MESO-Rx Sponsor Primal Pharma - US Domestic

[k710]

You actually got service through ShopMedVet? The original owner sold early last year, and everything seemed to go to shit. Revival Animal Health is who bought them in February of 2025. Never got my order, but they canceled it quickly enough when I asked. They wouldn't respond to basic questions, but when I asked to cancel, it was damn near immediate. Maybe they turned things back around. Prior to selling, I used them for years, and they were fantastic.

Yeah and it was good service too. One product was on back order till april and I forgot to add a couple alcohol pad boxes so they shipped my first pack, and then send out the substitution with two free boxes of large wipes the following day with fast shipping. Both packs arrived the same day, just from two different couriers lol

 

[anavarstop]

Most common brands like Nipro, BD, and Terumo are luer lock compatible by default. If a needle is not LL, it will usually be clearly labeled as “slip” (or slip-tip).

Things to watch for:
1. It’s not an insulin needle.
2. It’s not a tuberculin syringe with an integrated needle.
3. The product description does not say “slip”

If none of those apply, you’re good. It’ll fit a standard LL syringe just fine.

is there a certain syringe you like to go with, i was filtering and saw great things said about nipro but nobody seems to care about the syringe. Also I was wondering if i could reuse Drawing needles and the syringe I inject with safely? Just recycle the injection needle? I have the money for needles and syringes lol it would just be nice.

 

[hard_gains]

is there a certain syringe you like to go with, i was filtering and saw great things said about nipro but nobody seems to care about the syringe. Also I was wondering if i could reuse Drawing needles and the syringe I inject with safely? Just recycle the injection needle? I have the money for needles and syringes lol it would just be nice.

Fuck no.

 

[k710]

is there a certain syringe you like to go with, i was filtering and saw great things said about nipro but nobody seems to care about the syringe.

Barrels are barrels. I had ordered a case of 1mL AHS and a case of Nipro syringes to compare (one was standard and the nipro were tubercullin measurements) so I wanted to see the difference. AHS was out of stock till April so they replaced with a second case of Nipros and they are great. Markings go up by single units (tubercullin) compared to standard that go up in increments of 2units. So same shit at the end of the day, just more precise dosage control. They are smooth af, but dont have the long rubber nipple on the plunger to minimize dead space in the syringe. With that said, I can barely squeeze a single drop out of the syringe once done even pushing plunger with both hands so I dont really notice a difference.

 

[The Answ3r]

is there a certain syringe you like to go with, i was filtering and saw great things said about nipro but nobody seems to care about the syringe. Also I was wondering if i could reuse Drawing needles and the syringe I inject with safely? Just recycle the injection needle? I have the money for needles and syringes lol it would just be nice.

I use BD 3 ml syringes only, about $30-40 for 200, so basically free.

And no, don’t reuse syringes or needles. Ever. New draw needle, new pin, every time.

Trying to reuse needles to “save money” is junkie behavior. This stuff costs pennies, and infections cost ER visits. Don’t turn a clean cycle into a crackhead science project.

 

[anavarstop]

I use BD 3 ml syringes only, about $30-40 for 200, so basically free.

And no, don’t reuse syringes or needles. Ever. New draw needle, new pin, every time.

Trying to reuse needles to “save money” is junkie behavior. This stuff costs pennies, and infections cost ER visits. Don’t turn a clean cycle into a crackhead science project.

thanks bro!

 

[Matty_G]

I use BD 3 ml syringes only, about $30-40 for 200, so basically free.

And no, don’t reuse syringes or needles. Ever. New draw needle, new pin, every time.

Trying to reuse needles to “save money” is junkie behavior. This stuff costs pennies, and infections cost ER visits. Don’t turn a clean cycle into a crackhead science project.

+1 for the BD 3mL, smooth plunger

 

[Dial It In]

is there a certain syringe you like to go with, i was filtering and saw great things said about nipro but nobody seems to care about the syringe. Also I was wondering if i could reuse Drawing needles and the syringe I inject with safely? Just recycle the injection needle? I have the money for needles and syringes lol it would just be nice.

You the kid that was getting advice from a 19 year old? Just curious

 

[hard_gains]

You the kid that was getting advice from a 19 year old? Just curious

Jesus Christ he is

 

[Dial It In]

Jesus Christ he is

And this is the issue with the forum. These kids have been driven here by social media and this source in particular being all over social media is how things get derailed real quick for them and the forum.

