MESO-Rx Sponsor Primal Pharma - US Domestic

[crispybacon!]

My first order of primal was about a month ago.
Today i was starting my cycle, when i was opening the Deca vials, the whole stopper came out, some of it spilled, i injected my 1ml, and threw away the rest, bathroom smells.
Not the best first experience.

Was this old caps and stoppers or the new ones (black caps)?

 

[CastleSF]

I wouldn’t say good to go but I’m going to give him the benefit of the doubt probably look into filtering my own oils as well. Thanks for asking brother they had to lance it open and drain everything out on antibiotics now. Incant stand surgery but had to do it!

Speedy recovery, bro!

 

[Tore22]

Speedy recovery, bro!

Thank you brother I appreciate that I’ll keep everyone updated on how things are going blessings @CastleSF

 

[CastleSF]

What good is a pic going to do? I can pull a stopper out of a vial and say it happened. This is a scenario where you believe it or you don’t. In general there is a history of caps buried in this thread that don’t come off clean so it’s 100 percent feasible. Someone posted a pic a day or two ago of a cap not coming off like it should. Not trying to be an ass but a pic of this scenario isn’t much help.

It happened to me when I opened a Masteron vial (from WWB? I don't remember now). It forced me to filter it to save the rest of the oil. Just how often does something like this happen?

 

[DeafJam]

So you had to have surgery after pinning this gear, but 3 free vials and you’re good to go?

How’d the surgery go, by the way??

The test C is rolling around at 25% BA from the Jano report. so that should clear up any infection.

 

[Tore22]

It happened to me when I opened a Masteron vial (from WWB? I don't remember now). It forced me to filter it to save the rest of the oil. Just how often does something like this happen?

Brother I’m sorry to hear that and nothing even close to this has ever happened the only issue I’ve ever had with a source and I’ve been using public and private sources for almost 20 years the only thing that has ever happened was some of my oil came out of solution I just boiled a little water on low and placed the vials in and shook them every so often everything was fine never anything like this. I need to do more research into filtering my own oils I’ve never heard much about it so I need to research doesn’t sound like a bad idea

 

[Rbvasques]

Pictures??

None taken, the open vial is in the bathroom’s trash.
I'm not really asking for anything, so no proof was taken, as other said, faking this would be beyond easy anyway.

 

[Dial It In]

The test C is rolling around at 25% BA from the Jano report. so that should clear up any infection.

BA is the last stop to prevent infection. 25 percent doesn’t mean anything. BA doesn’t remove particles.

 

[Dial It In]

Brother I’m sorry to hear that and nothing even close to this has ever happened the only issue I’ve ever had with a source and I’ve been using public and private sources for almost 20 years the only thing that has ever happened was some of my oil came out of solution I just boiled a little water on low and placed the vials in and shook them every so often everything was fine never anything like this. I need to do more research into filtering my own oils I’ve never heard much about it so I need to research doesn’t sound like a bad idea

There is a thread for it. Filtering finished oils quick search you’ll find it brother.

 

[Dial It In]

It happened to me when I opened a Masteron vial (from WWB? I don't remember now). It forced me to filter it to save the rest of the oil. Just how often does something like this happen?

I had it happen once in 20 years. It was a cap that was hard to remove and a stopper that wasn’t seated very well. Maybe I’ve just been lucky.

 

[Tore22]

There is a thread for it. Filtering finished oils quick search you’ll find it brother.

Thank you @Dial It In I will start my research there blessings brother

 

[The Answ3r]

There’s been a lot of talk lately that coring is coming from the older stoppers, so I want to test this myself. For that, I’ll be using 18g, 20g, 22g, and 23g needles.

For context, my entire Primal stash is still completely unopened. I have Test C, Tren E, EQ, Primo E (last batch), Mast E (which I’d rather not sacrifice if possible), Deca, and NPP. I’ll start with an older batch that has the older stoppers and see if any coring shows up depending on needle size. If I notice anything concerning, I’ll report back.

 

[BigDadd7]

There’s been a lot of talk lately that coring is coming from the older stoppers, so I want to test this myself. For that, I’ll be using 18g, 20g, 22g, and 23g needles.

For context, my entire Primal stash is still completely unopened. I have Test C, Tren E, EQ, Mast E (which I’d rather not sacrifice if possible), Deca, and NPP. I’ll start with an older batch that has the older stoppers and see if any coring shows up depending on needle size. If I notice anything concerning, I’ll report back.

I've pinned the shit out of 3-4 bottles of test c with the older stoppers using a 25 and had zero coring. No issues with tren or eq and old stoppers either. I store everything upright, so no solvents on the stoppers beyond whatever happened during shipping.

 

[CastleSF]

There’s been a lot of talk lately that coring is coming from the older stoppers, so I want to test this myself. For that, I’ll be using 18g, 20g, 22g, and 23g needles.

For context, my entire Primal stash is still completely unopened. I have Test C, Tren E, EQ, Primo E (last batch), Mast E (which I’d rather not sacrifice if possible), Deca, and NPP. I’ll start with an older batch that has the older stoppers and see if any coring shows up depending on needle size. If I notice anything concerning, I’ll report back.

It didn't occur to me that the size of needles would make any difference but it actually makes perfect sense. Someone on the forum has advised against using needles larger than 22G in order to keep the stopper in a better shape for multi pins.

 

[The Answ3r]

I've pinned the shit out of 3-4 bottles of test c with the older stoppers using a 25 and had zero coring. No issues with tren or eq and old stoppers either. I store everything upright, so no solvents on the stoppers beyond whatever happened during shipping.

Yeah, I’m with you. I don’t think 25g is an issue at all either, I’ve drawn plenty with 25g and never seen coring myself (not Primal gear). My guess is the guys having problems are using much larger needles. I was mostly just curious and wanted to see it firsthand. Appreciate you sharing your experience.

 

[danny91t]

Yeah, I’m with you. I don’t think 25g is an issue at all either, I’ve drawn plenty with 25g and never seen coring myself (not Primal gear). My guess is the guys having problems are using much larger needles. I was mostly just curious and wanted to see it firsthand. Appreciate you sharing your experience.

no coring issues with 21-23g either in my experience

 

[Trenmademedoit]

There’s a sale and I just got 5 vials on Friday womp womp

 

[Trenmademedoit]

Yeah, I’m with you. I don’t think 25g is an issue at all either, I’ve drawn plenty with 25g and never seen coring myself (not Primal gear). My guess is the guys having problems are using much larger needles. I was mostly just curious and wanted to see it firsthand. Appreciate you sharing your experience.

I’m noticing if I use anything over 22g my topper leaks. I had to draw with 16g to prevent spilling.

 

[datFr3akinRican]

I've used 21g to draw with primals old stoppers as well. No floaters. No issues. I've used tren a, test c and test p 100mg and 200mg all old stoppers no issues.

 

[monster8912]

Im currently using 20g to draw on the old old stoppers, older, and newest stoppers. No issues for me, I used 18 for awhile as well.