ARL Russia -Anabolic Research Labs-2019

[TRT@40]

@pharmasource, primo 200mg ml , tested 220mg = 150$ 0 pip... 4+1 free, good good job

They’re really not much higher.
100ml of Primo 100 = $380 = $38/vial
100ml of Primo 200 = $750 = $75/vial
100ml of Primo 150 = $525 = $75/vial

IF I did my math right. So while you’re getting more product with less pinning, for the same 1000 ml, ARL has all competitors beat. Even if they didn’t give the discount for the 100 ml jug, that’s $45/vial.

Not that I stand behind PS...
Comparing international source to international source...
For PS:
-20ml vial X 200mg/ml =4000mg for $150 means $37.5/gram
-With 3 +1, 16000mg for $450 meaning $28.13/gram

For ARL:
-100ml jug X 100mg/ml=10000mg for $380 meaning $38/gram

So just for the record, it is really $38/gram for ARL vs. $28/gram for PS.

@pharmasource, primo 200mg ml , tested 220mg = 150$ 0 pip... 4+1 free, good good job

Correction: It is buy 3 and get 1 free NOT buy 4 and get 1 free.

 

[T-Bagger]

Not that I stand behind PS...
Comparing international source to international source...
For PS:
-20ml vial X 200mg/ml =4000mg for $150 means $37.5/gram
-With 3 +1, 16000mg for $450 meaning $28.13/gram

For ARL:
-100ml jug X 100mg/ml=10000mg for $380 meaning $38/gram

So just for the record, it is really $38/gram for ARL vs. $28/gram for PS.


Correction: It is buy 3 and get 1 free NOT buy 4 and get 1 free.

Math never was my strong point, but I think I was pretty close lol. @ARL4Life needs to make some Primo 200 and price it competitively.

 

[balco]

I have a quick question; if I were to buy a jug, do I need to sterilize it and put into 10mL vials? Or does it come in a sterile 200mL vial? I guess it wouldn't make much sense considering it wouldn't be very sterile by the time you have used 20mL.

 

[Roger rabbit]

I have a quick question; if I were to buy a jug, do I need to sterilize it and put into 10mL vials? Or does it come in a sterile 200mL vial? I guess it wouldn't make much sense considering it wouldn't be very sterile by the time you have used 20mL.

If it came in a steril bottle... why would it not be steril after 20ml? Confused.

You sticking dirty, used needles in the vial to draw with?

 

[balco]

If it came in a steril bottle... why would it not be steril after 20ml? Confused.

You sticking dirty, used needles in the vial to draw with?

No...I mean it wouldn't be sterile because that many draws would damage the rubber stopper. If I use my 10mL test c for TRT doses (150mg/week) the rubber stopper gets thrashed by the time it's done.

 

[Delt123]

No...I mean it wouldn't be sterile because that many draws would damage the rubber stopper. If I use my 10mL test c for TRT doses (150mg/week) the rubber stopper gets thrashed by the time it's done.

Same problem, ill start using a smaller gauge. Even had to throw the vial away

 

[Heavy Iron]

I recently got some silicone stoppers and they are the shit! If I was selling 20ml vials I'd use those.

 

[balco]

Same problem, ill start using a smaller gauge. Even had to throw the vial away

That's a good idea, saving a few dollars isn't worth an infection or losing a limb. I rotate spots on the rubber stopper going in a circle then into the center, I never use same spots more than a few times.

 

[Delt123]

That's a good idea, saving a few dollars isn't worth an infection or losing a limb. I rotate spots on the rubber stopper going in a circle then into the center, I never use same spots more than a few times.

Yeah my dumbass was using the Same spot with a 18gauge. I could avoid the big floaters for a while but the last pin had a fuck ton of very Small particles in my syringe that I almost injected.

I never had this problem before but I'm glad that I dont have a abces right now Hahah.

I think ill use the 21gauge

 

[balco]

Yeah my dumbass was using the Same spot with a 18gauge. I could avoid the big floaters for a while but the last pin had a fuck ton of very Small particles in my syringe that I almost injected.

I never had this problem before but I'm glad that I dont have a abces right now Hahah.

I think ill use the 21gauge

Buy 25g for drawing, it's slow but your stoppers will last longer.

