Recipe List

[Slammich]

Went through a few places where i could find some recipes and compiled them. Feel free to add your own, so long as they are crash tested. I think it would make it easier for people like me new to brewing to find if they are all in one place.


Notes:


BENZYL ALCOHOL, BENZYL BENZOATE: MAXIMUM CONCENTRATION:

The way I see it is if you need 20% BB or more you need to just think about lowering your dosage. Between both the BB and BA it shouldn't be over 20%. This is a fact. Says so right there on the Internets.
I use 1%. Most people probably use 2%. Anything more than 2% is just silly, IMO. (BA)
I actually use 19/1Credit: XKawn


Equipose:

As for the BB there is no reason in the world to use it for EQ unless you’re using GSO or some other thick oil and you want to thin it out.
Oh, and I don’t use BB for Test E or EQ. Both products I brew at 330mg/ml. That is my 300mg plus my standard 10% over.
Credit: XKawn


Test C:

25g powder

59.75ml oil

1ml BA

18ml BB Credit: XKawn



Test Cyp 200mL @250mg/mL
Oil:102.04mL
Powder: 50grams
BA: 1.5%- 3mL
BB: 12%- 24mL
EO:20%- 25.51mL Credit: BuryMeBig



Test E:

TESTOSTERONE ENANTHATE, BENZYL BENZOATE, RECIPE:

Oh, and I don’t use BB for Test E or EQ. Both products I brew at 330mg/ml. That is my 300mg plus my standard 10% over.

At 250mg/ml it's not necessary. Above that you will start needing it. At about 350mg/ml you'll start needing the standard 18 to 20.

BA is very necessary. It's what keeps your product sterile. The BB is to keep your product from crashing. At 250mg per ml your Test E should hold on its own hence the BB not really necessary with this recipe.


Test E 300mg/ml

1% BA

10% BB Credit: XKawn


Test E 400mg/ml

2% BA

20% BB

All oils are in safflower oil. No EO. No guaiacol. Credit: Leancuisine


Test E 300
15%BB
1%BA Credit: Vegeta


Test E 250

1.4%BA
13%BB
Cottonseed Oil
Credit: Vegeta


Test E 250mg

1.5%

7.8%

CSO

Credit: Lukesky152


Test E 200mL @250mg/mL
Oil:102.04mL
Powder: 50grams
BA: 1.5%- 3mL
BB: 12%- 24mL
EO:20%- 25.51mL Credit: BuryMeBig



DHB:

200mg/ml
2 grams DHB
.6ml BA (6%)
2.4ml BB (24%)
5.3ml safflower oil Credit: Leancuisine




Mast E:

250mg/ml

2% BA

18% BB

All oils are in safflower oil. No EO. No guaiacol. Credit: Leancuisine


Tren Ace:

100mg

2%

20%

CSO Credit: Lukesky152



Tren Ace @100mg only needs 1.5% BA, 12% BB with CSO Credit: BuryMeBig



Test Prop:

100mL@100mg/mL
Oil: MCT-77.4mL
Test P: 10grams
BA

1.5%)-1.5mL
BB

12%)-12mL Credit: BuryMeBig



200mL @ 200mg/mL
Oil: 86.18mL
Powder: 40grams
BA:1.5%- 3mL
BB:16%- 32mL
EO:30%- 38.6mL
Guaiacol:3%- 3.85mL Credit: BuryMeBig




Mast Prop:

100mL @100mg/ml

(Also for Test P, Test Ace, Test PP, Tren Ace, NPP)
Oil: 61.72mL
Powder:10grams
BA:1.5%- 1.5mL
BB:12%- 12mL
EO:20%- 15.4mL Credit: BuryMeBig


100mL@150mg/mL
Oil:MCT-77.48

Powder: 15grams
BA@

1.5%)-1.5mL
BB

@14%)-14mL Credit: BuryMeBig

 

[XKawN]

I believe I've said before that you don't (technically) need bb for test e at 250mg/ml. It will hold. I brew at 300mg/ml and use 10%. But even if it's not needed to hold i would still add atleast 10% to thin it out some. Like with eq. Eq Is thick stuff. I'll add 10% to eq300 to thin it out for sure.

 

[tandd6]

Mast E?
I'm getting 25g powder, using either Saf or MCT
Thanks

 

[wantsomemore]

anyone ever do a blend with NPP and MAST P?

Going to do 100 mg/ml each. I figure 2% BA amd 18% BB will hold well..

 

[Slammich]

Mast E?
I'm getting 25g powder, using either Saf or MCT
Thanks

Mast e is in the compiled list

 

[Slammich]

anyone ever do a blend with NPP and MAST P?

Going to do 100 mg/ml each. I figure 2% BA amd 18% BB will hold well..

If you do and it holds please add to the list. I'd love to know about blends that hold well

 

[tandd6]

Mast e is in the compiled list

Yea I know it just doesn' say how many grams.

 

[Slammich]

Yea I know it just doesn' say how many grams.

Use the steroid calculator and that will give you all you need with the percentages listed and concentration bro.

 

[RandallNowan]

I believe I've said before that you don't (technically) need bb for test e at 250mg/ml. It will hold. I brew at 300mg/ml and use 10%. But even if it's not needed to hold i would still add atleast 10% to thin it out some. Like with eq. Eq Is thick stuff. I'll add 10% to eq300 to thin it out for sure.

