Jsj1
Well-known Member
Idk man im having flashbacks of jesus fish vials
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Good morning all,
I am MLI.
I will keep this brief as my pastebin will explain the ordering process, and I can only assume everyone can read.
Sterilization: Vials come pre-washed, but go into an alcohol bath and then a distilled water bath. After that it is straight into a dedicated dry heat oven for 45 minutes at 475-500 degrees.
I follow this same procedure with graduated cylinders, beakers and media jugs. The cleaner you start the cleaner you finish.
Clean suit, mask( level 3) and gloves always worn.
Lab grade scale is used and cleaned often.
Stoppers come pre-washed also and are dry heat sterilized at 250F for 1 hour.
An auto-filler is used currently, all vials are filled to 13mL. It is broken down, washed and sterilized between every run. I also run filtered oil (MCT)(100mL) through it prior to any filling. I also run off the head of any compound run to guarantee product purity/accuracy.
Filtering: This is very straight forward. I use ZapCaps with the preglass filter and a vacuum pump into a media jug. This process is currently in the process of being upgraded. When it is, everyone will know.
I am also hand capping for now, this is another process that will be upgraded.
I do not have a positive pressure lab, unfortunately. I have a hepa air filtration system that filters the air 4 times an hour, 24 hours a day, unless vial filling.
Opsec: VPN and Tor always. Email deleted constantly and tracking will not be given out unless there is no TD in 7 days. Then I will be the one looking at tracking. This is for your safety.
Now, to the good stuff. I am a small operation, I have never open sourced. I have come here with the intent to help the community with accurately dosed gear and make contributions to AL. Being a small operation I will not be able to support the numbers like some sources have here in the past, at least right away. My private track record so far has been very good. T/A times 2-4 days, happy customers and results.
All orals are suspensions. Alcohol, humco, and two tasty secret flavorings.
I already have several finished oil test results and plenty of gear porn to show.
Tits, pastebin, test results and gear porn to follow.
I will post test results, but do not have crumple paper pictures on hand.
I have left a lot out and I would rather answer the specific questions anyone has...
Let the roasting begin boys.
It’s all suspension...Have you sent any of your caps off to jano for testing?
It’s all suspension...
Also @MLI
If you are an active member in Meso
You'll know I was being VERY nice and respectful on that post. (I'm usually a super asshole)
But I want responses to all of those questions, no skipped ones.
Or I'll be happy to turn it up a notch or two
Good day sir,
No hades discord for me.
The current situation doesn't allow me to create the environment you're proposing. I understand fully how much it would help. Thank you for your knowledge.
I have not found floaters in my finished oils before.
Why did you cover up Masked Liberty Industries on the jano test results?
Also why haven’t any of your oral solutions been tested?
Why did you cover up Masked Liberty Industries on the jano test results?
Also why haven’t any of your oral solutions been tested?
Idk man im having flashbacks of jesus fish vials
Turn it up so meso hates this guy, I’m not in the mood to share! Still shocked that mli came to meso..Also @MLI
If you are an active member in Meso
You'll know I was being VERY nice and respectful on that post. (I'm usually a super asshole)
But I want responses to all of those questions, no skipped ones.
Or I'll be happy to turn it up a notch or two
LOLTurn it up so meso hates this guy, I’m not in the mood to share! Still shocked that mli came to meso..
How long has he been around?Turn it up so meso hates this guy, I’m not in the mood to share! Still shocked that mli came to meso..
Exactlylol, the Jesus fish vials will be replaced with little Red Devils.
Pics of lab? Idk about anyone else, but I wouldn’t want gear that’s been brewed on a stove top.
Also- Does your wife just so happen to be a pharmacist? Has a tree fallen on your house in the last 4 months? Lmao. Asking for a friend
I’m busy reading his post under his original user name Masked Liberty
Welcome to MESO
Your recent lab reports are missing report “Task Number 07607” and “Task Number 07609” what analysis was that done for? Why were they omitted.
With those blue gloves on I can’t tell if you have gritty working man’s hands or soft supple fancy pants hands. Which is it?
Did you stop selling local? If not, you should. MESO is a google indexed site so if local LE sees MLI vials in the IROC while pulling Johnny Football over, they’re going to quickly realize it’s a bigger operation. Guys that source here shouldn’t be slinging vials where they sleep.
Do you inspect each individual vial? We had a good source here make a major blunder recently and previous to that we had two would-be sources send out the warm and fuzzy gears. As a result, we’re particularly vigilant towards floaters at the moment.
What filter membrane are in the zap caps?
That’s a lengthy list of injectables. And you offer MCT, with GSO by request? That’s going to be hard to keep up with on inventory. You know what you’re stepping into here, right?
Liquid orals. Good, no capping questions. But all oral products come with alcohol? There are a lot of guys here in recovery. You would do better to omit the alcohol.
Lastly, we expect sources to be available here. This is YOUR business, show us that you give a fuck by being here. We are needy bitches and we crave attention more than a bipolar teenage girl that likes her teacher. You are expected to check in frequently even if it means riding your kids BMX up to the McD’s for WiFi. If MLI goes MIA you’ll have to scroll past endless stupidity to sort thru the posts. Check in often and show us how much you love us.
I know I know. The rules changed and that’s not fair. We adapt at MESO and the last source made it increasingly more difficult to please us.
Probably longer than I’ve used him.. only known he’s been around for a year or so..How long has he been around?
Why did you cover up Masked Liberty Industries on the jano test results?
Also why haven’t any of your oral solutions been tested?
Have you sent any of your caps off to jano for testing?
No caps, I do not cap. Where is this coming from?
No caps, I do not cap. Where is this coming from?
Good morning all,
I am MLI.
I will keep this brief as my pastebin will explain the ordering process, and I can only assume everyone can read.
Sterilization: Vials come pre-washed, but go into an alcohol bath and then a distilled water bath. After that it is straight into a dedicated dry heat oven for 45 minutes at 475-500 degrees.
I follow this same procedure with graduated cylinders, beakers and media jugs. The cleaner you start the cleaner you finish.
Clean suit, mask( level 3) and gloves always worn.
Lab grade scale is used and cleaned often.
Stoppers come pre-washed also and are dry heat sterilized at 250F for 1 hour.
An auto-filler is used currently, all vials are filled to 13mL. It is broken down, washed and sterilized between every run. I also run filtered oil (MCT)(100mL) through it prior to any filling. I also run off the head of any compound run to guarantee product purity/accuracy.
Filtering: This is very straight forward. I use ZapCaps with the preglass filter and a vacuum pump into a media jug. This process is currently in the process of being upgraded. When it is, everyone will know.
I am also hand capping for now, this is another process that will be upgraded.
I do not have a positive pressure lab, unfortunately. I have a hepa air filtration system that filters the air 4 times an hour, 24 hours a day, unless vial filling.
Opsec: VPN and Tor always. Email deleted constantly and tracking will not be given out unless there is no TD in 7 days. Then I will be the one looking at tracking. This is for your safety.
Now, to the good stuff. I am a small operation, I have never open sourced. I have come here with the intent to help the community with accurately dosed gear and make contributions to AL. Being a small operation I will not be able to support the numbers like some sources have here in the past, at least right away. My private track record so far has been very good. T/A times 2-4 days, happy customers and results.
All orals are suspensions. Alcohol, humco, and two tasty secret flavorings.
I already have several finished oil test results and plenty of gear porn to show.
Tits, pastebin, test results and gear porn to follow.
I will post test results, but do not have crumple paper pictures on hand.
I have left a lot out and I would rather answer the specific questions anyone has...
Let the roasting begin boys.