MESO-Rx

Anabolic Steroids

sp5der - QUALITY US DOMESTIC

Highlights Only
Turkeybuilder said:
This dicksucking of the vendor to the point of wanting to pay more per vial is insane and some of you should get your emotional thinking in check. Let’s be logical.

There’s no reason to be pushing for a vendor to increase their prices. If you feel so happy about a vendor because they provide quality product and accurate dosing, measurement, high quality equipment, etc, why not make a purchase with the vendor and then leave a tip if you’re so inclined? You want to spend more money? Let the vendor know you sent 50-100$ extra because you appreciate them. Don’t force higher pricing onto the rest of us.

Spyder himself wanted to start out his shop with an advantage and he did so by providing the best possible equipment, at the best possible prices. That’s what makes him “stand out”. There are multiple other vendors using the same exact equipment and same exact accurate dosing as this vendor and I don’t see any of you in those threads saying “raise your prices”.

Leave your high horses at home and if you want to monetarily reward this vendor for his excellent product then do by providing the vendor a “tip” with your next order. No need for the rest of this nonsense.
Click to expand...
I don't need to buy this guy's stuff. I have brewed well over 5k vials in the past 2 years.

I also wouldn't be that surprised if I syringe filter 5x the speed of people here.

I am being realistic for the risk he is taking.
 
sp5der said:
This is what I don’t get. How 4-6 at the same time unless u have 12 hands
Click to expand...

If you apply too much pressure with 100% liquid, it will not maintain "consistent controlled pressure". It will be very tough on the filter.

Now....
Compression of gas+liquid in the chamber(air). 10-15ml air in the syringe. It will apply lighter consistent pressure over time. It will create a "drip". Kind of like you may see on actual caulking.

So you slowly keep pumping all the caulking guns with reasonable pressure and watch to make sure the liquid doesn't hit the vent needle. If it hits the vent needle, the pressure will pop the rubber stopper off and you compromised sterility.

The caulk gun can lay on its side cause I there is IV tubing.


In cases like mine, I just lost 2 dollars for the presterile ALK vial
 
Rido said:
If you apply too much pressure with 100% liquid, it will not maintain "consistent controlled pressure". It will be very tough on the filter.

Now....
Compression of gas+liquid in the chamber(air). 10-15ml air in the syringe. It will apply lighter consistent pressure over time. It will create a "drip". Kind of like you may see on actual caulking.

So you slowly keep pumping all the caulking guns with reasonable pressure and watch to make sure the liquid doesn't hit the vent needle. If it hits the vent needle, the pressure will pop the rubber stopper off and you compromised sterility.

The caulk gun can lay on its side cause I there is IV tubing.


In cases like mine, I just lost 2 dollars for the presterile ALK vial
Click to expand...
I’m aware it needs air in syringe

I think I understand now

So you’re saying the syringes never push back? You understand what I mean? Maybe it’s different with 60ml with 15ml air and it holds it in place until it’s done filtering through. But with 10ml and 1mL air you have to hold it down, or syringe will push back on you.
 
sp5der said:
I’m aware it needs air in syringe

I think I understand now

So you’re saying the syringes never push back? You understand what I mean? Maybe it’s different with 60ml with 15ml air and it holds it in place until it’s done filtering through. But with 10ml and 1mL air you have to hold it down, or syringe will push back on you.
Click to expand...

It can't push back a caulk gun.
But you can't use a 10ml syringe.
You could get a glue gun that works the same but im not sure if its even worth it for 10ml.

Most IV tubing uses PVC -- not compatible with oil/ba/bb.
This is on the last page.
You'd have to find non PVC tubing if you plan to do this.
1766294104158.webp


Right now i use a labstand to prop my 60ml caulk gun vertically with the vial directly below it. You could get a few of these and just keep swapping the vials.
1766294443201.webp
 
Last edited:
Photon said:
It can't push back a caulk gun.
But you can't use a 10ml syringe.
You could get a glue gun that works the same but im not sure if its even worth it for 10ml.

Most IV tubing uses PVC -- not compatible with oil/ba/bb.
This is on the last page.
You'd have to find non PVC tubing if you plan to do this.
View attachment 368911

Click to expand...
Oh yeah , didn’t even think about the syringe not being able to push back on caulk gun

It makes sense now.

I’m aware PVC not compatible. Thank you for taking time to link source though.
 
Photon said:
It can't push back a caulk gun.
But you can't use a 10ml syringe.
You could get a glue gun that works the same but im not sure if its even worth it for 10ml.