I am wanting to do blend with TCyp and EQ at 350mg/ml apiece. Would accept 333, lol.
Do you think this is feasible?

Was thinking 50/50 EO and GSO for the oil, and about 15% BB? What do you reckon?

I am prepared to tinker a bit... But I deffo want to make the strongest 1:1 Cyp/EQ blend I can.

I am very interested in your thoughts. Randall

 

[XKawN]

I am wanting to do blend with TCyp and EQ at 350mg/ml apiece. Would accept 333, lol.
Do you think this is feasible?

Was thinking 50/50 EO and GSO for the oil, and about 15% BB? What do you reckon?

I am prepared to tinker a bit... But I deffo want to make the strongest 1:1 Cyp/EQ blend I can.

I am very interested in your thoughts. Randall

No sir. Not a piece. I doubt you'd get test cyp to hold by it's self at 350mg per ml with normal bb percentages and or not using a stronger solvent like guiac. You can add a total of more hormone if you use multiple hormones or esters, but that would be a total not an individual. What i mean is this, and this is just an example. If i could only get test e to hold at 300mg per ml and i could only get eq to hold at 300 mg per ml i most likely could get both together to hold at 400mg per ml (200mg per ml each). But do you see how i had to reduce the individual hormone to get a higher total? So most likely you would only be able to get those products to hold together at 200mg each or less. I have yet to try those 2 together, but that's gonna be pretty close to it.

 

[Slammich]

I am wanting to do blend with TCyp and EQ at 350mg/ml apiece. Would accept 333, lol.
Do you think this is feasible?

Was thinking 50/50 EO and GSO for the oil, and about 15% BB? What do you reckon?

I am prepared to tinker a bit... But I deffo want to make the strongest 1:1 Cyp/EQ blend I can.

I am very interested in your thoughts. Randall

Check out the feedback regarding test cyp vs. Test e. Most experienced brewers won't touch cyp. But, to each their own.

By all means, if you get a blend to hold, please update us.

 

[RandallNowan]

I was 'thinking' that the EQ being oily itself might help... As the EQ wouldn't need any oil added, per se.

I think I will have a go - then come back conceding you boys were correct and having had to dilute the shit out of it!

 

[RandallNowan]

If I can get it to hold initially at a high ish temperature, then I reckon it might keep holding when I add the EQ. I've almost got a plan. I'll report back regardless of results.

Still awaiting raws. Hopefully v soon now.

 

[Samael]

Blend(stack) of:
Testosterone propionate 125mg/ml
NPP 125/ml

Mct oil
Ba-bb ratio: 2/20

Tested, holds like a charm.

 

[Slammich]

Blend(stack) of:
Testosterone propionate 125mg/ml
NPP 125/ml

Mct oil
Ba-bb ratio: 2/20

Tested, holds like a charm.

I will be trying this for sure. Thanks bro! My next run was going to be an npp and test prop cycle. I was thinking of adding EQ as I hear it increases appetite.

 

[XmadXscientist]

If I can get it to hold initially at a high ish temperature, then I reckon it might keep holding when I add the EQ. I've almost got a plan. I'll report back regardless of results.

Still awaiting raws. Hopefully v soon now.

I always have a plan when I’m doing non conventional blends like say bases. Typically it goes to shit shortly after undertaking the project, or after sitting for a couple days and crashing.

I just made eq at 400mg/ml no problem and could probably push it to 5-600mg/ml. I would make them separate as Test Cyp doesn’t play nice.

 

[Sk8man101]

My 250 test e held fine.
Bread and butter recipe.

250mg/ml
GSO
2% ba
18% bb


Next time I'll only use 1% ba. I have a strong suspicion that some of these labs that have reputable bad pip is caused by overdosing their raws combined with 3% ba.

 

[Samael]

I will be trying this for sure. Thanks bro! My next run was going to be an npp and test prop cycle. I was thinking of adding EQ as I hear it increases appetite.

You are welcome mate,
And btw its almost pipless at 1ml, pinned quad 2 days ago, i just feel it slightly, nothing bad.
Id like to try as well blend of tren acetate and masteron each 100mg/ml. Ever tried that one?

 

[Slammich]

You are welcome mate,
And btw its almost pipless at 1ml, pinned quad 2 days ago, i just feel it slightly, nothing bad.
Id like to try as well blend of tren acetate and masteron each 100mg/ml. Ever tried that one?

Never brewed yet. Just finishing up ordering all my equipment today. My raws order will go in once I get my stuff set up. I'm running tren ace and mast prop now with a little test prop so it will be awhile before I do a tren blend as I am looking forward to a break. This run has got me so lethargic in the afternoon and evenings....but also fucking like I'm 17 again.

I'll be ordering everything domestic that is available from the popular source here at Meso so I will have lots to play around with. If I try it before you I will for sure post up.

 

[Slammich]

My 250 test e held fine.
Bread and butter recipe.

250mg/ml
GSO
2% ba
18% bb


Next time I'll only use 1% ba. I have a strong suspicion that some of these labs that have reputable bad pip is caused by overdosing their raws combined with 3% ba.

I keep reading BB isn't needed for test E. Thoughts?