MESO-Rx Sponsor Axle Labs - US Domestic

[accidentaljedi173]

So nobody going to apologize for calling Axle a liar about the heavy metals test? I 100% support increased testing and try to back people up on it, but it seems like even if this vendor complies completely people are not going to let this vendor redeem themselves. At what point does accountability become bullying?

Why does anyone need to apologize? The testing hasn't been produced or even ordered. He's done nothing yet, and even if he did nobody is strong arming him. I simply asked if he was down for it and he is. I just hope these samples don't get "lost" too

 

[dontletheoldmanin]

Why does anyone need to apologize? The testing hasn't been produced or even ordered. He's done nothing yet, and even if he did nobody is strong arming him. I simply asked if he was down for it and he is. I just hope these samples don't get "lost" too

Only takes 2 weeks to get samples out.
Go today I'm sure you have lots of samples to send. Then we can know by the end of January.

I sent and email asking Jano about these tests - Sterility testing consists of 2 tests (TAMC and TYMC) and costs they would need 1 unopened original vial for the test.

Heavy metals analysis checks for As, Cd, Pb, Hg - and if the original vial shipped for sterility is more than 2ml, then it is enough to send just 1 vial for both tests.

@Axle Labs , you dont need to say anymore, you've said you would which is now great

I've taken the work out for you. If you actually just don't want to, that's fine also.

 

[accidentaljedi173]

Only takes 2 weeks to get samples out.
Go today I'm sure you have lots of samples to send. Then we can know by the end of January.

I sent and email asking Jano about these tests - metals and sterility and was told in less than 7hrs they do these testings just send the items in.

@Axle Labs , you dont need to say anymore, you've said you would which is now all ok you.

Are you saying I need to send samples to Jano of axles gear? You got me a little confused here

 

[dontletheoldmanin]

Are you saying I need to send samples to Jano of axles gear? You got me a little confused here

Wrong responding messge. Apologize it was for Axle

 

[FastBun]

As confirmed about 3 times above, we are already doing this.

The current samples sent to jano can’t have the sterility tests added after emailing Jano. But we will send more samples in then to do the additional sterility testing.

here u go sweetcakes... maybe you are a visual learner..

 

[dontletheoldmanin]

@Axle Labs

Only takes 2 weeks to get samples out.

Go today I'm sure you have lots of samples to send. Then we can know by the end of January.

I sent and email asking Jano about these tests - Sterility testing consists of 2 tests (TAMC and TYMC) and costs they would need 1 unopened original vial for the test.

Heavy metals analysis checks for As, Cd, Pb, Hg - and if the original vial shipped for sterility is more than 2ml, then it is enough to send just 1 vial for both tests.

@Axle Labs , you dont need to say anymore, you've said you would which is now great

I've taken the work out for you. If you actually just don't want to, that's fine also.

 

[FastBun]

if the hplc test from a vial comes back good why would testing the raws matter? Does it indicate something else?

im starting to think that you are an axle alt... what do you mean what does it matter??? have you not noticed the dosing???

Mast-E (400mg/ml) -> 438.91 mg/ml
Ripper Blend (150mg/ml) -> 188 mg/ml
Tren-E (400mg/mL) -> 438.31 mg/mL

its funny to see Neo didnt test his raws and had better accuracy than this... thats a neo source btw... this is supposed to be an experienced source with heaps of knowledge bruv...

 

[SwolieGuacamole]

if the hplc test from a vial comes back good why would testing the raws matter? Does it indicate something else?

I have a hard time believing this is an actual question.

 

[FastBun]

@FastBun

There he goes again. How long you think it will take him to acknowledge the metal particles on the stirrer bar?

10 tries?

Post in thread 'Readalots Enhanced Testing'

Nov 3, 2024

Headline:
Readalot’s Enhanced Testing Audience Responds Defiantly

In a particularly swift stasis of events, absolutely nobody is surprised that the sky is, indeed, not falling after all.

Project 3. Forthcoming.

75 g batch of Tren Ace. Visible magnetic particles captured during raw AAS dissolution prior to filtering. I really respect this vendor for stepping up and doing the right thing. Surely other large batch vendors (>500 g batch) have seen similar but just haven't spoken out.

At least the stirrer bar doing an admirable job. But probably no metals in this...

• readalot

• 
• 

idk i give up lol... probably woudnt even admit after being poked by it... too hard for him not to lie...

 

[readalot]

idk i give up lol... probably woudnt even admit after being poked by it... too hard for him not to lie...

