Titanium Gear Industries (domestic source)

[Masters Power]

I was just trying to make tgi hate me less. I think if I encouraged dick pics on his thread he might retaliate and send me something to turn me into a dick clit chick instead of hot chick var. always 2 steps ahead

I have already seen too many things I can't unsee in here. Dick pics would force a Masters boycott of the thread.

 

[Roger rabbit]

Cant we get like a
Test/tren/mast/eq bend?
300/400/400/150 per ml?

Shit would be dope! lol

Shit a test e 500 in EO is all u need. My friends personal favorite lol.

Test is king.

 

[Heavy Iron]

You hold that beaker up and smile over how pretty that sweet clean oil is! So you always want it spot on, am i right?

Lol yeah you're right. Either way man you do way more than any UGL I've seen roll through. Keep it up man

 

[iceman440]

Shit a test e 500 in EO is all u need. My friends personal favorite lol.

Test is king.

So tren test mast eq
500 500 500 150 per ml! Even better

 

[tengtren]

So tren test mast eq
500 500 500 150 per ml! Even better

Nah what you want it Tren/TreN/trEn/tRen/
1g/2g/3g/.00098816mcg

 

[TheObjective1]

Hey brothers switched to nights trying to a acclimate to it so have little time to read qnd keep up. Has anyone tried his. Winny,provirion, TPP/NPP blend? ALSO ANY ONE TRIED HIS AROM 12.5? any feed back helps thanks gents.

Thinking of kickstartinh with winny and dbol for the synergy of them .

Looking something at a run of.
Test C 500 -wk
NPP-400wk
Havent decided mast E or EQ yet.
Winny 5o mg Ed 1-6
Dbol 25- 50mg ed 1-4
Proviron -25 -50 mg 1-6 wks .

 

[Urgentfury12]

Hey brothers switched to nights trying to a acclimate to it so have little time to read qnd keep up. Has anyone tried his. Winny,provirion, TPP/NPP blend? ALSO ANY ONE TRIED HIS AROM 12.5? any feed back helps thanks gents.

Thinking of kickstartinh with winny and dbol for the synergy of them .

Looking something at a run of.
Test C 500 -wk
NPP-400wk
Havent decided mast E or EQ yet.
Winny 5o mg Ed 1-6
Dbol 25- 50mg ed 1-4
Proviron -25 -50 mg 1-6 wks .

I’m using his 12.5 Aromasin x3 a week. I have no official science on it but feels like it’s doing its job. I was using it just two times a week but upped it to 3 recently.

 

[BigBaldBeardGuy]

Hey brothers switched to nights trying to a acclimate to it so have little time to read qnd keep up. Has anyone tried his. Winny,provirion, TPP/NPP blend? ALSO ANY ONE TRIED HIS AROM 12.5? any feed back helps thanks gents.

Thinking of kickstartinh with winny and dbol for the synergy of them .

Looking something at a run of.
Test C 500 -wk
NPP-400wk
Havent decided mast E or EQ yet.
Winny 5o mg Ed 1-6
Dbol 25- 50mg ed 1-4
Proviron -25 -50 mg 1-6 wks .

Did you ask the same question in every thread of the Underground or just a select few? Nobody is going to spoon feed you bud. Do your homework and make your own decisions. It’s your own body and health.

 

[iceman440]

Nah what you want it Tren/TreN/trEn/tRen/
1g/2g/3g/.00098816mcg

Love it! No wonder your so jacked!

 

[Hiltman]

Summarized version

8. TEST PROP 99.74%
9. AROMASIN 99.97%
10. NPP 98.35%
11. TPP 99.88%
12. ANADROL 97.0%
13. NOLVA 99.98%
14. PROVIRON 99.88%
15. DBOL 99.9%
16. MAST P 99.46%
17. TNE 99.98%
18. TBOL 99.84%
19. DHB 96.8% (minor TNE content)
20. SUST 250 TEST PROP 15
TPP 45.2
TEST ISO 91.0
TEST D 105.2
TOTAL---255.4
21. TREN E 99.98%
22. SDROL 99.86%
23. DECA 99.87%
24. CLOMID 99.02%
25. ADEX .52MG/CAPSULE
26. TREN A 99.46%
Dhb oil 132mg
Hgh 6mg/18iu zero dimer content

Good shit man!!

 

[really small guy]

Yes you are right @TitaniumGear (TGI), you went over, you missed the allotted %10, but you fessed up...manned up, you will probably catch some shit...but at the end of the day look at it this way, you're the only source out there with high dosed DHB. Now all of your customers can run 428mg per week(on a true eod schedule, and on the weeks with 4 pins), and only have to pin 1ml eod!! And even if they want to stick to 100mg eod then they get to pin even less! There's a bright side to this bro. Don't be so laser focused on the bad...take a fucking sharpie and write 132mg per ml on a piece of tape over your label. Gear is gear bro

Ye man...

 

[really small guy]

thank you. I will do better. Batch 4
After restock and what not.

i see. But still i hate mistakes. Not the raws. Not the equipment. Me. 2 OD's. I will get it right though. I appreciate the encouragement.

why you saying this? Cause i fucked up your sauce? At least it pissed me off enough to do another go at it.

U are particular. Ur a perfectionist even. It's good to know someone handling the shit we put into our bodies is particular
.. and not someone who just doesn't give a fuck. It's a good job for a perfectionist.

