Got bags of oil when ordering raws from Qingdao Sigma Chemical Co., Ltd (QSC)

Damn, this is why us older folks would never spoon feed information to anyone because of situations like this.

One idiot will hurt seriously hurt himself because of an information you freely gave out of good grace, and wham infection, overdosing or other health issues results from you being nice.

Very ugly picture for the community.
 
Damn, this is why us older folks would never spoon feed information to anyone because of situations like this.

One idiot will hurt seriously hurt himself because of an information you freely gave out of good grace, and wham infection, overdosing or other health issues results from you being nice.

Very ugly picture for the community.
It’s more than “good grace” this person I quoted doesn’t know what they are talking about and giving multiple recommendations in different brewing threads
 
In what you posted none of your math is correct

You said:
“200mg / ml
50 grams powder or liquid
250ml GSO
2% BA .5ml
20% BB 5ml BB”

None of that is accurate

Let’s assume you meant 250 ML final product because we can work with the 50 grams of raw you posted and the concentration of 200 mg/ml that you posted
And you said 2%BA and 20% BB

These are the actual correct values:

Test C
200 mg/Ml
Final volume -250 ML
Oil - 149.55 ML
Raw powder - 50 grams
BA 2% - 5 ML
BB 20% - 20 ML

I thought you were joking at first because what you posted had so many errors and incorrect information, but I noticed you have been posting around giving more incorrect information that a new person could potentially get confused by, so this needed to be addressed, starting with the simple math errors in your post on this thread.
your welcome, glad you enjoyed my posts

Can we see your corrections possibly?

Also if your making raws your not a new person, you have a background on cleanliness and safe practise

I don’t think anyone would attempt to make raws that dosnt have basic background knowledge

This isn’t a spoon feeding or hand holding thread it’s harm reduction
 
It’s more than “good grace” this person I quoted doesn’t know what they are talking about and giving multiple recommendations in different brewing threads
Also do you mind refraining from tarnishing my recommendations without offering your corrections?

All the advice I have given is on products that I have made and used personally, and I distributed for sale in the UK

I have never had any issues with any of these products and neither have my customers

We ain’t making Bayer or Schering don’t forget, we are making UG product that passes as a product that is free from contaminants and is safe to use
 
Also do you mind refraining from tarnishing my recommendations without offering your corrections?

All the advice I have given is on products that I have made and used personally, and I distributed for sale in the UK

I have never had any issues with any of these products and neither have my customers

We ain’t making Bayer or Schering don’t forget, we are making UG product that passes as a product that is free from contaminants and is safe to use
Quick question, in your honest opinion do you think OP has the aptitude to grasp the concept of brewing when he can't even recognize his mistake upon receiving his order?

Your methods are not great or flawed, any one with common sense can brew most compounds first try, most not everything.

The problem is giving advices to people who have no business brewing or doing AAS. It is clearly seen that OP didn't do any research on the get go.

I can't believe I have to spell this shit out sometimes.
 
Can we see your corrections possibly?

The corrections are at the bottom of his post

In what you posted none of your math is correct

You said:
“200mg / ml
50 grams powder or liquid
250ml GSO
2% BA .5ml
20% BB 5ml BB”

None of that is accurate

Let’s assume you meant 250 ML final product because we can work with the 50 grams of raw you posted and the concentration of 200 mg/ml that you posted
And you said 2%BA and 20% BB

These are the actual correct values:

Test C
200 mg/Ml
Final volume -250 ML
Oil - 149.55 ML
Raw powder - 50 grams
BA 2% - 5 ML
BB 20% - 20 ML


I thought you were joking at first because what you posted had so many errors and incorrect information, but I noticed you have been posting around giving more incorrect information that a new person could potentially get confused by, so this needed to be addressed, starting with the simple math errors in your post on this thread.
 
Quick question, in your honest opinion do you think OP has the aptitude to grasp the concept of brewing when he can't even recognize his mistake upon receiving his order?

Your methods are not great or flawed, any one with common sense can brew most compounds first try, most not everything.

The problem is giving advices to people who have no business brewing or doing AAS. It is clearly seen that OP didn't do any research on the get go.

I can't believe I have to spell this shit out sometimes.
Yup that’s a good point actually, I can see that now

I can see everyone here is just interested in keeping everyone safe, and keeping idiots at bay is important as it can negatively affect the industry

So I’ll keep my comments to myself

I just expected someone that bought raws to have a basic knowledge on temperatures and safe practise ( cleaning, sterility )
 
The corrections are at the bottom of his post
BA 2% of
The corrections are at the bottom of his post
no he has said 2% BA is 5ml, if it is 250
The corrections are at the bottom of his post
The corrections are at the bottom of his post
You have here:

250ml final product

Then he has put 5ml BA for 2%, this is incorrect

If a litre is 2% this gives us 2ml

Then we cut that into a fourth to get 250ml

That means the 2ml gets cut into a fourth as well

.5ml
 
BA 2% of

no he has said 2% BA is 5ml, if it is 250


You have here:

250ml final product

Then he has put 5ml BA for 2%, this is incorrect

If a litre is 2% this gives us 2ml

Then we cut that into a fourth to get 250ml

That means the 2ml gets cut into a fourth as well

.5ml
Please everyone never use more then 1-2 mls BA for a litre of finished product, it is not necessary and it burns

It will be hard to sell and use, Pfizer dosnt use anywhere near this much

1 litre of finished product should never need more than 1-2 Ml BA total

The person commenting has suggested 5ML BA in 250mgs, this will burn like hell

The old school guys do this to ‘kill germs’
 
For anyone that finds this, despite the horrible community here. I'm assuming that the Texas heat caused what was a raw powder to turn to liquid. The melting points for both are close to 90 and it's been over 100 for most of the summer.

