[SOURCE] Olympia Labs

[bolder]

All really good points. I do keep the brewing rooms clean. We do delete all emails once the client receives their product. We would ask the client for their batch # if we need it.

I do sell to one bulk buyer who sells locally. I guess I don't have a way to confirm that other than share the payment transactions from them which I can't do.

You make a good point. Maybe it's best I close shop here and only sell to the private buyer till I get the equipment I've ordered along with the large batch of raws, and create the setup that the board prefers (autoclave, larger capping machine, mortar + pestle, batch # on the vials themselves). Not requested but the new setup will also use a peristaltic pump and capsule filters.

Thanks again everybody who gave constructive feedback and asked questions. I will post pics of the new setup once it is in with an updated stock list.

Not being a dick but if you had done some research then you would have known what we expect here.
These are all comments and statements that are to encourage a source to strive to do better.
Even though it seems as we’re trying to run sources off that’s not what is intended. But it does help weed out some of the sources that’s not up to the task.
If you do plan on making a return just get your shit lined out and come back prepared.
Good luck!

 

[BigBaldBeardGuy]

Use this time to have your product tested. You should really send in your own samples from each batch. It shows us that you care about the product you put out and it helps you to know you have confidence in sending out good product. Most labs don’t do this.

That’s why I was asking about batch numbers. You should be able to match your test results to each batch and then when a member sends in their own sample the results should all correlate. That builds trust more than anything else. If you TELL me your sample tested 248 mg and my sample results come back 246 mg then everything checks and everyone is happy with the product.

 

[MisterSuperGod]

The need for likes here is rampant if you haven’t already found out. Some of the people you’re being “vetted” by are 180lbs so take it for what it’s worth. They suck TGI’s dick but forget how awful his stock was.

What does it matter if they're beginners or Mr. Olympia?
Members want quality sources that aren't going to sell them bunk or dirty gear. It's funny, i see you bitch, moan and whine, but never offer solutions to change the thing's you're bitching about.

 

[MikeIronTyson]

Speaking of taints, has anyone else noticed the popularity/discussion of licking buttholes increase over the past few years?

 

[T-Bagger]

Speaking of taints, has anyone else noticed the popularity/discussion of licking buttholes increase over the past few years?

I’ve been doing it since 1990 but yeah, it’s definitely gained popularity as well as the butthole over all.

 

[T-Bagger]

What does it matter if they're beginners or Mr. Olympia?
Members want quality sources that aren't going to sell them bunk or dirty gear. It's funny, i see you bitch, moan and whine, but never offer solutions to change the thing's you're bitching about.

Easy to talk trash while offering nothing helpful, especially about a good source who continually improves

 

[mp46]

Not bowing out, upgrading and returning. If the board wants my glassware sterilized with a specific lab equipment, or my raws capped with a larger capper, etc, there’s no point in me selling product not created that specific way, regardless of what I think. I’ll put the customer first like I said.

No one cares what you sterilize your glassware with, as long as it's done properly and actually sterilized, you chose dry heat, that's not a problem unless the oven you're using isn't meant to sterilize. Another source chose wet heat but they chose to do it with a pressure cooker and not something designed to actually sterilize. Whether it's dry or wet doesn't matter, it's whether the equipment is rated for sterilization.

No one cares what cap machine you use. What they do care about is capping the correct dose. Whether you do that 1 at a time of 500 at a time doesn't matter. The concern about the size of your machine stems from you being able to keep up with demand, if you're positive you can keep up with a 100 cap machine then be confident in that and say so.

In both cases you listed the root problem isn't the equipment, its the process and procedure.

 

[The ole man]

The need for likes here is rampant if you haven’t already found out. Some of the people you’re being “vetted” by are 180lbs so take it for what it’s worth. They suck TGI’s dick but forget how awful his stock was.

Guess you ain’t on the list lol

Temper. Temper. If you start lashing out, we’ll burn this thread down. The good labs stay cool and calm. The shitty labs tend to be the ones that get defensive. Take deep breaths and calmly reply. Educate if you need to but don’t get a tone or insult anyone.

Part of the process of asking a million questions is to see how you handle it. If you get flustered over questions then how are you going to react if there’s a legitimate problem down the line. Mistakes happen, it’s how you handle them that makes a difference.

“What we got here.. is... failure to communicate”

From everything up to this point all that I have seen is that @Olympia Labs is a home brewer.
He has not yet acquired all the equipment needed to be considered anything other than a home brewer.

Although his home brew methods may work there’s still risks with his setup imo.
Without having the proper items and a clean room throughout the process then I don’t consider this lab to be up to standards from what I’ve seen so far.

