Giant Labs *US Domestic Introduction*

[Giant labs]

32nd request for your filter info.

This is fucking retarded.

You don’t actually have ANYTHING. You are just posting for free to get a couple $100 in noob orders. You’re fucking pathetic.

“Tiny” from Giant Labs. Real fucking slick. You’re smarter than all the rest of us.

You post on a Tuesday trying to bypass the vetting and you still stumble and fall on your face.

Our filters are completely glass bottle top filtration systems. They come in three pieces, top bottom and a middle piece that connects the two. The middle piece has a place for the vacuum pump to attach to, which creates a vacuum to filter the gear through the filter. For those that know anything about filters, we use .22 filters that are placed in between the top and bottom, which is where the oil passes through which in turn filters the gear. Please let me know if you have more questions.

 

[Giant labs]

You don’t have any clue why he’s asking this though.

I guess I could have googled the answer to this too. But I did not and as stated before, I will have pictures of our raw stock posted as soon as possible. Thank you!

 

[mp46]

You are correct. Yes I did edit the post. I keep all calculations in a composition book as to not ever get confused. There is a big difference when brewing gear, and making liquid orals. My mistake as I hastily look into my book to return an answer to you. Two individuals have contacted me regarding sending in our anavar raw, and a few finished products. Soon you will see the quality.

Dude get the fuck out of here you had no clue what so ever. You’ve been doing this for years and had no clue? There’s absolutely no reason someone who has brewed before, even once would fuck up a rough estimate by a factor of 10. Then you claim you looked in your composition book and still answered “roughly” so you don’t even have a calculation at all, even written down. You’re a scam.

Do not order from this lab. He has no pictures of product, no pictures of filters, has admitted to unsterile techniques, and can’t explain the basics of brewing that even a home brewer should know.

 

[mp46]

I guess I could have googled the answer to this too. But I did not and as stated before, I will have pictures of our raw stock posted as soon as possible. Thank you!

If you don’t know why he’s asking and need to google it then you’re not fit to brew. This isn’t some home brew where close is an ok standard.

 

[ickyrica]

Wow. Just wow.

 

[BigBaldBeardGuy]

Our filters are completely glass bottle top filtration systems. They come in three pieces, top bottom and a middle piece that connects the two. The middle piece has a place for the vacuum pump to attach to, which creates a vacuum to filter the gear through the filter. For those that know anything about filters, we use .22 filters that are placed in between the top and bottom, which is where the oil passes through which in turn filters the gear. Please let me know if you have more questions.

Most of the guys here know more about filters than you have demonstrated that you know. So you can stop dumbing it down. Give us the specifics.

Filter Material

Manufacturer of the filter

How do you flush the filters between product

How frequent do you change the filters



You are dodging so many questions it makes you look shady and stupid. If you’re here to scam it’s obvious what you’re doing. If you’re legitimately here to source it’s time to open up and start being a little more transparent.

There’s only one guy here that would order. Since you already know he’s sending it for testing, the testing is going to be totally meaningless.

 

[Giant labs]

Dude get the fuck out of here you had no clue what so ever. You’ve been doing this for years and had no clue? There’s absolutely no reason someone who has brewed before, even once would fuck up a rough estimate by a factor of 10. Then you claim you looked in your composition book and still answered “roughly” so you don’t even have a calculation at all, even written down. You’re a scam.

Do not order from this lab. He has no pictures of product, no pictures of filters, has admitted to unsterile techniques, and can’t explain the basics of brewing that even a home brewer should know.

Please copy and paste the “unsterile techniques”

 

[mp46]

Our filters are completely glass bottle top filtration systems. They come in three pieces, top bottom and a middle piece that connects the two. The middle piece has a place for the vacuum pump to attach to, which creates a vacuum to filter the gear through the filter. For those that know anything about filters, we use .22 filters that are placed in between the top and bottom, which is where the oil passes through which in turn filters the gear. Please let me know if you have more questions.

I know what type of filter set up you claim to be using but I’m not even going to say it and help you out.

You can’t even answer basic questions let alone post pictures. What is the manufacturer and part number of the filter and what material is it made of?

 

[T-Bagger]

Please refer back to my replies last night. The grittiest raw? Hmmm well Var is quite “crstally” but exemestane is more of a “gritty” compound IMO

And what do you do with these gritty raws to prep them for mixing?

 

[mp46]

Please copy and paste the “unsterile techniques”

You’re using an baking oven. If you even knew how a basic kitchen oven worked you’d know why it’s not sterile. I’m not breaking it down for you since you can’t seem to break down any answer/question you get asked. A kitchen oven may be good enough for personal use in your mind but it’s not sterile and this isn’t for personal use.