I'll send some off for testing, but won't be back here again.
people here are retarded lol basic questions instantly make them pms.
 
Also do you mind refraining from tarnishing my recommendations without offering your corrections?

All the advice I have given is on products that I have made and used personally, and I distributed for sale in the UK

I have never had any issues with any of these products and neither have my customers

We ain’t making Bayer or Schering don’t forget, we are making UG product that passes as a product that is free from contaminants and is safe to use
I absolutely corrected you . Do you have a problem being able to read properly?
I quoted what you said, and then gave all the correct values and explained where you were incorrect. How much more clear can I possibly be?
 
Last edited:
BA 2% of

no he has said 2% BA is 5ml, if it is 250


You have here:

250ml final product

Then he has put 5ml BA for 2%, this is incorrect

If a litre is 2% this gives us 2ml

Then we cut that into a fourth to get 250ml

That means the 2ml gets cut into a fourth as well

.5ml
Bro your math is way wrong

You need to stop
In this very thread you stated that you don’t even know how to filter but you are writing long brewing instructions that are completely wrong with incorrect math
I don’t know if you are high or mentally I’ll but this isn’t the place for this people can get hurt if they take your advice
 
Last edited:
BA 2% of

no he has said 2% BA is 5ml, if it is 250


You have here:

250ml final product

Then he has put 5ml BA for 2%, this is incorrect

If a litre is 2% this gives us 2ml

Then we cut that into a fourth to get 250ml

That means the 2ml gets cut into a fourth as well

.5ml
This is wrong

Here is the correct values again on 250 ML final product 200 mg/ml
2% BA
20% BB
I screenshot the calculator so there is no discrepancies because you clearly can’t read or do simple math
 

Attachments

  • IMG_0180.jpeg
    IMG_0180.jpeg
    712.5 KB · Views: 34
Please everyone never use more then 1-2 mls BA for a litre of finished product, it is not necessary and it burns

It will be hard to sell and use, Pfizer dosnt use anywhere near this much

1 litre of finished product should never need more than 1-2 Ml BA total

The person commenting has suggested 5ML BA in 250mgs, this will burn like hell

The old school guys do this to ‘kill germs’
What the fuck are you saying?

It’s a percentage, the percentage changes with the volume of product

To say to never use more than 1-2 ML of BA ever is wrong. There is no maximum when you are doing a percentage of the total volume

Stop with your bullshit incorrect information
First off you shouldn’t be giving advice on brewing to a person that doesn’t even understand the melting point of raws but more than that everything your saying is wrong and your math is wrong
STOP
 
Biggest retard was the original poster
This whole thread could have ended with "look up melting points" and instead we got a half dozen people giving themselves strokes over the dudes question and how new people not spending 450 hours digging up every last bit of cryptic and obscure information is somehow the end of the world.

Information is not exactly readily available here and the people who think otherwise want you to read through hundreds of pages of retarded posts where 95% of the content is illegible unrelated tranny rage garbage with the argument that the answer to your question is on page 276 of whatever the fuck thread in whatever the fuck category.

Most people don't even know what questions to ask let alone how to find answers and when they eventually do find themselves with a question, they're met with hostility and people calling them irresponsible and ignorant lol. It's really funny to watch, peak irony.
 
Its not hard to google the melting point of a substance that you purchase, and that's the first port of call rather than showing your ignorance here

Also the op knew he was ordering a powder (or should have its quite obvious)
 
Its not hard to google the melting point of a substance that you purchase, and that's the first port of call rather than showing your ignorance here
It's not reasonable to assume people would know that a powdered compound would melt at nearly room temperature and the same compound is always eventually dissolved in oil so his confusion is even more justified.
You're expecting a line of reasoning that is normal for you because of your experience but not even close to common sense for most others. It's shocking to me that people sperg out about this shit so hard in the earlier comments.
 
This whole thread could have ended with "look up melting points" and instead we got a half dozen people giving themselves strokes over the dudes question and how new people not spending 450 hours digging up every last bit of cryptic and obscure information is somehow the end of the world.

Information is not exactly readily available here and the people who think otherwise want you to read through hundreds of pages of retarded posts where 95% of the content is illegible unrelated tranny rage garbage with the argument that the answer to your question is on page 276 of whatever the fuck thread in whatever the fuck category.

Most people don't even know what questions to ask let alone how to find answers and when they eventually do find themselves with a question, they're met with hostility and people calling them irresponsible and ignorant lol. It's really funny to watch, peak irony.
Nobody is having a stroke, don't be dramatic lol.

Most questions are so basic it spills out one's aptitude right away. What is frowned upon is laziness not ignorance. If you're not even bothered to read stickies or use the search function like a sane adult, but instead inspect answers handed to you by some strangers in the forums I don't think you should be doing drugs.

99% of all the questions have been asked, there are threads about all the topics created by numerous members already. Information is so easily accessed with our smart phones and yet here we are with people getting frustrated because their questions aren't answered directly.

If your reading comprehension is sub par or need guidance on your journey, hiring a good coach is a better choice than buying gear.
 
Back
Top