 

[amicedrot]

got my first personal use order from primal, my mom gets her tirzepatide there and no problems so far, but i did order retatrutide but they sent tirzepatide, but im sure theyll sort me out. just pinned 0.63 ml subq of the latest batch of tc250, will report on any effects. generally subq is how i test a batch to see how my sensitive skin reacts. totally unrelated, but does anyone else avoid pinning subq in belly fat when you gotta piss because youre afraid to spring a leak?(im joking.... mostly)

edit: apparently i wasnt paying attention when i ordered and ordered the wrong product. so not on them that i didnt get what i wanted

 

[anavarstop]

You the kid that was getting advice from a 19 year old? Just curious

first off i completely disagreed with him therefor writing an entire paragraph questioning it, I was not trying to make him seem like an idiot but i did mention (he is 19 and knows everything) that should be enough said where i stood. I an also 19 and dont know everything, why else would i ask a question.. im full of them and dont mind listening. im not ignorant and like hearing from everyone.. not sure what the fuck is up with you though, either ignore me or be helpful i could care less if your gonna be a dickhead. everyone ive had conversations with here has been nice enough to help and ive listened.

 

[anavarstop]

And this is the issue with the forum. These kids have been driven here by social media and this source in particular being all over social media is how things get derailed real quick for them and the forum.

another thing.. im here for harm reduction purposes? wtf is the point of this forum? do you want this to be a senior living community and once everyone here dies for this place to not excist? im sure by then another forum will be up and useful but i mean bro wtf is your problem. i really hope you can identify yourself as the problem in this one. if you cant, well...

 

[Dial It In]

first off i completely disagreed with him therefor writing an entire paragraph questioning it, I was not trying to make him seem like an idiot but i did mention (he is 19 and knows everything) that should be enough said where i stood. I an also 19 and dont know everything, why else would i ask a question.. im full of them and dont mind listening. im not ignorant and like hearing from everyone.. not sure what the fuck is up with you though, either ignore me or be helpful i could care less if your gonna be a dickhead. everyone ive had conversations with here has been nice enough to help and ive listened.

I asked a question I wasn’t being a dickhead. I’ve interacted with you one time. But now I’ll go to your intro post and interact a bit. You want advice let’s get some questions going to guide you. I’m always down for that. But so many jump on here and do zero research when there are so many threads that answer questions or you can create your own for help from members. But I’m beginning to accept this is just how it’s going to be. But I’m the dickhead. Don’t be gaslit so easily and take questions so personal.

 

[anavarstop]

I asked a question I wasn’t being a dickhead. I’ve interacted with you one time. But now I’ll go to your intro post and interact a bit. You want advice let’s get some questions going to guide you. I’m always down for that. But so many jump on here and do zero research when there are so many threads that answer questions or you can create your own for help from members. But I’m beginning to accept this is just how it’s going to be. But I’m the dickhead. Don’t be gaslit so easily and take questions so personal.

yea i can definitely see the point of the "informant tiktok kid" that comes in here and either knows everything or asks how long he should run test for and how to lower e2... ive done nothing of that nature, im here for the purpose of this forum.. hard reduction. i apologize for calling you a dickhead.

 

[Dial It In]

yea i can definitely see the point of the "informant tiktok kid" that comes in here and either knows everything or asks how long he should run test for and how to lower e2... ive done nothing of that nature, im here for the purpose of this forum.. hard reduction. i apologize for calling you a dickhead.

No need to apologize. I’m a dickhead sometimes and shit on people too. I often look back and think “that wasn’t cool”. Im old, cranky, got PTSD from five deployments so I can come off dickish. All good though, no worries

 

[hard_gains]

i apologize for calling you a dickhead.

He's a huge dick head. But he turns into a hug marshmallow if you find his ticklish spot right next to his taint.

 

[CastleSF]

I use BD 3 ml syringes only, about $30-40 for 200, so basically free.

And no, don’t reuse syringes or needles. Ever. New draw needle, new pin, every time.

Trying to reuse needles to “save money” is junkie behavior. This stuff costs pennies, and infections cost ER visits. Don’t turn a clean cycle into a crackhead science project.

I was using the 3mL syringes for test injections but found it hard to press the plunger for some reason. Someone here on the forum recommended 1ML syringes instead. The plungers are so much smoother and I can inject relatively quickly without causing PIP.

 

[AlexDavis43]

Also I was wondering if i could reuse Drawing needles and the syringe I inject with safely?

All my TRT nurses have said it's fine to use the same needle to withdraw & inject and then discard, which I did for a long time

Now I re-use the same pin to withdrawal many times, but it's not the same one used for injections

 

[AlexDavis43]

I was using the 3mL syringes for test injections but found it hard to press the plunger for some reason. Someone here on the forum recommended 1ML syringes instead. The plungers are so much smoother and I can inject relatively quickly without causing PIP.

sounds like you're using a high needle gauge (27+?)

goes much more smoothly through a 23 or 21 (it's not a competition about who can use the smallest needle)

I've commented on how I don't think this contributes to scar tissue, which is more likely user error (like most cases of random PIP imo)

Tl;dr: learn the dart injection technique like every nurse in the world does → then a 23g or 21g is not intimidating at all; goes in like butter and easy to depress the plunger

There's a video about dart in the link but there are a million on youtube