You must be a beast !!!!
MESO-Rx
Anabolic Steroids
MESO-Rx Sponsor Pharmacom Labs officials and our Basicstero.com store
- Thread starter PHL Official
- Start date
naturalkon
New Member
Yes. This.
double-leg
New Member
Do you run year round? Sometimes your body becomes desensitized to the compounds if you run year round. Thats a hefty cycle though bro! Honestly my chest hurts and i feel terrible with more 1.5gm of any compound or mix of compounds. Like a drowning feeling or out of breath.
^^^^same here!!
naturalkon
New Member
Nah man. Not yet. Gonna try to get there.
double-leg
New Member
That mast make you wanna fuck anything. Literally anything.
naturalkon
New Member
Haha. No doubt. Honestly I generally start high back it down then ramp it up towards the end. But I'm always impatient to see how strong everything is. And like I said I'm not impressed. 700mgs a week usually effects me differently. I'll keep everyone updated.
Johnb49e
Member
Seems so far so good as of now. Tomorrow is the start of week 4. I've gained like 6 pounds, assuming some is water. My strength is increasing, not sure if it was just a mental block though and the gear helped push me through it, but I definitely feel AND look fuller with more veins popping out of my shoulders which is nice. But these next couple weeks should be the real indicator you know, and when I get bloods done. My stuff right now is from Darius though but I just ordered some stuff from frank too.
DeM0NiCs
New Member
I've been pinning the pharmacom tren ace for two days at 100mg a day and I can't take the sides ( have 4 year old with behavior issues). Here's what I've noticed. Coughing a lot of it seems to last 6 hr or so after pin. Can't sleep at night my brain is thinking about stupid random shit although no night sweats. Been really irritated pause my anger which I'm good at but I might have a heart attack cause this takes a lot of mental effort. I am going to cut dose in half and if that don't work throw the shit in the old garbage can. Just my experience take it how you want. I also ran sust and test e from pharmacom and both seem fairly on point. Edit : FYI all orders have been from us.basicstero
Set a 20lb deadlift PR today, and could have kept going, after deadlifting maybe 6 times in the last 3 months...
I'm not saying Pharmacom is GTG, but I'm happy with the stuff I'm on right now.
I'm not saying Pharmacom is GTG, but I'm happy with the stuff I'm on right now.
Hey guys! I have lot of pm as always, also haven`t read yet, what is written here. Will reply to all this a bit later, have some issues to solve. Now just news for you, finally we have our Pharmamix 5 (trenbolone base, testosterone base, stanozolol)and adrol 50 inject. Bot are available for order in our international store. Also today and tomorrow are last days of our promo - place an 300$ order and get 200$ bonus. Cheers.
Hey all! Finally I received our next video. It has been showed not all I hoped you to see, however better as nothing.
Video Removed
On this video you can see washing of our vials before manufacturing and preliminary sterilization as well as a part of amps production video.
This video has been done just by a regular employee with a regular camera, not professional filming. So he didn`t showed the entire process, it takes hours. I just wanted to add, you have seen preliminary sterilization of vials. After we put oil into vials they undergo the second and the main sterilization with oil inside.
By the way, I have read lot of times here Pharmacom is just a regular UGL… Probably lot of you think, this is an easy thing, just buy raws, put them into oil, heat up to melt them and done… biiig mistake… I just write here several items and it would be very interesting how brewers you`ve seen here before solve these problems… or don`t solve at all and put all they have as is… Please show me an UGL, which can provide the respective quality. I speak now even not about raws…
I tell you honest, I even did not know about all of these items myself, just had a chance to speak with our main specialist directly a long time and here is in simple words, what I could understand.
1. Does somebody of you know, that any oil on the market has tiny water particles (drops)? If you use oil to cook fried eggs, you don`t care about it. But it matters a lot, if this oil shall be injected into your muscles! I think you all know what can happen if you mix say 1ml of oil and 1 ml of water in one syringe and pin it… Moreover, I am sure no one of cheap brewers know this: oil is not a very good medium for bacteria to reproduce. In other words bacteria don`t reproduce in oil! However they do it very well in water… And now let`s get back to my first sentence in this item: How brewers produce oil dehydration? Only equipment for oil dehydration we use costs $45000. I am sure no one brewer has it! When buying cheap gear in 99,9% cases you get not dehydrated potentially dangerous to health oil!
