HYB (Best Service and Product - International Shipping)

[dasking]

if they weren't crashing before they got cold, and are not crashing you aren't fully dissolving the crystals in solution and its creating nucleation points. If you have a laser pointer you can shine it through the vial to detect micro crystals that have still not dissolved. At least this is what we do in the lab to rest for the presence of nano crystals/particles in solution.

very interesting, any laser pointer will work?

 

[dasking]

I want to add, I brought it (My mast 200 issue) to the attention of my rep on telegram and they offered to double replace it essentially with my next order after I had already stated I expect nothing just making you guys aware.

 

[dasking]

Slightly worrying, I got a couple of Mast-200 on the way too. I can refilter them so hopefully mine aren't as bad as yours if bad at all.

Let us know lol, I will determine if I take there consolation prize.

 

[Var1]

I appreciate the advice fellas, it's been discussed im just providing an updated pic.

I think you missed the part it's been reheated many times it is not crashed, I talked to a few long standing knowledgeable fellas here when I first posted it. I really am just providing a better more updated pic not even worth filtering it out im just tossing that

What was your method of reheating buddy ?

 

[dasking]

What was your method of reheating buddy ?

first used the toasty spot above my fridge nook, then my stupid hot but not boiling and melting plastic hot water while in multiple layers of bags, Then I used my hot plate with a needle in the top to breath and got it up set it at 200f but doubt highly I got the oil to 200. It looked to clear but under better light it was just a fine thin cloudy matter inside

 

[Var1]

first used the toasty spot above my fridge nook, then my stupid hot but not boiling and melting plastic hot water while in multiple layers of bags, Then I used my hot plate with a needle in the top to breath and got it up set it at 200f but doubt highly I got the oil to 200. It looked to clear but under better light it was just a fine thin cloudy matter inside

Reason I ask is 200f is 93c , melting point is 114c - 120c , 249f . I’ve had vials of mast , dhb, tren base that looked like yours, hair dryer, boiling water, radiator just isn’t hot enough. If you’re going to bin in away? It wouldn’t hurt to try what I suggested

 

[Yura(HYB)]

I'm very sorry! I've been busy solving shipping and product issues recently, so I haven't been active on the board! Here are some questions that everyone is concerned about!
: Has the shipping been resumed:
Yes, we have communicated everything with the new shipping company, and are currently sending packages in order for delayed orders. Customers who order now will have a certain degree of delay in sending packages (especially in the United States). Orders from the United States will be greatly delayed because the inspection rate in the United States is very high: 30% probability of being inspected, so we must wait for the shipping company to figure out everything before sending packages to customers.
: Have orals been tested:
We have sorted out and sent some orals to Janoshik for testing. The results will be announced here after they are obtained.
: Are there any Christmas events:
I'm sorry to customers who are looking forward to our Christmas events, because we have a lot of things to solve now, so we don't plan to hold events for the time being, because it will make us more chaotic. For a better customer experience, we will deal with everything first and then if there is a chance, we will do some more cost-effective events.
In addition, if you have any questions about the product and tracking, you can send me an email directly, and I will answer your questions as soon as I see it.
yuraPeptide@proton.me

Any customer who cannot wait can request a refund!

We understand the customer's anxious mood, but please give us some time, we need to ensure the safety of transportation! !

 

[Benf15harp]

I'm very sorry! I've been busy solving shipping and product issues recently, so I haven't been active on the board! Here are some questions that everyone is concerned about!
: Has the shipping been resumed:
Yes, we have communicated everything with the new shipping company, and are currently sending packages in order for delayed orders. Customers who order now will have a certain degree of delay in sending packages (especially in the United States). Orders from the United States will be greatly delayed because the inspection rate in the United States is very high: 30% probability of being inspected, so we must wait for the shipping company to figure out everything before sending packages to customers.
: Have orals been tested:
We have sorted out and sent some orals to Janoshik for testing. The results will be announced here after they are obtained.
: Are there any Christmas events:
I'm sorry to customers who are looking forward to our Christmas events, because we have a lot of things to solve now, so we don't plan to hold events for the time being, because it will make us more chaotic. For a better customer experience, we will deal with everything first and then if there is a chance, we will do some more cost-effective events.
In addition, if you have any questions about the product and tracking, you can send me an email directly, and I will answer your questions as soon as I see it.
yuraPeptide@proton.me

Any customer who cannot wait can request a refund!

We understand the customer's anxious mood, but please give us some time, we need to ensure the safety of transportation! !

Blah blah blah
Do you test your raws or not?

 

[Yura(HYB)]

Blah blah blah
Do you test your raws or not?

Testosterone Enanthate

Janoshik Analytical

Testosterone Cypionate

Janoshik Analytical

Oxandrolone

Janoshik Analytical

Trenbolone Acetate

Janoshik Analytical

Trenbolone Enanthate

Janoshik Analytical

 

[Benf15harp]

Testosterone Enanthate

Janoshik Analytical

Testosterone Cypionate

Janoshik Analytical

Oxandrolone

Janoshik Analytical

Trenbolone Acetate

Janoshik Analytical

Trenbolone Enanthate

Janoshik Analytical

so some, not all.
Was gonna give ya the freeman clap but I’ll go with a less enthusiastic clap

 

[HereToTeachAndLearn]

Do you provide any incentive for testing? Thanks.

I am asking because I recently purchased raws from you, DHB, which I plan on sending for testing.

 

[dasking]

Reason I ask is 200f is 93c , melting point is 114c - 120c , 249f . I’ve had vials of mast , dhb, tren base that looked like yours, hair dryer, boiling water, radiator just isn’t hot enough. If you’re going to bin in away? It wouldn’t hurt to try what I suggested

I appreciate the advice again it's just not worth my time and effort currently especially when I can take a completely crystallized vial of test cyp and have it rebound from a fraction of the effort. There is little any one can say to me at this point to convince me warming it will be ok only. Especially in MCT oil it should not need much higher temps.

This absolutely will never enter my body without, treating it like im homebrewing a batch or it will be tossed. Once I receive my replacement vials maybe I will try and recover it and filter them together but it's not even worth the 3$ filter to me atm.

( i don't think I said I was tossing it ever it's just 1 vial as an extra so trying harder and using up my filters isn't worth it yet)

 

[Yura(HYB)]

Do you provide any incentive for testing? Thanks.

I am asking because I recently purchased raws from you, DHB, which I plan on sending for testing.

We support customers to test products. The provider needs to be marked as: HYB
If the test fee is less than 100USD. We will provide a threshold-free store credit equal to the test fee in your next order. If the test fee is higher than 100USD and less than 500USD, we will provide a threshold-free store credit of 100USD in your next order. If the test fee is higher than 500USD, we will provide a threshold-free store credit of 200USD in your next order.