 

[Giant labs]

Most of the guys here know more about filters than you have demonstrated that you know. So you can stop dumbing it down. Give us the specifics.

Filter Material

Manufacturer of the filter

How do you flush the filters between product

How frequent do you change the filters



You are dodging so many questions it makes you look shady and stupid. If you’re here to scam it’s obvious what you’re doing. If you’re legitimately here to source it’s time to open up and start being a little more transparent.

There’s only one guy here that would order. Since you already know he’s sending it for testing, the testing is going to be totally meaningless.

Totally meaningless? Well thank you for your input but this is exactly what was requested. I was also asked why I did not send in my own product, which to me would’ve been meaningless. I am not here to scam for a few dollars. Those who have requested orders for testing, will randomly pick a raw from the list, and a finished product. 5g of that raw will be provided, and two bottles of the finished product.

 

[Giant labs]

You’re using an baking oven. If you even knew how a basic kitchen oven worked you’d know why it’s not sterile. I’m not breaking it down for you since you can’t seem to break down any answer/question you get asked. A kitchen oven may be good enough for personal use in your mind but it’s not sterile and this isn’t for personal use.

I did not learn to do this overnight. I have been a Meso member for years and have seen many very solid sources use this technique. I have read through just about every page of every single source, and learned something from every one of them. An autoclave is the next purchase!

 

[mp46]

Totally meaningless? Well thank you for your input but this is exactly what was requested. I was also asked why I did not send in my own product, which to me would’ve been meaningless. I am not here to scam for a few dollars. Those who have requested orders for testing, will randomly pick a raw from the list, and a finished product. 5g of that raw will be provided, and two bottles of the finished product.

If you don’t test your own raws, how can you brew accurately? On that’s right, you can’t! Instead you wildly overdose your gear and hope you get it right.

You have no clue what you’re doing and you’re a danger to anyone who buys your gear, if it even exists.

 

[mp46]

I did not learn to do this overnight. I have been a Meso member for years and have seen many very solid sources use this technique. I have read through just about every page of every single source, and learned something from every one of them. An autoclave is the next purchase!

Just because a “solid source” used this technique doesn’t mean it was sterile, where are those sources now? Also please name some of those sources.

 

[Giant labs]

If you don’t test your own raws, how can you brew accurately? On that’s right, you can’t! Instead you wildly overdose your gear and hope you get it right.

You have no clue what you’re doing and you’re a danger to anyone who buys your gear, if it even exists.

Over the years I have built quite a solid relationship with my raw supplier(s) who regularly tests batches.

 

[Giant labs]

Just because a “solid source” used this technique doesn’t mean it was sterile, where are those sources now? Also please name some of those sources.

I am not here to compare myself to other labs nor will I ever mention one by name. I am here to prove myself and make a name for GL.

 

[T-Bagger]

I am not here to compare myself to other labs nor will I ever mention one by name. I am here to prove myself and make a name for GL.

I wish you were working with explosives instead of gear so you had a higher potential of an explosion and you could die in a horrible fiery death.

 

[Giant labs]

Most of the guys here know more about filters than you have demonstrated that you know. So you can stop dumbing it down. Give us the specifics.

Filter Material

Manufacturer of the filter

How do you flush the filters between product

How frequent do you change the filters



You are dodging so many questions it makes you look shady and stupid. If you’re here to scam it’s obvious what you’re doing. If you’re legitimately here to source it’s time to open up and start being a little more transparent.

There’s only one guy here that would order. Since you already know he’s sending it for testing, the testing is going to be totally meaningless.

I change the filters out every 250ml. Although some may think this is overkill and costly, it ensure the filters do not slow down, or get dirty. As far as the brand, our current ones are from overseas and do not have a “brand name” on them. They look identical to the all glass filter system by sterlitech, which I have used in the past. Our current ones are able to filter and hold more than the sterlitech from next day science.

 

[Giant labs]

I wish you were working with explosives instead of gear so you had a higher potential of an explosion so you can die in a horrible fiery death.

It’s not every day that someone wishes a “fiery death” upon me. Good morning to you too!

 

[T-Bagger]

It’s not every day that someone wishes a “fiery death” upon me. Good morning to you too!

Just being real. You’re dodging every single question here and the replies you give prove you’re a shit show. You claim you know your caps are accurately dosed yet you have only your manufacturers test results and not your own. You don’t know shit but speak like you do.

Once more - how do you get your oral raws to the same consistency as your filler?