2. Do you know how and under which circumstance occurs filtration of the final product?!!Syringe filters which lot of brewers use is… shit to put it mildly. Real filter shall be 22 micrometer at least. If you imagine how this works, to sieve oil through such a filter of an average size (to ensure high oil amounts) you would need at least 6 bar pressure. It is just impossible without a special expensive vacuum pump or compressor for pharmaceutical industry + pressure air dryer + a heap of filters, incl. cyclons, etc. Equipment price – 150000$.
3. How other brewers avoid sequences of the double bond (olefinic bond) in ethyl oleate? How they avoid fast oxidation?
Lot of brewers are often proud to manifest they use ethyl oleate in their products. Lot of people think yes, this is cool, oil is not so thick, etc… There is a catch. More EO does not mean better.
This olefinic bond is the treason of so called unsaturated condition of EO. All unsaturated acids are highly inclined to all olefin-typed combination reactions. Most of UGL brewers use vials and regular rubber caps found bought somewhere at Alibaba. Ethyl oleate being a solvent can react with rubber causing its oxidation. What happen with rubber with the time? Try to guess…
How many manufacturers use thermoplastic rubber, which does not have this shortcoming, which is not toxic, hypoallergenic and safe for health? Do they now about it at all? I highly doubt…
4. Lot of brewers can tell you they use benzyl alcohol as antiseptic agent… But do they know, that it is really effective only under observing some important conditions, one of which is STRONGEST control of the total oil PH level? Benzyl alcohol loses its antiseptic efficiency at PH <5 or >7. How home brewers can control it? No way. Yes, it can be you order a cheap vial, which has the manifested dosage of an active agent. Your blood work can show high results, if this is testosterone. But what could happen at long-term storage of such vials? Believe me, you won`t know this. PH Testing + control equipment + 40000$.
5. What preserving agents are other manufacturers using against gram-negative bacteria? Whether they are using them at all?!!!
Benzyl alcohol is very effective against gram-positive bacteria, which cannot be said about gram-negative bacteria, which have a thicker cell membrane and are resistant against lot of preserving agents. I am not allowed to reveal info regarding technologies and compounds we use in our oils, this is one of our production secrets, but we use them, which is already a big advantage against 99% of UGL labs. And our costs here are higher as in any other item of this text.
Non-use in products of parabens, chlorobutanol and some other agents implies only clandestine production and deliberate purpose to sell as many products as possible at as low as possible expenses. Most of the brewers don` even think, that a vial can be used by a person only in 2 or 3 years… I would be afraid to inject such oils.
Observance of all these safety measures (I mentioned by far not all, manufacturing process is more complicated and I am just not allowed to disclose it) results at least +30% in price to each vial.
You can say Pharmacom is pricey… I don`t think so. Finally everyone has a choice and can decide what to use, cheaper gear with health risks or products of a manufacturer proved by 10 years on the market and no one abscess or any other similar problem at all. A vial with 3 grams of high quality sustanon in no way can cost less than 30$ for 1 piece…
I just mentioned some items… In a while most of you will lose your negative prejudice (based on previous brands) against our brand as just a regular UGL… we are not. It will take time, but in a while I will see it…
Video Removed
On this video you can see washing of our vials before manufacturing and preliminary sterilization as well as a part of amps production video.
This video has been done just by a regular employee with a regular camera, not professional filming. So he didn`t showed the entire process, it takes hours. I just wanted to add, you have seen preliminary sterilization of vials. After we put oil into vials they undergo the second and the main sterilization with oil inside.
By the way, I have read lot of times here Pharmacom is just a regular UGL… Probably lot of you think, this is an easy thing, just buy raws, put them into oil, heat up to melt them and done… biiig mistake… I just write here several items and it would be very interesting how brewers you`ve seen here before solve these problems… or don`t solve at all and put all they have as is… Please show me an UGL, which can provide the respective quality. I speak now even not about raws…
I tell you honest, I even did not know about all of these items myself, just had a chance to speak with our main specialist directly a long time and here is in simple words, what I could understand.
