Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Bronzino]

Hi guys, I posted few days ago a picture about hgh 36UI from QSC that have purple cap instead the black one like test picture. Doing a research, it seems to be an old batch (but it’s very strange because hgh 36UI wasn’t in EU warehouse since November and post here about it are dates January), but I would understand something from skilled guys that are here: in the left, Optitropin 12UI with gray cap, the purple one is the QSC 36UI HGH.
How could be that they have same level? 3UI should be roughly 1mg then in the left we have 4mg and in the right 12mg….how could be possible?

 

[SmallTitsIRL]

Hi guys, I posted few days ago a picture about hgh 36UI from QSC that have purple cap instead the black one like test picture. Doing a research, it seems to be an old batch (but it’s very strange because hgh 36UI wasn’t in EU warehouse since November and post here about it are dates January), but I would understand something from skilled guys that are here: in the left, Optitropin 12UI with gray cap, the purple one is the QSC 36UI HGH.
How could be that they have same level? 3UI should be roughly 1mg then in the left we have 4mg and in the right 12mg….how could be possible?

Because the amount of powder of GH there is too little. So they put fillers to bump up volume. Same thing has been discussed in the past for GLPs. 4mg or 12mg is very little you probably couldn't see it with the naked eye.

 

[nullandvoid]

I'm pretty sure you can't really go based on visuals for comparing amounts. The actual amount of the compound is very little compared to the fillers and whatever else is used to make the puck.

Edit: Jinx.

 

[Flankstake]

Hi guys, I posted few days ago a picture about hgh 36UI from QSC that have purple cap instead the black one like test picture. Doing a research, it seems to be an old batch (but it’s very strange because hgh 36UI wasn’t in EU warehouse since November and post here about it are dates January), but I would understand something from skilled guys that are here: in the left, Optitropin 12UI with gray cap, the purple one is the QSC 36UI HGH.
How could be that they have same level? 3UI should be roughly 1mg then in the left we have 4mg and in the right 12mg….how could be possible?

Cap color isn’t a batch number, they use whatever caps they have available.

Size of the cake correlates with dosage, but concentration can vary. A lot of people participated in the group by so it’s likely someone will send them out for analysis.

 

[Bronzino]

Because the amount of powder of GH there is too little. So they put fillers to bump up volume. Same thing has been discussed in the past for GLPs. 4mg or 12mg is very little you probably couldn't see it with the naked eye.

It make sense, thanks for your help

 

[Bronzino]

Thanks guys

 

[Jpxxx]

You sound 18 and from England knickers you probably typed that with a zyn in your mouth and sipping tea

No clue what u babbling so I cant be 18 lmao

 

[ackmack78]

Hi guys, I posted few days ago a picture about hgh 36UI from QSC that have purple cap instead the black one like test picture. Doing a research, it seems to be an old batch (but it’s very strange because hgh 36UI wasn’t in EU warehouse since November and post here about it are dates January), but I would understand something from skilled guys that are here: in the left, Optitropin 12UI with gray cap, the purple one is the QSC 36UI HGH.
How could be that they have same level? 3UI should be roughly 1mg then in the left we have 4mg and in the right 12mg….how could be possible?

If you had done your research you would have known you would be getting purple caps. It's been mentioned in this thread multiple times in the last week alone.

 

[alie]

I sent a ton of money to tracyfromqscc and got scammed.
That telegram was definitely posted and I guess deleted while i was searching for the telegram in the last few pages
Lost over $500

 

[alie]

People want instant gratification, they cant waste their time reading and stuff. Its been posted a million times throughout this thread.

I’m not sure why we just won’t answer them, I went on a search and ended up send the money to “tracyfromqscc” and got scammed. Why not just either post it on the first thread or just tell people when they ask

 

[Psy-chonaut]

I’m not sure why we just won’t answer them, I went on a search and ended up send the money to “tracyfromqscc” and got scammed. Why not just either post it on the first thread or just tell people when they ask

FFS don't believe any of us in here as well - verify everything twice!
We could be scamming you, that's why I hate to give out info....!

 

[pheno609]

QSC TG Channel

QSC announcement Channel

t.me

 

[alie]

FFS don't believe any of us in here as well - verify everything twice!
We could be scamming you, that's why I hate to give out info....!