Just for starters MAYBE when a clean room is confirmed and an autoclave is in the process I might consider @Olympia Labs to be more serious about his endeavor here.
All that’s missing is a box fan held up by anal beads in a weed tent...

Another thing about the batch numbers... I’d prefer my vials to have that batch number on it! If you send a batch number by email then for you to keep track of what batch a customer has you would have to keep emails! That’s a big No No!

Obviously this “lab” didn’t think things through to the fullest extent and needs a lot of work if he wants to complete with other sources here.
He has nothing more to offer members and what he’s currently offering is under the standards of the existing sources on this board!

As far as you filling bulk orders to one customer I just call bullshit!
This is your first attempt and your experience, or lack of, is showing!

All that’s missing is a box fan held up by anal beads in a weed tent...

Where have I heard this before??? Lol

 

[The ole man]

It’s been awhile since I went on a new source thread.
Last one had a weed tent, box fan and dirty glassware.
What ever happened to him lol?
Wasn’t it venom?

 

[MikeIronTyson]

It’s been awhile since I went on a new source thread.
Last one had a weed tent, box fan and dirty glassware.
What ever happened to him lol?
Wasn’t it venom?

He died a slow and painful death, I hope.

 

[T-Bagger]

Guess you ain’t on the list lol

Bingo

 

[T-Bagger]

He died a slow and painful death, I hope.

Lol, you and me both

 

[The ole man]

Lol, you and me both

I figured he might come back as the new reinvented Canadian Bacon with a bigger weed tent, 2 box fans, and transvestite helper.

 

[MisterSuperGod]

All really good points. I do keep the brewing rooms clean. We do delete all emails once the client receives their product. We would ask the client for their batch # if we need it.

I do sell to one bulk buyer who sells locally. I guess I don't have a way to confirm that other than share the payment transactions from them which I can't do.

You make a good point. Maybe it's best I close shop here and only sell to the private buyer till I get the equipment I've ordered along with the large batch of raws, and create the setup that the board prefers (autoclave, larger capping machine, mortar + pestle, batch # on the vials themselves). Not requested but the new setup will also use a peristaltic pump and capsule filters.

Thanks again everybody who gave constructive feedback and asked questions. I will post pics of the new setup once it is in with an updated stock list.

If you actually keep your word and don't just keep popping in without any real changes in the hopes of snagging a few noob orders, what you're doing is commendable.

With all your ducks in a row, you could make a pretty decent living for yourself here. Best of luck and i'm looking forward to seeing what you can bring to the table when fully prepared.

 

[desertwarrior]

I’ve never felt great about labs who claim to source locally. Any layers of security that can be taken over the internet are non existent when making in person sales. Busts I’ve read about generally start one of two ways. An interception of raws at customs or dimes getting dropped from someone local to the source (shipper, receiver, customers).

 

[LeoTC]

Guess you ain’t on the list lol




All that’s missing is a box fan held up by anal beads in a weed tent...

Where have I heard this before??? Lol

In all fairness, anal beads ARE pretty sturdy. Can't have that string snapping and losing one in there.

 

[Glocker]

Speaking of taints, has anyone else noticed the popularity/discussion of licking buttholes increase over the past few years?

Not me sir i have stated in another thread i am not into the ass eating either online or off. In fact in my pocket I carry those sandpaper condoms and no vaseline anywhere to be found that's how i roll.

 

[Glocker]

[/QUOTE]

Finally some important stuff! Here you go:

the correct definiton to "taint" is the spot between the vagina and the asshole. That is what taint is. Gooch is the spot between the nut sac and the asshole. -Source: urban dictionary.

Well if it came from Urban then its as good as coming from Jano. We;re all in a better place now knowing this.

 

[Glocker]

To be honest my biggest concern with a "start-up" like yourself is security. I just did business with a start-up elsewhere. I didn't use crypto for my donation and after two different donation attempts using two different methods the donation ended up back in my lap both times. From my perspective red flags have been raised and i have reason to believe names have been added to a list somewhere, that was two failed transactions where human eyes stepped in on receiver end and said - we cant do this. This was completely avoidable on both donations. Product was received within a few days donation was sent so all is good on that end. OP does business local and doesn't have the online experience so his op-sec is my biggest concern here and that is something only time can fix. But posting some nice titty pics of his girlfriend sister and cousins every once in a while will go a long way towards building our trust.

 

[Glocker]

All good things but please come back with a perky upbeat can-do attitude too!

Good point right now i can't get a read on his long term demeanor and stability. Seems like he wants to do well but needs to lift his chin and do it not just pee himself.