.

 

[Mariachi2]

man s23 is a total nightmare to get into solution i tried a while back and it just kept crashing no matter what i did. honestly 18% bb is way too low for that stuff you probably need to bump it up to like 25% and maybe even use some eo if you can get it. rad is usually a bit easier but s23 is just stubborn as hell. sucks about wasting a gram though that’s literally the worst feeling when you see it all clumped up at the bottom and realize you just flushed money down the drain. next time maybe try a higher solvent ratio or just stick to capping it because some of these sarms just hate being in oil lol

Yea i think im just going to brew the rad and save the s23 for oral use. Probably going to start low with the rad to see how it dissolves then add more. I wasnt thinking and I dumped a whole gram of S23 into 2cc of solvents.

 

[Mariachi2]

weak bait.

the other messages were better bait.

Anyone who goes to a seroius BBing/ Powerlifting gym knows plenty people who pin orals. usually full mls in both sides of the body.


you seem to be projecting quite a bit i nregards to people makign stuff up. You are asking stupid questions, saying factually incorrect things, you will get mean answers.

I have brewed S23. I have brewed Rad140. I have brewed TNE and Sdrol. Hell, I even made injectable anavar ( accidentally)
You are just some chump who cant brew and gets mad at others who have successfully done what he is failing to do for telling him neither he nor his sources/friends sources can brew properly.

Guzmanus got me covered... time for you to go away.

 

[Mariachi2]

weak bait.

the other messages were better bait.

Anyone who goes to a seroius BBing/ Powerlifting gym knows plenty people who pin orals. usually full mls in both sides of the body.


you seem to be projecting quite a bit i nregards to people makign stuff up. You are asking stupid questions, saying factually incorrect things, you will get mean answers.

I have brewed S23. I have brewed Rad140. I have brewed TNE and Sdrol. Hell, I even made injectable anavar ( accidentally)
You are just some chump who cant brew and gets mad at others who have successfully done what he is failing to do for telling him neither he nor his sources/friends sources can brew properly.

Wait, you brewed S23? Wow sounds like it doesn't stay in solution from what happened to me and the poster above.... sometimes things just dont add up...

 

[IndividualMan]

Guzmanus got me covered... time for you to go away.

"got you covered" and he just said: "throw more solvents at it"

Yea i think im just going to brew the rad and save the s23 for oral use. Probably going to start low with the rad to see how it dissolves then add more. I wasnt thinking and I dumped a whole gram of S23 into 2cc of solvents.

thats the level of ability we are working with. I see.
alright, I will see myself out.
Hope you figrue it out at some point.
Good luck

Wait, you brewed S23? Wow sounds like it doesn't stay in solution from what happened to me and the poster above.... sometimes things just dont add up...

I told you. 2/20 in castor. 4/22 if you want it to hold for more than a day or two. It is a funky compound, but with the right amount of heat, solvents and the right oil you can make it work.
Overall, its just too much of a hassle to brew it when oral bioavaliability is so high. Which I also said already.
goodbye now