Most IV tubing uses PVC -- not compatible with oil/ba/bb.
This is on the last page.
You'd have to find non PVC tubing if you plan to do this.
View attachment 368911


Right now i use a labstand to prop my 60ml caulk gun vertically with the vial directly below it. You could get a few of these and just keep swapping the vials.
View attachment 368913
Click to expand...
60ml syringe monoject rigid

Workforce caulk gun from Amazon

Standard bore Braun IV tubing extension


GG
 
Rido said:
60ml syringe monoject rigid

Workforce caulk gun from Amazon

Standard bore Braun IV tubing extension


GG
Click to expand...

I use a lab-stand as i couldn't find non-PVC iv tubing.
i just leave the caulk gun permanently attached to the labstand.

For syringe i use solvent resistant syringes.
No rubber and no silicone oil (lube used for rubber)
www.air-tite-shop.com

Air-Tite Products Co., Inc. - Air-Tite Premium Lab/Vet 2-Part Luer Lock Syringes

Air-Tite Premium Lab/Vet 2-Part Luer Lock Syringes
www.air-tite-shop.com www.air-tite-shop.com

I use a wide mouth caulk gun from Amazon - don't remember which i bought but it fits the syringe nicely lol. I just bought a whole bunch and returned the ones that dont fit.

I did buy a whole bunch of IV tubing but didn't use it for filtering.
It's convenient when you're trying to inject into the DG lol

Chronic Low ferritin. Need advice from those who have fixed low ferritin.

Yeah I dropped the reta last week. Lowering HRT & going to take 72mg iron empty stomach every morning. Get ferritin test in 2-3 weeks See if any improvement. My guess is, these prolonged cruise level. Just tanked my ferritin and it’s never been able to prooperly recover. I go thru cycles of...
www.thinksteroids.com www.thinksteroids.com
 

Attachments

  • 1766300871747.webp
    1766300871747.webp
    64.6 KB · Views: 8
Last edited:
crispybacon! said:
I’m completely relaxed. Just pointing out the obvious reason what you were suggesting wouldn’t make much sense.

As for the GH comparison, it doesn’t translate, as the vast majority is simply resold, with the higher purity often sold at a higher price and marketed as premium. But there’s not additional overhead for the reseller.

Finally, while I’m rooting for this vendor, I don’t think they’ll reach the scale of a car manufacturer in order to apply your car stereo analogy. So while “broadly” your expanded idea makes sense, in the context of what was being discussed, it doesn’t.
Click to expand...
It’s not a matter of scale, it’s a matter of scope. You can pick any one of 100 examples of tiered offerings at any scale and it applies; this isn’t a novel idea. So long as the manufacturers additional cost is factored into the price, it works. Multiple vendors here offer products in GSO and MCT, for example. Their equipment can be used to create more than one type of output; the idea of scope vs scale.
 
crispybacon! said:
I’m completely relaxed. Just pointing out the obvious reason what you were suggesting wouldn’t make much sense.

As for the GH comparison, it doesn’t translate, as the vast majority is simply resold, with the higher purity often sold at a higher price and marketed as premium. But there’s not additional overhead for the reseller.

Finally, while I’m rooting for this vendor, I don’t think they’ll reach the scale of a car manufacturer in order to apply your car stereo analogy. So while “broadly” your expanded idea makes sense, in the context of what was being discussed, it doesn’t.
Click to expand...
It’s not a matter of scale, it’s a matter of scope. You can pick any one of 100 examples of tiered offerings at any scale and it applies; this isn’t a novel idea. So long as the manufacturers additional cost is factored into the price, it works. Multiple vendors here offer products in GSO and MCT, for example. Their equipment can be used to create more than one type of output; the idea of scope vs scale.

My overall point though is that we have boomer rubes who are suggesting blind price increases, irregardless of the market. There would need to be some sort of understand of what the market will actually pay. As far as I can see it’s $25 for cn and $35 for domestic. TC is essentially a commodity.
 
Last edited:
21 vials left mig812 tren a 100. Large order just got paid and took most of it.

2 week ship timeline, orders taken now are preorders set to ship 1st January.

Working on getting more raw to restock it. I’m unsure of timeline yet.
 
You must log in or register to reply here.

Similar threads

Venom Lab
Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic
39 40 41
Replies
809
Views
71K
resaceterence
R
Defiant Pharma
Defiant Pharma (US Domestic)
84 85 86
Replies
2K
Views
106K
Defiant Pharma
Defiant Pharma
Wrangel7
Neurocognitive Effects of Supraphysiological rhGH + Filtration
2
Replies
36
Views
1K
Wrangel7
Wrangel7
OEP LABS
OEP LABS Domestic
300 301 302
Replies
6K
Views
298K
OEP LABS
OEP LABS
AllGoodThings
Transferring oils for long term storage
6 7 8
Replies
140
Views
9K
AllbrandNew
A

Sponsors

Latest posts

Back
Top