1. Does somebody of you know, that any oil on the market has tiny water particles (drops)? If you use oil to cook fried eggs, you don`t care about it. But it matters a lot, if this oil shall be injected into your muscles! I think you all know what can happen if you mix say 1ml of oil and 1 ml of water in one syringe and pin it… Moreover, I am sure no one of cheap brewers know this: oil is not a very good medium for bacteria to reproduce. In other words bacteria don`t reproduce in oil! However they do it very well in water… And now let`s get back to my first sentence in this item: How brewers produce oil dehydration? Only equipment for oil dehydration we use costs $45000. I am sure no one brewer has it! When buying cheap gear in 99,9% cases you get not dehydrated potentially dangerous to health oil!
2. Do you know how and under which circumstance occurs filtration of the final product?!!Syringe filters which lot of brewers use is… shit to put it mildly. Real filter shall be 22 micrometer at least. If you imagine how this works, to sieve oil through such a filter of an average size (to ensure high oil amounts) you would need at least 6 bar pressure. It is just impossible without a special expensive vacuum pump or compressor for pharmaceutical industry + pressure air dryer + a heap of filters, incl. cyclons, etc. Equipment price – 150000$.
3. How other brewers avoid sequences of the double bond (olefinic bond) in ethyl oleate? How they avoid fast oxidation?
Lot of brewers are often proud to manifest they use ethyl oleate in their products. Lot of people think yes, this is cool, oil is not so thick, etc… There is a catch. More EO does not mean better.
This olefinic bond is the treason of so called unsaturated condition of EO. All unsaturated acids are highly inclined to all olefin-typed combination reactions. Most of UGL brewers use vials and regular rubber caps found bought somewhere at Alibaba. Ethyl oleate being a solvent can react with rubber causing its oxidation. What happen with rubber with the time? Try to guess…
How many manufacturers use thermoplastic rubber, which does not have this shortcoming, which is not toxic, hypoallergenic and safe for health? Do they now about it at all? I highly doubt…
4. Lot of brewers can tell you they use benzyl alcohol as antiseptic agent… But do they know, that it is really effective only under observing some important conditions, one of which is STRONGEST control of the total oil PH level? Benzyl alcohol loses its antiseptic efficiency at PH <5 or >7. How home brewers can control it? No way. Yes, it can be you order a cheap vial, which has the manifested dosage of an active agent. Your blood work can show high results, if this is testosterone. But what could happen at long-term storage of such vials? Believe me, you won`t know this. PH Testing + control equipment + 40000$.
5. What preserving agents are other manufacturers using against gram-negative bacteria? Whether they are using them at all?!!!
Benzyl alcohol is very effective against gram-positive bacteria, which cannot be said about gram-negative bacteria, which have a thicker cell membrane and are resistant against lot of preserving agents. I am not allowed to reveal info regarding technologies and compounds we use in our oils, this is one of our production secrets, but we use them, which is already a big advantage against 99% of UGL labs. And our costs here are higher as in any other item of this text.
Non-use in products of parabens, chlorobutanol and some other agents implies only clandestine production and deliberate purpose to sell as many products as possible at as low as possible expenses. Most of the brewers don` even think, that a vial can be used by a person only in 2 or 3 years… I would be afraid to inject such oils.
Observance of all these safety measures (I mentioned by far not all, manufacturing process is more complicated and I am just not allowed to disclose it) results at least +30% in price to each vial.
You can say Pharmacom is pricey… I don`t think so. Finally everyone has a choice and can decide what to use, cheaper gear with health risks or products of a manufacturer proved by 10 years on the market and no one abscess or any other similar problem at all. A vial with 3 grams of high quality sustanon in no way can cost less than 30$ for 1 piece…
I just mentioned some items… In a while most of you will lose your negative prejudice (based on previous brands) against our brand as just a regular UGL… we are not. It will take time, but in a while I will see it…
too long, didnt read. but that video is badass and is like porn. i almost want pharmacom now in my stash
Yea I don't know much about the manufacturing process but that looks significantly nicer than what I'd expect from the average brewer.
Dope song too
Anywhere from 2 minutes to 6874 days.
That's not a question to be answered in the open like this
naturalkon
New Member
Do you know your Tren is some of the weakest I have ever run.
johnnyBALLZ
Well-known Member
DestinedForGreatness
New Member
For anyone who was wondering.
Similar threads
- Sticky
Sponsors
Latest posts
-
-
MESO-Rx Sponsor PCT 24X7 "1 stop shop for all day healthcare"- Latest: PCT24X7 PHARMACY
-
-
-