Before and after oven pics the one on the left came from the top of the media bottle and is actually good but it’s not even as green in the vials as It is in the media but I put the one of the left just so you could see the difference between these .
MESO-Rx
Anabolic Steroids
The Colour of gear
- Thread starter Blakeyy
- Start date
darkmarine
Member
well make my calculation are wrong but for 96 gram i would do
ba 7.6 ml 2 %
bb 68.4ml 18 %
mct 214.42
that would give me about 38 vial
I used that just slightly cut down the b.a and had an extra 4 grams of test I only used 15 %B.B. cause I have made it hold before with none it doesn’t need it I just add it cause it’s more easy cause it has no chance really of crashing it’s just a better to be safe than sorry thing.
Attachments
darkmarine
Member
Testosterone enanthate - 1g Displaces 0.943mL
Results - Amounts Needed
Oil - -175.36 ml's
Powder - -96 grams
ba - -6.40 ml's
bb - - 48ml's
just went to same website and you use the wrong powder weight
JackSmooth
Member
Wouldnt worry about powder weight. As long as ba and bb are good you can just level the oil off by eye. Only thing throwing final volune off is the +/-5% on the beaker. And even then youll just end up with either a slightly underdosed or overedosed product. Recipes isnt the issue here.
So the only difference is the fact I have10ml of oil extra but I also have 4 grams of test extra and if anything the extra oil should make it more clear cause more diluted if put not enough oil in then I could understand cause to
Much poweder for oil but I got 10ml extra so still makes 0 sense tbh am
Thinking about refiltering it just now just to see
darkmarine
Member
yes his gear is not 300mg anymore because he used more mct that he was suppose to used was just letting him know we just trying to find a reason why his test e look cloudy and went from green to orange
darkmarine
Member
you are correct the oil would make the gear more clear im at work think so hard to see what happened why your shit look like that
Ye exactly that’s why am pure pickled as to how the fuck this is happening. And I have went throw everything and though about it all again and this is my first time ever having this problem or any problem with test E and the only thing that has changed is the way my raws came a wax like brick solid substance that was like a clear wax colour . It’s the raws that are the problem here and nothing else I went over everything I done again and it’s all done right and the same way I always do it and do everything else and the same way I done the deca. And every time it goes into the oven on a semi high heat it goes orange. Why you might ask? I have no god dame fucken clue? Conclusion ? It’s getting chucked am always extra careful when making this shit and try do everything as clean as possible and am not one like most of these kids now a days who think their stuff might be bunk or not right but jag it anyway if am not at least 90% sure it’s safe can’t ever be 100 it doesn’t go into my body and I am not comfortable with this at all or even the way the raws looked I knew there was something up with them it’s why I took the picture .been doing this all god dame fucken day spent hours trying to fix it or make it better and nothing is working and am just not taking the risk R.I.P
picholas
New Member
Sorry is the one on the left or the one on the right the vial you took out of the oven?
sorry that's strange just noticed only one pic posted naw that picture is before the oven it turned orange on 3 separate times so its fucken gone now anyway shit was fucked and not risking that shit its away in the toilet spend all fucken day trying to get that shit to work and it wasn't happening I tried it all. the one on the left was what I pulled out but that was clear the futher down the you got the more greenish it was so as you can see the 2nd vial you can still see the green inside it. Put it in the oven and it goes pure orange.ill post the picture on another post gotta swap over to phone .I just put the clear vial on the left there was so you could see the difference between the pics if you get what I mean . This was the least orange one there was and that was 10mins the picture doesn't do it justice either its more orange than it looks in the picture that was 10mins at 180 degrees
Last edited:
Trainerdave
New Member
Smart man don’t shoot that in you, Deca looks perfect and both show up a lot of times melted or solid as rock. Bottom line “moisture will not effect color” cloudiness yes but color absolutely not impossible moisture is H20 and it is clear if you cook some MCT oil with BB and BA add little water I will garuntee you that it will not turn green. It’s chemistry not guessing game and chemistry like math has definite black and white answers.
