Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[bigforyouben]

Can't believe how long I messed around with other methods to decrash until discovering the oven method....

I was inspired by Bayer's patent showing they put their vials in a much hotter pharmaceutical oven for 3 hours to ensure they're fully sterile as a final manufacturing step.

I was going to try your oven method but then I realized my 3d printer works perfectly well as a hot plate, and I got to watch the whole kit of Test C un-crash.

 

[Ghoul]

I was going to try your oven method but then I realized my 3d printer works perfectly well as a hot plate, and I got to watch the whole kit of Test C un-crash.

Anything is better than "boiling water and put a vent pin in it". lol.

 

[heroxyouxhate]

Say hi to this new baby!

Was there a black top and a blue top domestic PT141? I received one in each color but looks like the tests are only for blue tops.

 

[ThePepBrother]

Can't believe how long I messed around with other methods to decrash until discovering the oven method....

I was inspired by Bayer's patent showing they put their vials in a much hotter pharmaceutical oven for 3 hours to ensure they're fully sterile as a final manufacturing step.

It was definitely the perfect method. I had to keep a few vials in a little longer than 15 minutes, but after about 20-25 minutes they all cleared up

 

[HUGE McBIGLARGE]

How soon after sending payment should I ask for tracking?

 

[UncleBuns]

View attachment 306297

View attachment 306298

You've shared a lot of testing with us. Solid dude right here. Thank you sir!

 

[TyLu17]

How soon after sending payment should I ask for tracking?

5 - 7 days

 

[Grey Spartan]

Can't believe how long I messed around with other methods to decrash until discovering the oven method....

I was inspired by Bayer's patent showing they put their vials in a much hotter pharmaceutical oven for 3 hours to ensure they're fully sterile as a final manufacturing step.

In case someone wants to know his "oven" method
170 degrees F (77 degrees C) for 15 minutes.

 

[Dkland]

Can't believe how long I messed around with other methods to decrash until discovering the oven method....

I was inspired by Bayer's patent showing they put their vials in a much hotter pharmaceutical oven for 3 hours to ensure they're fully sterile as a final manufacturing step.

Do you happen to know at what temperature the stoppers or plastic caps would be affected?
Sorry if that’s a stupid or elementary question…
Thank you

 

[Qingdao Sigma Chemicals]

Worst business over here, bad impression not even a fullfilled order in.
dickheads took 8 days to tell me hash is incorrect, all proof that payment was sent to their address and tdix was given from d1 (usdc) still waiting for an appropriate response and assistance. had to ask them again after 3 days that the boss over here suggested i dont bother them, now imagine if i never reasked for an update. in the meantime i coulve already received my stuff from a diff source.
the dude who runs things over here will just yap. "oh if payment was sent then its instantly confirmed no need to ask questions,stop bothering us" yeah sure but ill wait more than a week to tell me that the txid is wrong and u still have yet to refund me for the 2nd payment.

dont do any crypto business w them, their "finance" is a 11 year old behind a screen who plays roblox and is unsure how to check crypto payments. those kids that work for u for free probably have worse conditions than the nike shoes makers scandal.

would love to listen to the boss shittalk instead of offering solutions bcuz it's most likely what he'll do based on his responses.

Well you idiot you could avoid this if you sent correct hash.

Why will you send an incorrect one?

That’s on you

An 11 yo is the one unable to copy and paste a hash without making mistakes

 

[Ghoul]

Do you happen to know at what temperature the stoppers or plastic caps would be affected?
Sorry if that’s a stupid or elementary question…
Thank you

No stupid questions.

Bromobutyl stoppers are fine up to 260f, Chlorobutyl to 270f.

All of the ingredients, oil. BA, BB, and Test C, E, U, and every other AAS raw I'm familiar with are stable at 170-200F for reasonably long periods of times. Certainly up to an hour will have no consequential effect. Nothing will boil or create pressure that could pop the stopper off at those temps either..

 

[181]

First promo gh fast touchdown like old timesss
pre order oils the communication is at times confusing. Tracking in one day, tracking next monday then pre order shipped when ready. Then here i read test e is shipped already to most. I have only ordered test e and bpc ( you could mix those promos).

I have ordered many times honestly always good, but this time communication with assistant is off. This is nothing major but something to improve on communication wise.

