What happened? Ph way off? Idk but I feel like making aminos and water based stuff is much more complicated than just oil stuff. Then again ive never tried to brew aminos or water based, but It seems to me more complicated.
MESO-Rx
Anabolic Steroids
Dirts Brew log
- Thread starter Dirthand
- Start date
Who knows, with the b12 in there dipping a ph strip in it just paints it red... . ..... the ph strips are color coded!! I've learned a lot today, and it's been a long one.... I really only making this crap cause a friend of mine kept bugging me about it, so I just bought him some from hyb that ended up being fake and now I feel obligated to produce some for him!! Im not sure what the doses on this stuff is but it's extremely thick at 600mg/ml. I also made some at 200mg/ml and some, 4mg/ml b12.. made a lot of shit today.. I learn best from experience!! You will never hear me say this often but I have way too much albuterol and b12 raw powder.. lol
Peace
All of this shit is definitely a learning curve fun yet stressful sometimes. Hopefully you get it down packed big bro! Good luck!
sinistral
Member
Last edited:
LGOP528
Member
Here is a way to find the displacement for a compound if you want to work it out. This is from another post I did explaining how I found the displacement for glutathione.Ok so we are defiantly not trying to fine tune a piano... But im doing the best i can. Steroid calculator has ruin me. however this is how figure it.. I just use the same value od displacement for albuterol as b12 if its off a little it will be ok. I am going to do the best I can do not the best YOU can do!
420ml WETF(What Ever The Fuck)
L-Carn 600mg/ml b-12 2mg/ml albuterol 2mg/ml
L-car i added 5 % to at the start to rate purity at 95%
420ml x 630mg =264600mg
264600 /1000= 264.6 grams
264.6 x 0.75= 198.45ml displacement
B-12 added 10% at start to rate at 90% purity
420ml x 2.2mg=924mg
924mg/1000= .924 grams
.924g x 0.74 = .648ml displacement
Albuterol added 15% to start to rate purity at 85%
420ml x 2.3 = 966mg
966mg/1000= .966g
.966g x0.74 =0.715ml
0.715ml +0.648ml +198.45ml= 199.813 we gonna call that an even 200ml and keep it simple.
200ml will be what we subtract from the ml total to account for powder displacement.
420 - 200= 220ml bac water
the only thing i have not been able to figure in the process is if i need to add acid at the end to get the ph level just right. shooting for between 7-8 i believe.. I will probly try and get this close when i make the bac from the beginning.
BAC water 1.5% ba
probly make 600ml just to have plenty
1.5% of ml600 = 9ml BA
600ml-9ml= 591ml distilled water
i need
264.6grams L- carn
.924grams B-12
.966grams albuterol
220lm BAC water
I will probly dissolve the latter 2 of the compound's first then start adding the L-car put a smiggin of heat to it mix it like hell and see what happens.. The only wild card is the amount of acid to put in to get the PH right.. but it will be ok as like i said .WE ARE NOT FINE TUNNING A PIANO!! I am waiting on the mail to run for my ph strips and acid!
Peace
D
I found the density for GLH but the important part is the units. It needs to be in g/cm^3. Now cm^3 is a ml. So the units could be written as g/ml. For displacement you want ml per gram or ml/g. This is because in the final step we are multiplying the weight of GLH in grams by the displacement to get the volume in ml that it displaces. So to get ml/g you divide 1 by the density. That gives the displacement in ml/g.
GLH density= 1.475 g/cm^3= 1.475 g/ml
Displacement= 1/1.475=0.678 ml/g
I used 6 g of GLH
Displacement volume= 6*0.678=4.068 ml
I confirmed the measurement by just adding the full 30 ml of bac and then measuring everything in a 50 ml syringe at the end. It seemed to work out. I have also back tested it against known testosterone valves.
The PH ended up at 7 for that batch of glutathione and it is smooth as water.
Excel.exe
Member
how much of each per ml? is there any place where recipes are shared?
We need a label log tutorial next, those things are great
Well despite all the great feedback I received on making a suspension instead of a solution.... (I have made some suspensions with humco) I am gonna go ahead and make a solution.. gonna try and raise this to 40mg/ml. I am cleared to start working out again and planning on adding some far in my stack at the start.. The worst that can happen is I got some nasty tasting shit to stomach down.. or throw away if it's that bad. I am gonna try adding some flavor to this..
Fuck it
D
Whatever... it was not very exciting.. I went with the original 20mg/ml cause that shit wasn't gonna disolve at 40.. we shall see how it hold and if the alcohol gives me heartburn before a workout.. gonna try it out tommarrow..
