sp5der - QUALITY US DOMESTIC

[Photon]

want Eq made at 300 ? Or higher ?

650
It's pip free.
They sold hundreds if not thousands.

Janoshik Analytical

I brew mine at 750 now.
1/0

 

[Photon]

After going through @AllGoodThings long-term storage thread, it got me thinking.

Years ago, I brewed wine and honey (mead) as a hobby. One thing I learned pretty quickly is that wine and mead absolutely improve with age, but not just by being tossed in a bottle and forgotten.

There’s a reason you hear that distinctive pop when a cork releases. Commercially, there’s often a small amount of inert gas (like argon) occupying the headspace. That gas helps reduce oxygen exposure over time.

Because the real downfall in long-term storage isn’t time itself, it’s oxygen. Oxidation leads to degradation.

So while digging through old gear in the garage, I came across my old argon gas regulator and had a thought...What if?

What if, instead of leaving oils in small standard vials with normal air headspace, you transferred them into larger 30 mL, 50 mL, even 100 mL sterile vials, and displaced the air in the headspace with argon gas?
You can certainly do this with 10ml vials as well, just don't blow the topper.

In theory...
Argon is inert
It’s heavier than air
It displaces oxygen
It reduces oxidation in other applications (wine, mead, food storage)
So the question becomes If oxygen is the long term enemy of stability, could inert gas displacement meaningfully extend shelf life in stored oils?

Essentially like regulating the pressure on a new HGH vial, you would insert one pin to purge, while pinning the argon line and displacing oxygen. Of course you would need some PPE, a new sterile vial and measure pressure first while probably blowing a few toppers. But hey if you're holding that much stock long-term this is a minor addition. Even small hand held can editions exist.

Just thinking out loud here.

I'm going to shut my brain off now. It's going to force me to try this.

I feel you guys are going abit far with this storage thing..
But it works yes.

One needle in, bubble through the oil and one needle out.
Argon does dissolve a lil in the oil.

There's a guy who was talking about buying vacuumed vials at 0.3 a pop from India, you could just do that from CN and it'd be a much easier experience.

or..just get one of these..

Vacuum Glass Bottle 1000mL with 28mm Stopper Baxter 1A8504- 1 Each

www.medonthego.com

They have smaller bottles i believe, i dont remember. 250/500

 

[BALLISTIC]

I feel you guys are going abit far with this storage thing..
But it works yes.

One needle in, bubble through the oil and one needle out.
Argon does dissolve a lil in the oil.

There's a guy who was talking about buying vacuumed vials at 0.3 a pop from India, you could just do that from CN and it'd be a much easier experience.

or..just get one of these..

Vacuum Glass Bottle 1000mL with 28mm Stopper Baxter 1A8504- 1 Each

www.medonthego.com

They have smaller bottles i believe, i dont remember. 250/500

That was just my mind rambling on.

 

[Chadlitee]

It's pip free.
They sold hundreds if not thousands.

Janoshik Analytical

I brew mine at 750 now.
1/0

i heard sigma was bad now that test is from 2024 they still gtg?

 

[nobu156]

After going through @AllGoodThings long-term storage thread, it got me thinking.

Years ago, I brewed wine and honey (mead) as a hobby. One thing I learned pretty quickly is that wine and mead absolutely improve with age, but not just by being tossed in a bottle and forgotten.

There’s a reason you hear that distinctive pop when a cork releases. Commercially, there’s often a small amount of inert gas (like argon) occupying the headspace. That gas helps reduce oxygen exposure over time.

Because the real downfall in long-term storage isn’t time itself, it’s oxygen. Oxidation leads to degradation.

So while digging through old gear in the garage, I came across my old argon gas regulator and had a thought...What if?

What if, instead of leaving oils in small standard vials with normal air headspace, you transferred them into larger 30 mL, 50 mL, even 100 mL sterile vials, and displaced the air in the headspace with argon gas?
You can certainly do this with 10ml vials as well, just don't blow the topper.

In theory...
Argon is inert
It’s heavier than air
It displaces oxygen
It reduces oxidation in other applications (wine, mead, food storage)
So the question becomes If oxygen is the long term enemy of stability, could inert gas displacement meaningfully extend shelf life in stored oils?

Essentially like regulating the pressure on a new HGH vial, you would insert one pin to purge, while pinning the argon line and displacing oxygen. Of course you would need some PPE, a new sterile vial and measure pressure first while probably blowing a few toppers. But hey if you're holding that much stock long-term this is a minor addition. Even small hand held can editions exist.