Continuing to add hest just cooked hell out of it that’s the brownish color it’s getting oxidized destroying the steroid molecules. How high did you heat if it has melting point 36C really shouldn’t be baking hell out of it with high heat again just destroying the Test.
If was moisture it would turn clear around or slightly above melting point and as soon as cools it would cloud right back up it’s now part of the suspension you can’t get it out without destroying steroid. So bottom line smart move not using it but absolutely PPL needs better explanation then putting it on you. That’s a case of major impurities in the raws no amount filtering heating fixes. One of only was is recrystalization which separates the drug from the impurities as when crytalizes you now have pure form of what you purchased but if it’s way less grams than paid for then can figure exactly how pure or not your raw is and not too many out there are 95% or above, try it for selves.
Thanks again for sharing your experience and good decision to trash it now let’s see if PPL does right thing replaces. If he wont feel free PM me I’m all about helping brothers anyway I can. Be well!!
Continuing to add hest just cooked hell out of it that’s the brownish color it’s getting oxidized destroying the steroid molecules. How high did you heat if it has melting point 36C really shouldn’t be baking hell out of it with high heat again just destroying the Test.
If was moisture it would turn clear around or slightly above melting point and as soon as cools it would cloud right back up it’s now part of the suspension you can’t get it out without destroying steroid. So bottom line smart move not using it but absolutely PPL needs better explanation then putting it on you. That’s a case of major impurities in the raws no amount filtering heating fixes. One of only was is recrystalization which separates the drug from the impurities as when crytalizes you now have pure form of what you purchased but if it’s way less grams than paid for then can figure exactly how pure or not your raw is and not too many out there are 95% or above, try it for selves.
Thanks again for sharing your experience and good decision to trash it now let’s see if PPL does right thing replaces. If he wont feel free PM me I’m all about helping brothers anyway I can. Be well!!
ye am totally not sure about that at all and spend all day trying to fix that shit and I went over it again and again and again in my head its the raws 1000% and didn't wanna take the risk. without sucking his arse to much apart from this little hick up I don't have a bad thing to say about PPL my TDA has always been really quick for some reason strange cause a lot of people have problems but he has always been really good when dealing with me and his products have always been amazing apart from this test e obv haha his customer service has just always been really good to me . Am not to fussed about him replacing it I mean its one of they things shit happenes sometimes just gotta get on with it and its not that expensive anyway so if need be ill fork out again to get some more.i regretted not getting npp anyway so ill probs just need to buy some more and ill get some npp when am at it.
picholas
New Member
Don't trash it, try a lower temperature. 30 minutes at 150, if it still changes color try 30 minutes at 125, and then same thing 100.
10ml at a time.
10ml at a time.
to late its gone and am not going into the toilet to get it back haha. I tried 3 different vials and all at smaller times and temps and the same happened every time .10mins at 180 and it was still far far to orange like even half of as orange as it was and I still wouldn't of put that inside me. I don't know what was wrong with it but defo something wrong with the raws I even tried the pan at a low temp and left it on there cooling down so it took ages and still the same was starting to notice a tiny bit of black residue where its burning it.It was fucked and spend far far far to long trying to resalvage it my whole fucken day just trying to brew basic test e
darkmarine
Member
that would be crazy if them send him tren a and no test e
haha if it was tren then it would of been the right colour but its suppose to be Test E lol . but its gone now and don't fancy licking my toilet bowl =D. spend all day trying to fix this shit and used 2 bottle tops filter just have enough of it tbh.On that note though maybe they have made a mistake and gave me 100g tren instead of test who knows. but I do have 2 of the things they sent with nothing on it had to scale it out and look at order to identify what it was. ill show you in one sec ill post it on the phone.Miby they have sent the wrong thing out I honestly have no clue with this one it makes 0 sense to me.
two other products came without labelling so maybe made a mistake I mean that is a possibility and why I cant get it to go away