 

[BigBaldBeardGuy]

U are particular. Ur a perfectionist even. It's good to know someone handling the shit we put into our bodies is particular
.. and not someone who just doesn't give a fuck. It's a good job for a perfectionist.

Would you expect him to say “I like brewing steroids because it’s easy as fuck. I rip a few bong hits, pop some adderal, clear the dirty dishes off to the side of the counter and blast EDM music while I dance around in my Superman underoos mixing steroid powders into oil with my grandmothers kitchenaid blender”?

Who knows which one is closer to the truth. His product is good but we don’t need to promote him to steroid god level just yet. Keep your expectations in check: clean, quality product at a good price with good customer service.

And this by no means is a knock at you @TitaniumGear (TGI), this is true for all UGLs. You just happen to currently meet our expectations and we show our appreciation by purchasing your products.

 

[really small guy]

He was compensating for draw loss. I really only see a problem with a 30% OD on serms, AI’s and stuff the ladies use like primo and var

Strap on for the win

Does anyone else lose a ton when pinning delts... That batch would be perfect I bet.. lol. It doesn't always happen.. sometimes it just trickles . But sometimes it will drip halfway down my arm... Don't even know how much I lose . I try to tape over it when it happens lol. Doesnt happen anywhere else. And like 50% of the time or less.. but when it happens it comes out lol. Might be the pins that take a bit longer...it's like the pin is in there too long so the hole doesn't seal up.... I don't fucking know . Is this just me?

 

[really small guy]

Would you expect him to say “I like brewing steroids because it’s easy as fuck. I rip a few bong hits, pop some adderal, clear the dirty dishes off to the side of the counter and blast EDM music while I dance around in my Superman underoos mixing steroid powders into oil with my grandmothers kitchenaid blender”?

Who knows which one is closer to the truth. His product is good but we don’t need to promote him to steroid god level just yet. Keep your expectations in check: clean, quality product at a good price with good customer service.

And this by no means is a knock at you @TitaniumGear (TGI), this is true for all UGLs. You just happen to currently meet our expectations and we show our appreciation by purchasing your products.

No I don't want him saying that lol. I just think it's not such a huge deal. He's really upset about it. Lol.

 

[Roger rabbit]

Does anyone else lose a ton when pinning delts... That batch would be perfect I bet.. lol. It doesn't always happen.. sometimes it just trickles . But sometimes it will drip halfway down my arm... Don't even know how much I lose . I try to tape over it when it happens lol. Doesnt happen anywhere else. And like 50% of the time or less.. but when it happens it comes out lol. Might be the pins that take a bit longer...it's like the pin is in there too long so the hole doesn't seal up.... I don't fucking know . Is this just me?

Use the z method when pinning and this won’t happen

 

[Iron Vett]

Does anyone else lose a ton when pinning delts... That batch would be perfect I bet.. lol. It doesn't always happen.. sometimes it just trickles . But sometimes it will drip halfway down my arm... Don't even know how much I lose . I try to tape over it when it happens lol. Doesnt happen anywhere else. And like 50% of the time or less.. but when it happens it comes out lol. Might be the pins that take a bit longer...it's like the pin is in there too long so the hole doesn't seal up.... I don't fucking know . Is this just me?

Take a gauze or cotton ball and immediately apply a good bit of pressure to the injection point when withdrawing the needle for about a minute. This will allow the tissues to settle back into place enough to keep the oil from leaking through the puncture. Also this technique can help to prevent the small bruises that can occcur around an injection site since the pressure will help to hold back the blood below the skin and not allow it to collect around the injection site.

 

[Urgentfury12]

Does anyone else lose a ton when pinning delts... That batch would be perfect I bet.. lol. It doesn't always happen.. sometimes it just trickles . But sometimes it will drip halfway down my arm... Don't even know how much I lose . I try to tape over it when it happens lol. Doesnt happen anywhere else. And like 50% of the time or less.. but when it happens it comes out lol. Might be the pins that take a bit longer...it's like the pin is in there too long so the hole doesn't seal up.... I don't fucking know . Is this just me?

What size needle ? And dart it in, push the oil slowly and pull the needle out quickly. You might get a bit of blood trickling out but no biggie. I’ve always used 1 inch no matter where I pin and never have had any oil leak. I’m not even getting oil leak off these slin pins I’m using ED for the TREN.

 

[really small guy]

Should be swell

Hey brothers switched to nights trying to a acclimate to it so have little time to read qnd keep up. Has anyone tried his. Winny,provirion, TPP/NPP blend? ALSO ANY ONE TRIED HIS AROM 12.5? any feed back helps thanks gents.

Thinking of kickstartinh with winny and dbol for the synergy of them .

Looking something at a run of.
Test C 500 -wk
NPP-400wk
Havent decided mast E or EQ yet.
Winny 5o mg Ed 1-6
Dbol 25- 50mg ed 1-4
Proviron -25 -50 mg 1-6 wks .

 

[really small guy]

What size needle ? And dart it in, push the oil slowly and pull the needle out quickly. You might get a bit of blood trickling out but no biggie. I’ve always used 1 inch no matter where I pin and never have had any oil leak. I’m not even getting oil leak off these slin pins I’m using ED for the TREN.

That's how I do it... But I use 23g 1.5 . For draw and pin to keep it simple. Maybe I don't "dart in".. I'll try doing that a bit quicker. Its like just sometimes a good amount of oil oimes with that blood... Im gona do the cotton ball the ither guy suggested