DHB and TPP

[Zebedee]

+\-.01 cause my scale only goes to that. If i had a more precise scale it would be. More precise.

It is 10 mg. But its fine for me cause i dont mind for dbol or winny that bit.

One problem with that way of doing it is once you've used up a certain amount of the 1g of powder originally put on the scale, you're going to have too little weight to meet what's known in compounding as the least or minimum weighable quantity for your scales & your acceptable range of accuracy. Once you go below that, weighing accuracy could go out the window.

Eg, If your scales have a 10mg level of accuracy (0.01g), you'd need to keep at least 100mg on the scale at all times to get 10% accuracy (10mg divided by 0.1%). For 5% accuracy, it'd jump to 200mg's needed on the scale (10 divided by 0.05). How much accuracy you're going to lose below that minimum weighable quantity level (eg 100mg or 200mg), I don't know mate. Depending on your scales specs / quality, it could decrease exponentially for all I know, so it might be worth adding more powder to the scales at the start.

So, say for example you're wanting to cap 1g of powder - put 2g on the scale & capping 1g using the same method you used before, but with the extra (unwanted) 1g of powder there just to keep you well above the minimum weighable quantity level from start to finish.

Would be a really easy way of keeping things a bit more accurate too. Depends how anal you are though mate.

 

[Zebedee]

DHB - 100mg/mL
TPP - 150mg/mL
NPP - 150mg/mL

All brewed at:
1% BA
20% BB
3% Guaiacol
30/70 EO/MCT

How bad is the "guaiacol smell" like at 3%? Not whilst you're brewing, but when using the finished product?

 

[TheH0517]

How bad is the "guaiacol smell" like at 3%? Not whilst you're brewing, but when using the finished product?

Ehh, it’s there but it’s not overwhelming like when brewing. If brewing is a 10 on a 1-10 scale and 1 is non-existent, it’s about a 4 when pinning.

 

[jJjburton]

One problem with that way of doing it is once you've used up a certain amount of the 1g of powder originally put on the scale, you're going to have too little weight to meet what's known in compounding as the least or minimum weighable quantity for your scales & your acceptable range of accuracy. Once you go below that, weighing accuracy could go out the window.

Eg, If your scales have a 10mg level of accuracy (0.01g), you'd need to keep at least 100mg on the scale at all times to get 10% accuracy (10mg divided by 0.1%). For 5% accuracy, it'd jump to 200mg's needed on the scale (10 divided by 0.05). How much accuracy you're going to lose below that minimum weighable quantity level (eg 100mg or 200mg), I don't know mate. Depending on your scales specs / quality, it could decrease exponentially for all I know, so it might be worth adding more powder to the scales at the start.

So, say for example you're wanting to cap 1g of powder - put 2g on the scale & capping 1g using the same method you used before, but with the extra (unwanted) 1g of powder there just to keep you well above the minimum weighable quantity level from start to finish.

Would be a really easy way of keeping things a bit more accurate too. Depends how anal you are though mate.

Yes I have realized that. Thanks but because I use a mini teapot it already adds 2-3 gram to the scale. So when I add a gram of powder to the cup I just subtract as I go. 2.8,2.6,2.4. Even though I only have 1 gram. I dont tare the scale.

You could also weigh the all capped pills but I dont bother. It was pretty accurate when I tested 5 random pills when completed.

edit- taking full pil and subtracting an emtpy pill weight.

 

[Zebedee]

Yes I have realized that. Thanks but because I use a mini teapot it already adds 2-3 gram to the scale

You also mentioned that before, only I didn't register it & take it into account. Bit of a Doh! moment from me really!

 

[TRT@40]

DHB - 100mg/mL
TPP - 150mg/mL
NPP - 150mg/mL

All brewed at:
1% BA
20% BB
3% Guaiacol
30/70 EO/MCT

I pinned 1mL DHB with 1mL TPP last night and I can’t even tell. Thin, smooth, and painless so far. I’ll be pinning the DHB and NPP tonight.

View attachment 124415

Hey brother, did the pipless experience continue with DHB and TPP? Or you felt pip came on a couple of days after injection ?

 

[TheH0517]

Hey brother, did the pipless experience continue with DHB and TPP? Or you felt pip came on a couple of days after injection ?

The day after injection it feels like I never pinned. Day 2-3 after there’s minor PIP, but it’s not bad at all. Almost like a tren ace pin.

 

[Carolina Spanky]

Made DHB at 100mg/ml using 75% MCT 25% EO 18/2 BB/BA. Zero pip...

 

[TheH0517]

Right after my last response, I went to pin the first site I pinned this past Monday on my right quad. I noticed it’s pretty swollen. It still has a little pain (very very little) when the 2 spots I pinned after have no pain at this point. No redness, no warmth. I think the pain is from inflammation. I don’t think there’s any infection. I’ve had worse when I was ignorant and pinned 500mg/mL test in my Glute and had a half football on my ass. I’ll keep y’all updated.

 

[TRT@40]

Right after my last response, I went to pin the first site I pinned this past Monday on my right quad. I noticed it’s pretty swollen. It still has a little pain (very very little) when the 2 spots I pinned after have no pain at this point. No redness, no warmth. I think the pain is from inflammation. I don’t think there’s any infection. I’ve had worse when I was ignorant and pinned 500mg/mL test in my Glute and had a half football on my ass. I’ll keep y’all updated.

How many injections site do you use, brother? Either you are pinning often for shorter esters or you dont use enough injection sites.
I have 8 injection sites; glutes, quads, ventrogluteal, and delts. With pin every 3 days, it takes 24 days before i have to pin the same site again.
Hopefully, your quads has recovered from 1ml of each of DHB and TPP shot from a week ago!

 

[jJjburton]

How many injections site do you use, brother? Either you are pinning often for shorter esters or you dont use enough injection sites.
I have 8 injection sites; glutes, quads, ventrogluteal, and delts. With pin every 3 days, it takes 24 days before i have to pin the same site again.
Hopefully, your quads has recovered from 1ml of each of DHB and TPP shot from a week ago!

You cAn also go high medium and low woth quads. But when going low there is so many nerves its to frustrating.

 

[TheH0517]

How many injections site do you use, brother? Either you are pinning often for shorter esters or you dont use enough injection sites.
I have 8 injection sites; glutes, quads, ventrogluteal, and delts. With pin every 3 days, it takes 24 days before i have to pin the same site again.
Hopefully, your quads has recovered from 1ml of each of DHB and TPP shot from a week ago!

I have 6 sites. Glutes, quads, and delts. And I kinda alternate between the VG and glute so I’m not pinning the exact same spot. The glutes and delts have had absolutely no PIP. Both quads have had PIP, but they’re much better. I’ll try them again in a few days once they’re back to normal.

 

[Christiefresh1]

DHB - 100mg/mL
TPP - 150mg/mL
NPP - 150mg/mL

All brewed at:
1% BA
20% BB
3% Guaiacol
30/70 EO/MCT

I pinned 1mL DHB with 1mL TPP last night and I can’t even tell. Thin, smooth, and painless so far. I’ll be pinning the DHB and NPP tonight.

View attachment 124415

Hey dude where did you get the tubs for the capsules? Or what size are they. Thanks