What promo for gh showed up quickly? I am still waiting two weeks for any word or tracking on the black November sale. I got my other items I ordered the same day a few days ago but haven’t heard anything on the hgh. Can’t seem to get an answer on WhatsApp. When I did ask they sent me a tracking number to the stuff that already arrived. I’m patient and I know it will show up. I’m just headed out of town and would like to have an idea so o can have someone available to put the package in my house when I’m gone.

 

[JAS1977]

No stupid questions.

Bromobutyl stoppers are fine up to 260f, Chlorobutyl to 270f.

All of the ingredients, oil. BA, BB, and Test C, E, U, and every other AAS raw I'm familiar with are stable at 170-200F for reasonably long periods of times. Certainly up to an hour will have no consequential effect. Nothing will boil or create pressure that could pop the stopper off at those temps either..

@Ghoul , a piggyback question for you. I don't think I've seen this addressed before. I have a kit of Test U that's crashed. It will be a year or so before I get to the point of using it. Should I try to uncrash it now, or is it ok to just leave it crashed until time to start using it? Is there any degradation that occurs from leaving it crashed?

 

[Ghoul]

@Ghoul , a piggyback question for you. I don't think I've seen this addressed before. I have a kit of Test U that's crashed. It will be a year or so before I get to the point of using it. Should I try to uncrash it now, or is it ok to just leave it crashed until time to start using it? Is there any degradation that occurs from leaving it crashed?

The modest amount of heat being applied to get the api back into solution will cause a small amount of "premature aging" to the vial contents and stopper. So because of that I prefer to leave it crashed until just before needed.

 

[nightprowler7]

No stupid questions.

Bromobutyl stoppers are fine up to 260f, Chlorobutyl to 270f.

All of the ingredients, oil. BA, BB, and Test C, E, U, and every other AAS raw I'm familiar with are stable at 170-200F for reasonably long periods of times. Certainly up to an hour will have no consequential effect. Nothing will boil or create pressure that could pop the stopper off at those temps either..

Heating it up does cause pressure, just as it does when you heat crashed vials. And the oil will be cool by the time you reach this step. Many times I’ve uncrashed vials and the pressure shot the plunger from my syringe or caused bulging in the stopper. Honestly man I’m not trying to be a dick but please speak from experience instead of theories. You get ahead of yourself sometimes with the thought you know about things you’ve never done.

 

[Dkland]

No stupid questions.

Bromobutyl stoppers are fine up to 260f, Chlorobutyl to 270f.

All of the ingredients, oil. BA, BB, and Test C, E, U, and every other AAS raw I'm familiar with are stable at 170-200F for reasonably long periods of times. Certainly up to an hour will have no consequential effect. Nothing will boil or create pressure that could pop the stopper off at those temps either..

Thank you!!!

 

[Ghoul]

Heating it up does cause pressure, just as it does when you heat crashed vials. And the oil will be cool by the time you reach this step. Many times I’ve uncrashed vials and the pressure shot the plunger from my syringe or caused bulging in the stopper. Honestly man I’m not trying to be a dick but please speak from experience instead of theories. You get ahead of yourself sometimes with the thought you know about things you’ve never done.

I'm speaking from experience and I specifically said the temps I mentioned won't create enough pressure to pop to stopper out of an AAS Vial, and it won't. They're much more secure, and crimped down with a metal collar. Don't assume because I go into detail I'm speaking theoretically, I just checked the facts before I acted.

I'm asking this question sincerely: How was your syringe involved uncrashing a vial? I could guess, but It's better not to.

 

[Lil_swole87]

Is there a new private bin Tracy? @Qingdao Sigma Chemicals

What's the private bin

 

[Grey Spartan]

Heating it up does cause pressure, just as it does when you heat crashed vials. And the oil will be cool by the time you reach this step. Many times I’ve uncrashed vials and the pressure shot the plunger from my syringe or caused bulging in the stopper. Honestly man I’m not trying to be a dick but please speak from experience instead of theories. You get ahead of yourself sometimes with the thought you know about things you’ve never done.

How do you uncrash a vial? The reason I'm asking is because my kit of primo is crashed and so far the methods I've see listed are the oven, coffee cup heater and boiling water?

 

[Benf15harp]

How do you uncrash a vial? The reason I'm asking is because my kit of primo is crashed and so far the methods I've see listed are the oven, coffee cup heater and boiling water?

Try using the vial as a butt plug while you sleep.
Learned this one from @Trenbolonetax
Havent tried it but he knows his butt stuff lol