 

[T-Bagger]

I have a quick question; if I were to buy a jug, do I need to sterilize it and put into 10mL vials? Or does it come in a sterile 200mL vial? I guess it wouldn't make much sense considering it wouldn't be very sterile by the time you have used 20mL.

If I were to buy the 100 ml jug, I would filter it and dispense it to 10 ml vials.

 

[balco]

If I were to buy the 100 ml jug, I would filter it and dispense it to 10 ml vials.

Of course! I'm just asking if it's already sterilized and what kind of container it's in. Is it in a Gatorade bottle or a glass vial with rubber stopper?

I am curious because micron filters are expensive and I want to know what I would be getting myself into before hand.

 

[Roger rabbit]

No...I mean it wouldn't be sterile because that many draws would damage the rubber stopper. If I use my 10mL test c for TRT doses (150mg/week) the rubber stopper gets thrashed by the time it's done.

What gauge u drawing with?

 

[balco]

What gauge u drawing with?

22 normally

 

[Roger rabbit]

Yeah my dumbass was using the Same spot with a 18gauge. I could avoid the big floaters for a while but the last pin had a fuck ton of very Small particles in my syringe that I almost injected.

I never had this problem before but I'm glad that I dont have a abces right now Hahah.

I think ill use the 21gauge

Use a needle filter to draw with To prevent this[emoji106]

 

[Biggles48]

TA was 23 days. One of my vials came unlabeled and it is an obvious different shade than the other but had same color cap. After ARL looked into it for most of yesterday he said it was likely the same thing but a different batch. He later stated that it was...because the cap color was the same. He said it’s good, use is bro. So I have an unlabeled different colored oil in a vial that you want me to believe is what it’s supposed to be because someone put on a certain color cap? Tabs I ordered appear fine which was the main reason for the small order. Not a real loss for me...been running a domestic line of gear from another thread, who I know would’ve already unfucked this situation. It pisses me off on top of all the communication issues, email issues, order problems, money pickup issues and other shit from the beginning that resulted in what...about 15 to 20 PMs back and forth? Lol, live and learn biggles. Live and learn.

 

[T-Bagger]

Of course! I'm just asking if it's already sterilized and what kind of container it's in. Is it in a Gatorade bottle or a glass vial with rubber stopper?

I am curious because micron filters are expensive and I want to know what I would be getting myself into before hand.

My guess is that it's a big ass vial like the smaller ones with a rubber stopper. Since they don't sell semi-finished oils, it would be sterilized already. So yeah, get your wallet out and get yourself a micron filter and some vials.

 

[balco]

TA was 23 days. One of my vials came unlabeled and it is an obvious different shade than the other but had same color cap. After ARL looked into it for most of yesterday he said it was likely the same thing but a different batch. He later stated that it was...because the cap color was the same. He said it’s good, use is bro. So I have an unlabeled different colored oil in a vial that you want me to believe is what it’s supposed to be because someone put on a certain color cap? Tabs I ordered appear fine which was the main reason for the small order. Not a real loss for me...been running a domestic line of gear from another thread, who I know would’ve already unfucked this situation. It pisses me off on top of all the communication issues, email issues, order problems, money pickup issues and other shit from the beginning that resulted in what...about 15 to 20 PMs back and forth? Lol, live and learn biggles. Live and learn.

Dammit, I was going to make a order later this week. Thank you for giving the heads up, that's definitely not okay and ARL should make things right.

I'm always so appreciative when I see honest feedback, it really helps prevent other people from wasting time and money.

 

[Biggles48]

Yeah the problem is there have been some issues since making order that I’ve been pretty patient with and ARL rep here has always responded fast and is definitely trying to run the ship as well as he can, at least thats how ut seems. As a matter of fact a p.m. from ARL just popped up in my notifications. I’m not saying it’s bad at all. It may very well be a different batch with same stuff. But maybe it’s not.

 

[Delt123]

Use a needle filter to draw with To prevent this[emoji106]

Ill check that!

 

[Roger rabbit]

Yeah the problem is there have been some issues since making order that I’ve been pretty patient with and ARL rep here has always responded fast and is definitely trying to run the ship as well as he can, at least thats how ut seems. As a matter of fact a p.m. from ARL just popped up in my notifications. I’m not saying it’s bad at all. It may very well be a different batch with same stuff. But maybe it’s not.

Guessing games should never take place with something you are injecting.

ARL should have given money back and just said to toss whatever mysterious oil they sent.