Just thinking out loud here.

I'm going to shut my brain off now. It's going to force me to try this.

Wasn’t this discussed at length in that thread?

 

[BALLISTIC]

Wasn’t this discussed at length in that thread?

Yes, but I actually have all the equipment from home brewing. I would have to design a needle system to introduce. But I have a digital pressure regulator that if used correctly would essentially fill a 10ml to pressure then auto off.

My concern is gas escape. I don't have a way to measure that or ensure that any puncture to a self healing or not stopper would actually withhold gas long-term.

Honestly I just get bored my man.

 

[Andrewthatguy]

Yes, but I actually have all the equipment from home brewing. I would have to design a needle system to introduce. But I have a digital pressure regulator that if used correctly would essentially fill a 10ml to pressure then auto off.

My concern is gas escape. I don't have a way to measure that or ensure that any puncture to a self healing or not stopper would actually withhold gas long-term.

Honestly I just get bored my man.

Was home brewing really hard to learn? It’s kind of been in the back of my mind for a while.

 

[Andrewthatguy]

650
It's pip free.
They sold hundreds if not thousands.

Janoshik Analytical

I brew mine at 750 now.
1/0

Why the extra 50?

 

[BALLISTIC]

Was home brewing really hard to learn? It’s kind of been in the back of my mind for a while.

No man, and it was fun. Worst part is not rushing the process. My rec would be to find a local home brew store and they'll set you up.

Don't cheap out and just start with a good brand wine kit. All in will be 300.00 but 6 gallons done right can work out to 34 bottles. Once you have everything you need it's dirt cheap for great quality wine. About 3.50 bottle.

 

[sp5der]

Where are people getting my email to send me stuff like I’ll copy and paste a few:

I need a price for this

3 vials NPP
3 vials Primo

 

[sp5der]

Hello wha are the prices?

 

[sp5der]

(No subject)

Sent from my iPhone

 

[sp5der]

Hey heard your a good supplier and struggling to find your website if you could send it to me thanks.

 

[sp5der]

Hello I am interested in purchasing a kit of Hgh. I’d want to know the prices you have and see some testing. Please get back to me as soon as possible. Thank you,

 

[AllGoodThings]

Where are people getting my email to send me stuff like I’ll copy and paste a few:

I need a price for this

3 vials NPP
3 vials Primo

Hello wha are the prices?

(No subject)

Sent from my iPhone

Hey heard your a good supplier and struggling to find your website if you could send it to me thanks.

I couldn't do it, I really couldn't. I can't be forced to suffer fools and ignorant people.

 

[sp5der]

I couldn't do it, I really couldn't. I can't be forced to suffer fools and ignorant people.

Ik like wtf man. The emails only posted in the intro and pastebin and a couple places thru the thread. So how are they even getting it if not from there

 

[sp5der]

Dear SPDER,

I am Nicholas. A customer from Singapore also an aspiring men’s physique athelete.

I am looking for a source where I can rely my gear on for future competitions.

I usually need test , tren masteron etc .

Was wondering if you do shipments to Singapore and if you do what are the payment methods available.

Looking forward to hear your replies !

Cheers,
Nicholas

 

[sp5der]

How legit are you? How are your raws? How much will 7 test, 1 EQ and 1 Anadrol run me?





Sent from Proton Mail for iOS.

 

[sp5der]

Hey got your info off meso rx all my ugl from China are taking too long I figured I'd reach out

Im looking to put in a order hope u can help with a quote i been going thru the forums all day and found only a couple ppl that seemed trusting

This is my
Order I'm trying to place
Bpc 5mg + tb 5mg
20 bottles test e 250
1 bottle anavar
5 bottles test c 250
2 bottles masteron
2 bottles tren a 100

Please lmk if this is possible thanks man





Sent from Proton Mail for Android.

 

[Photon]

Edit

Hey got your info off meso rx all my ugl from China are taking too long I figured I'd reach out

Im looking to put in a order hope u can help with a quote i been going thru the forums all day and found only a couple ppl that seemed trusting

This is my
Order I'm trying to place
Bpc 5mg + tb 5mg
20 bottles test e 250
1 bottle anavar
5 bottles test c 250
2 bottles masteron
2 bottles tren a 100

Please lmk if this is possible thanks man





Sent from Proton Mail for Android.

Id start trolling all of them