View: https://youtu.be/xHhzMVIR0k8?si=c3zGsV3Q9Ti_7O5-

 

[MindlessWork]

Think the axle is broken...

 

[MindlessWork]

@Axle Labs

Only takes 2 weeks to get samples out.

Go today I'm sure you have lots of samples to send. Then we can know by the end of January.

I sent and email asking Jano about these tests - Sterility testing consists of 2 tests (TAMC and TYMC) and costs they would need 1 unopened original vial for the test.

Heavy metals analysis checks for As, Cd, Pb, Hg - and if the original vial shipped for sterility is more than 2ml, then it is enough to send just 1 vial for both tests.

@Axle Labs , you dont need to say anymore, you've said you would which is now great

I've taken the work out for you. If you actually just don't want to, that's fine also.

Don't even bother..Axle will take a long time to respond to that or respond with flibbertigibbet nonsense

 

[glpfun]

wow I asked a simple question about testing raws vs final product because I didn’t know and people taking is as an affront for some reason. How does that make me an alt? I’m sorry if I misinterpreted the situation around the heavy metals test as well but literally almost all my posts around this have been in favor of increased testing. Why you guys being so defensive I’m on your side and not attacking you, you’re just assuming the worst about every question I ask and you’re wrong in the process so I have to wonder what else are you jumping to conclusions on? Because so far everything you’ve said about me could not be farther from the mark.

 

[accidentaljedi173]

wow I asked a simple question about testing raws vs final product because I didn’t know and people taking is as an affront for some reason. How does that make me an alt? I’m sorry if I misinterpreted the situation around the heavy metals test as well but literally almost all my posts around this have been in favor of increased testing. Why you guys being so defensive I’m on your side and not attacking you, you’re just assuming the worst about every question I ask and you’re wrong in the process so I have to wonder what else are you jumping to conclusions on? Because so far everything you’ve said about me could not be farther from the mark.

Coming from the guy saying we owe axle an apology

 

[Anat]

Right, you’ve got to keep the pressure on all vendors, no matter how great they were in the past or how badly they screwed up. Babe, it’s 2025 - if you want to keep customers, you need to run fresh tests every single time. Not all your clients are brain-dead gym bros who only use their heads for chewing. Some actually care about their gear being clean, accurately dosed, and free of toxic metals.

Here’s a thought: drop the ego and start paying attention to what the community actually wants. Without regular and transparent testing of gear, it’s just a waste of everyone’s time. Customers want quality and assurance, not empty promises. If you’re not consistently proving that your product is clean, properly dosed, and safe, people will move on - because trust isn’t built on words, it’s built on actions.

 

[Axle Labs]

Lmaooo… honestly… how are people still buying off you??? I’m baffled … you must be acting stupid…

Exactly.. magnetic stirrers… how else do you think the metal would stick to the magnet… unless you came up with another ingenious way of how a magnet works…

The metal is on the inside, we use these magnetic stirrers which spin at the bottom of our glass recepticals. There is no exposed metal.

 

[Axle Labs]

@Axle Labs

Only takes 2 weeks to get samples out.

Go today I'm sure you have lots of samples to send. Then we can know by the end of January.

I sent and email asking Jano about these tests - Sterility testing consists of 2 tests (TAMC and TYMC) and costs they would need 1 unopened original vial for the test.

Heavy metals analysis checks for As, Cd, Pb, Hg - and if the original vial shipped for sterility is more than 2ml, then it is enough to send just 1 vial for both tests.

@Axle Labs , you dont need to say anymore, you've said you would which is now great

I've taken the work out for you. If you actually just don't want to, that's fine also.

Yep, all in motion as I said.

 

[accidentaljedi173]

The metal is on the inside, we use these magnetic stirrers which spin at the bottom of our glass recepticals. There is no exposed metal.

View attachment 310255

Are you feeling ok?

 

[glpfun]

Coming from the guy saying we owe axle an apology

I literally apologized for misinterpreting that in the same comment you just responded to. Also someone else making a certain type of mistake doesn’t mean they don’t recognize the mistake in others. Again you’re barking up the wrong tree here with me. It’s becoming more apparent people are just using this to be a dick to people.

 

[Axle Labs]

Lmaooo… honestly… how are people still buying off you??? I’m baffled … you must be acting stupid…

Exactly.. magnetic stirrers… how else do you think the metal would stick to the magnet… unless you came up with another ingenious way of how a magnet works…

*Reply was to this comment. Regarding the stirrers.