the brew kit

[daylight driller]

Im not one to bash sources although in this case I think anyone considering buying this should seriously think twice for many reasons some being
#1 way to much ba and to much bb for certain compounds obviously the seller is not an experienced brewer
#2 you dont want a complete lab setup coming in the mail just in case it does just inspected (yes I know this is rare for domestic)
#3 if the seller does not know how much ba/bb he needs then how can you trust him to make sure the math is right
#4 can you trust this guy to send you 3% ba and not get the bottles confused and instead send you 20%ba and 3%bb
#5 How can you be sure that the sterile vials he is sending are in deed sterile?
#6 the most important is that the best part of brewing is knowing that you control everything going into your body you know that you have everything sterilized properly and that you are using the lowest amount of solvents possible. Saving money is just an added bonus.
Once again not trying to bash anyone but this is a harm reduction board and 3%ba is not helping with harm reduction.
@thebrewkit felt I should at least tag you. I think you could have a good service although it needs some tweakin, maybe send the ba/bb seperate so people can decide what to use or have different kits for different compounds.

 

[Big_paul]

could have a good service although it needs some tweakin, maybe send the

For the most part this is domestic raw source. What's the problem?

 

[daylight driller]

There is no problem with a domestic raw source but he is selling brew kits and as I stated Im not trying to bash on him but his concentrations are way off. If people buy this I would assume they are thinking that the source has a good understanding of the brewing process while they should do their own research they should also know that its to much ba and for some hormones way to much bb.

 

[thebrewkit]

Im not one to bash sources although in this case I think anyone considering buying this should seriously think twice for many reasons some being
#1 way to much ba and to much bb for certain compounds obviously the seller is not an experienced brewer
#2 you dont want a complete lab setup coming in the mail just in case it does just inspected (yes I know this is rare for domestic)
#3 if the seller does not know how much ba/bb he needs then how can you trust him to make sure the math is right
#4 can you trust this guy to send you 3% ba and not get the bottles confused and instead send you 20%ba and 3%bb
#5 How can you be sure that the sterile vials he is sending are in deed sterile?
#6 the most important is that the best part of brewing is knowing that you control everything going into your body you know that you have everything sterilized properly and that you are using the lowest amount of solvents possible. Saving money is just an added bonus.
Once again not trying to bash anyone but this is a harm reduction board and 3%ba is not helping with harm reduction.
@thebrewkit felt I should at least tag you. I think you could have a good service although it needs some tweakin, maybe send the ba/bb seperate so people can decide what to use or have different kits for different compounds.

ba,bb will be sent seperately in sealed sterile vials as well as the MCT oil. Also, when a buyer purchases 10ml vials of UG products, do they know that the UG lab took every precaution to ensure that what they are putting out there is sterile and contamination free? There is no way to know unless the buyer was there in person at the time of production. So, as a buyer myself from UG labs for many years, I just had to believe that what I was getting was quality gear, sterile and contamination free. With that said, I will let you know that all supplies will be purchased from MedLabSupply. The only difference from you purchasing the supplies from them yourself, is that they are coming to me first then to you inside "TheBrewKit!"

 

[Oregongearhead]

ba,bb will be sent seperately in sealed sterile vials as well as the MCT oil. Also, when a buyer purchases 10ml vials of UG products, do they know that the UG lab took every precaution to ensure that what they are putting out there is sterile and contamination free? There is no way to know unless the buyer was there in person at the time of production. So, as a buyer myself from UG labs for many years, I just had to believe that what I was getting was quality gear, sterile and contamination free. With that said, I will let you know that all supplies will be purchased from MedLabSupply. The only difference from you purchasing the supplies from them yourself, is that they are coming to me first then to you inside "TheBrewKit!"

@thebrewkit -- who's chemicals/oils do you use , have you disclosed this ? I would think your buying the Ba/Bb/oil in large volume , who makes it ? You should be able to disclose your legal product brands to see if your using quality sources . Theres alot of trust here besides the raws...

 

[Big_paul]

There is no problem with a domestic raw source but he is selling brew kits

Maybe brewkit could ship separately for those concerned.

I like the idea. I don't want to have a pack shipped from. China at this time and this guy covers all the bases. Chances of a pack being opened domestic are next to zero.

What I see is members putting this source on blast who have no interest in using this service. Some of us like the idea.

 

[Big_paul]

I guess it's how you make your bones here as vet. You protect members from scams. I get that, but I don't believe this is a scam.

I like saving $ by brewing and this makes it easy.

 

[Oregongearhead]

Has @thebrewkit went into sales mode yet ? Any buyer reports ?