Yea it’s my fault. I’ve never used telegram before and when I went to search for the user name, her pic popped up and the little blue check I figured it was legit. I feel stupid

 

[ineffectual]

I’m not sure why we just won’t answer them, I went on a search and ended up send the money to “tracyfromqscc” and got scammed. Why not just either post it on the first thread or just tell people when they ask

tracyfromqsc

 

[pheno609]

This is from their tg channel, join it to confirm. Always verify everything from their thread

 

[alie]

This is from their tg channel, join it to confirm. Always verify everything from their thread

Thank you for the info, I just didn’t really understand telegram
The positive in this is that thankfully I can afford and I hope I prevent someone else from being scammed that can’t

 

[pheno609]

Yea it’s my fault. I’ve never used telegram before and when I went to search for the user name, her pic popped up and the little blue check I figured it was legit. I feel stupid

It happens more often than you think. I dont know how the scammers do it, but they some how get their profiles to show up first on the list even though their tag is different from the exact tag you searched for. Happens alot with HYB, the wrong profile appears first on the list and they scam alot of people. Always double check the tag

 

[thebiggestmofo]

Panda told me he would have started making his own raws... (and still never did it) Tracy told me people dont wanna risk their freedom so it seems there will be just stupid fuckin peptides and hgh...

No one knows about raws being produced again.. i wish there was another QSC from another nation

 

[trytryagain]

Because the amount of powder of GH there is too little. So they put fillers to bump up volume. Same thing has been discussed in the past for GLPs. 4mg or 12mg is very little you probably couldn't see it with the naked eye.

The bulk of the powder (“cake” or “puck”) isn’t “filler”. If done right the bulk of the cake is a combination of substances used to do one or more of the following: facilitate the freeze drying of the API/drug; stabilize the API/drug from degradation; enhance solubility in injection solution; encourage less reaction during/after injection; provide a visual indicator of low water content/proper freeze drying; etc.

And basically the vast majority of the cake you see there is void (from the freeze drying out removing all the ice that was there and being replaced with vacuum and continuing to be vacuum if properly sealed). Beyond that the vast majority of the solid matrix/mass occupying the same region as the void is the excipients above, very little is the API drug itself.

Same applies to weight…can’t compare the weight. Only way to know is via testing.

Perhaps the only useful visual comparisons of amounts one might be able to do is when comparing vials from the same batch (same solution into the vials, same lyophilizer run) and even then, it’s not very reliable. If you known they are from the same run and the substances inside are intact cakes (not fucked up by handling) that lyophilized correctly (there’s a pdf out there showing visually all the different ways it can fail) and at that point the cake sizes are different…then you know the automated filler(s) were not adjusted properly and you have significant variations of API/drug. Mostly that’s only useful for the producers/sellers to know since everything can be shuffled around before a kit is put together.

Anyway, generally not “fillers”.

 

[TheMoto]

The bulk of the powder (“cake” or “puck”) isn’t “filler”. If done right the bulk of the cake is a combination of substances used to do one or more of the following: facilitate the freeze drying of the API/drug; stabilize the API/drug from degradation; enhance solubility in injection solution; encourage less reaction during/after injection; provide a visual indicator of low water content/proper freeze drying; etc.

And basically the vast majority of the cake you see there is void (from the freeze drying out removing all the ice that was there and being replaced with vacuum and continuing to be vacuum if properly sealed). Beyond that the vast majority of the solid matrix/mass occupying the same region as the void is the excipients above, very little is the API drug itself.

Same applies to weight…can’t compare the weight. Only way to know is via testing.

Perhaps the only useful visual comparisons of amounts one might be able to do is when comparing vials from the same batch (same solution into the vials, same lyophilizer run) and even then, it’s not very reliable. If you known they are from the same run and the substances inside are intact cakes (not fucked to by handling) that lyophilized correctly (there’s a pdf out there showing visually all the different ways it can fail) and at that point the cake sizes are different…then you know the automated filler(s) were not adjusted properly and you have significant variations of API/drug. Mostly that’s only useful for the producers/sellers to know since everything can be shuffled around before a kit is put together.

Anyway, generally not “fillers”.

thanks