I would imagine this may hit a little quicker than a pill but have accurately dosed tabs is just way more convenient.. I got some var tabs coming from a couple different Chinese vendors I'm gonna sent in to test soon to see what they are talking about!!
I can't imagine it to be to hard to wet the whistle with couple ml's of this shit..
I would imagine this may hit a little quicker than a pill but have accurately dosed tabs is just way more convenient.. I got some var tabs coming from a couple different Chinese vendors I'm gonna sent in to test soon to see what they are talking about!!
I can't imagine it to be to hard to wet the whistle with couple ml's of this shit..
proper i told you so is in order.... I decided to try it for shits and giggles.. Talk about gag a fucking maggot.. threw that shit down the drain and gonna make a suspension real quick..
D
AnTabolic73
Member
That's var? I use everclear and make it at 10mg/mL. Stays in solution. Tastes like shit. I squirt it into a shotguns and then fill the rest with Gatorade or whatever I got to wash it down.
Works well for women cuz they use such small amounts. I usually run var at 50mg a day. And 5mL of everclear in anything kinda sucks.
I've tried 20mg/mL and it won't hold.
There is a message waiting moderator approval but I ended up pour that crap down the drain and made a solution. Nasty crap!!
Better!!
AnTabolic73
Member
I make 2 solutions. 10mg/mL var and 12.5mg/mL aromasin. Both are made with just everclear. It tastes horrible. You can't just drink it on its own. I have an oral syringe and a shot glass on my dresser. And I keep a sweet beverage(Gatorade or whatever) in my peptide fridge that's on my nightstand.
Asin tastes like shit as it is, in everclear just imagine. But 1 or 2 mL into a shot of Gatorade isn't horrible. Bottoms up.
The problem with solutions is even everclear isn't strong enough to dissolve some of the more stubborn raws. And there's not much else, that you can drink, you can use to dissolve the raws.
The only option is making really low dose. Like my 2 recipes above. Anything I've tried over 20mg/mL doesn't hold.
Superdrol, i forget, also holds in pure everclear at 10mg/mL. And it works well, since highest dose of superdrol is 20mg a day.
I have a capsule machine. It would alleviate all these issues. But making caps just suck. I hate it. I haven't used my capsule machine in years.
So I'm stuck just using everclear. I feel like a degenerate everytime I re up on a bottle. Who the hell actually drinks that stuff recreationally.
If you crack the oral solution code. You'll go down as a legend in this game.
Asin tastes like shit as it is, in everclear just imagine. But 1 or 2 mL into a shot of Gatorade isn't horrible. Bottoms up.
The problem with solutions is even everclear isn't strong enough to dissolve some of the more stubborn raws. And there's not much else, that you can drink, you can use to dissolve the raws.
The only option is making really low dose. Like my 2 recipes above. Anything I've tried over 20mg/mL doesn't hold.
Superdrol, i forget, also holds in pure everclear at 10mg/mL. And it works well, since highest dose of superdrol is 20mg a day.
I have a capsule machine. It would alleviate all these issues. But making caps just suck. I hate it. I haven't used my capsule machine in years.
So I'm stuck just using everclear. I feel like a degenerate everytime I re up on a bottle. Who the hell actually drinks that stuff recreationally.
If you crack the oral solution code. You'll go down as a legend in this game.
I will be a suspension or a tab guy... or maybe learn to make caps.
when I went in to get the pint of everclear they lady looked at me funny and said " we have the half gallons back there" I was thinking dam do i look like i do it like that. ( it was the first time i had been in a liquer store in over 6 years.. lol
Thats gonna be a hard no. Oxandrolone was designed to be taken orally, no need to reinvent the wheel IMO. I inject enough shit, no need in trying to find more spots to inject something daily that i can swallow.. Know what i mean dawg!
Peace
D
Whats the recipe for this? Looks tasty
Shit lets see
2 grams Oxandrolone powder
humco
fruit punch mio
30ml so its actually about 65mg/ml but i already had the labels printed from the last time i made var solution so i said.... fuck it looks good taste great.
I put the 2 grams powder on a lil paste and mortar smashed that shit til kingdom almost came. I already know exacally where the 30ml mark is on the container so i skipped the step on finding that.
Then i put just a hair bit of humco in the bowl and made a paste. poured the paste in the container. Washed out the bowel 2 times with a lil more humco. Put a squirt or 2 of the mio in the container then filled it to the 30ml mark with humco an shook that shit like an out of balance wheel down the freeway!!
put on label g2g
D