 

[Big_paul]

Has @thebrewkit went into sales mode yet ? Any buyer reports ?

Not that I know of. I would like to see where this goes, and save the flame for when we have something solid. I'm considering using this myself.

 

[Big_paul]

concentrations are way off. If people buy this I would

He is sending extra solvents. Don't use all of it.

 

[daylight driller]

I guess it's how you make your bones here as vet. You protect members from scams. I get that, but I don't believe this is a scam.

I like saving $ by brewing and this makes it easy.

If you look at my post I told him that I think it could be a good service and now he says ba/bb ship separately so that is a plus. Im not a vet here, I dont jump on the source bashing train when a new source shows up, I learn new stuff all the time on this site. I am just trying to help others the way I was helped. I personally would feel sorry for anyone who put 3% ba and 20% bb in test e 250 thinking that since its in the kit it has to right. Sorry if I struck a nerve with you pointing this out but he has since corrected the ba/bb problem. Also the best part of homebrewing isnt saving money its knowing what you are putting in your body.

 

[daylight driller]

He is sending extra solvents. Don't use all of it.

He had said the ba/bb would be mixed into a sterile vial together. If you can explain to me how to take a mixture of 3% ba and 20% bb and draw out 1% ba and no bb for test e 250 I would love to learn how. Or if it makes it easier 1%ba and 5%bb.

 

[Obeast88]

If you look at my post I told him that I think it could be a good service and now he says ba/bb ship separately so that is a plus. Im not a vet here, I dont jump on the source bashing train when a new source shows up, I learn new stuff all the time on this site. I am just trying to help others the way I was helped. I personally would feel sorry for anyone who put 3% ba and 20% bb in test e 250 thinking that since its in the kit it has to right. Sorry if I struck a nerve with you pointing this out but he has since corrected the ba/bb problem. Also the best part of homebrewing isnt saving money its knowing what you are putting in your body.

I think you make a great point and help a lot especially to me. I have never brewed or having any experience so I would be lost without all the proper information so you are on the right track to me. Anyways still seems like a great idea to me and hope it all comes together.

 

[Big_paul]

He has made it clear that he is shipping extra solvent. It is not to be intended to use the entire amount. Test p may use 15% bb. test e may use 5% bb. He is shipping extra, use what you what.

The only time I comment about a new source is when I think it will be of interest to our members.

 

[Obeast88]

He has made it clear that he is shipping extra solvent. It is not to be intended to use the entire amount. Test p may use 15% bb. test e may use 5% bb. He is shipping extra use what you what.

The only time I comment on with a new source is when I think it will be of interest to our members.

Yea I see what your saying so basically everyone should still do their own homework before brewing with the kit and anyone who wouldn't do so isn't the brightest. The point of this site is harm reduction and we should utilize it for what it's meant.

 

[Big_paul]

I think you make a great point and help a lot especially to me. I have never brewed or having any experience so I would be lost without all the proper information so you are on the right track to me. Anyways still seems like a great idea to me and hope it all comes together.

It is up to you to understand what you are doing. I have helped dozens of members brew.

 

[Big_paul]

Just ask.

 

[Oregongearhead]

He is sending extra solvents. Don't use all of it.

Exactly , pre-measure everything including the raws . The oils , the solvents , the raws . Measure them all yourself....measure them twice , pour once

 

[daylight driller]

He has made it clear that he is shipping extra solvent. It is not to be intended to use the entire amount. Test p may use 15% bb. test e may use 5% bb. He is shipping extra, use what you what.

The only time I comment about a new source is when I think it will be of interest to our members.

I understand that its extra solvents however I cannot understand how if the are mixed together how ypu are goung to separate the 2 once mixed to get the desired amount. This is the first source thread that I have come into and posted negative. Normally if I post in a sources thread its bloodwork labmax or asking a question. If you stop defending him (maybe him is you) for 2 seconds and read my post you will see what Im saying. But since you are so worked up I never said anything about him reselling raws I pointed out some flaws that needed to ve fixed. Since then he has fixed the ba/bb problem. He has said he is getting sterile vials from medlab thats good. I wish him(you) the best of luck just try to do it right and not fuck anyone up

 

[Big_paul]

I understand that its extra solvents however I cannot understand how if the are mixed together how ypu are goung to separate the 2 once mixed to get the desired amount.

If they are mixed already then I'm with you. They must be shipped separately.

I see what you mean. I would only use the amount of ba and ba I what. If it is pre mixed that isn't going to work.

May be the option of order what you need should be available.