I've used 2 hose clamps with a turn key, because if it's on too tight the battery doesn't come out easily, a 3/4 in wooden dowel cut in half (the pvc is too flexible and 1 inch is too thick) 2 3/4 pvc male connector and 2 3/4in pvc female connector and tape to hold down the trigger.
Hard to see but the 2 female connectors are held together by a small piece of the wooden dowel on the massage gun. I also just leave that piece on the massager and cut back any of the excess of the hose clamp. I find it doesn't hinder the massager and makes it for an easy connection with the 2 sticks, overall about 15$ to make
I used a rubber mallet to hammer down the connectors on the dowel pieces as the dowel had a slight bigger diameter them the connectors but it made for a really tight fitting connection, if you got one that doesn't fit snug you can probably drill a screw through the side
If you get a 3rd female connector you can make a portable stick for shoulder rotations
shopping list
The IDEAL Turn-Key 2-1/2 - 4-1/2 in. Dryer Vent Clamps (2-Pack) are designed for use in maintenance applications with various hose materials and sizes.Innovative design installs with a simple hand twist,
www.homedepot.com
Find the Cantex Inc 3/4 in. Female Conduit Adapter R5140044, adapter has 2 female ends, 1 which is threaded and the other which is solvent weld at The Home Depot
www.homedepot.com
Add a touch of sophistication to your living room with the selection of this amazing Unbranded Pine Round Dowel.
www.homedepot.com
Find the Dura Plastic Products, Inc. 3/4 in. PVC MIPT x Slip Adapters (10-Pack) CP436-007, compatible with PVC pipe can withstand pressure up to 289 psi from The Home Depot
www.homedepot.com
Perfect for indoor or outdoor use, this 3M ScotchBlue Original Multi-Use Painter's Tape is ideal for painted walls, trim, glass, metal and woodwork.
www.homedepot.com
View attachment 147335
View attachment 147336
View attachment 147337