MESO-Rx

Anabolic Steroids

Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic

Venom Lab said:
Problem with winstrol is not making it hold is the PIP.

It's crippling without guiacol at 50mg and even at 40mg.

Probably only way to do it is 25mg/ml a very low concentration, not sure it's even worth it.
Click to expand...
For winstrol 25mg/ml is a valid option in my opinion. That wouldn't be a factor to consider it worth.. it is so difficult to find winstrol oil based that I believe people wouldnt bother
 
SwitchBlade said:
For winstrol 25mg/ml is a valid option in my opinion. That wouldn't be a factor to consider it worth.. it is so difficult to find winstrol oil based that I believe people wouldnt bother
Click to expand...
I'll get on it then, I wanna first test it on myself, tomorrow I'll have some brewing to do :)

Stay tuned.

You are probably right if it's 100℅ pipless especially, not a big deal injecting 2ml either especially if it absorbs quickly. I'll fiddle with few recipes and we will see what I can make of it.
 
Venom Lab said:
Guys I need to gather your opinions on anadrol 50mg/ml

Going straight to the point: anadrol 50mg is really one of the most difficult substance together with winstrol to hold at 50mg without using any guiacol.

So it holds but it is very very sensitive to any decrease in tempersture and I'm talking about even 12/16 degrees upset the brew and start forming micro crystal.
It's easy to uncrash and if kept in a baby warmer wiper it doesn't crash ever again or if you are lucky and get that lucky vial it doesn't crash at all (yeah same brew, 20 different vials, you can have 40℅ vials crashing and the other not crashing, it's the beauty of hormones)

Now as I'll never use guiacol in my products we have few options.

EO
Mig840
Castor oil

EO and castor oil are similar they both works better than other carriers in helping orals injectable in holding and not crashing out of solution.

EO maybe slightly better than castor.

EO is thin very thin
Castor is thick and slow down a little bit absorption.

So would you be ok in anadrol brewed with EO?

And with castor?

50/50 mix EO/castor?

You can't have it all, this is the point of this conversation.

Personally I don't find the whole EO is toxic arguments really true, would I use EO anywhere? No.
Would I use it as the major carrier? No.

Would I use it in some specific brew? Yes I would.

But there is no point in making something thr majority of you won't inject so here are, let's have your thoughts and let's see what is your preference.

Of course another choice is Reducing concentration but who wants to inject anadrol 40mg/ml I don't think anyone.
Click to expand...
I'd go with some EO+castor but I'm a sucker for prolonging half life as much as possible to pin less.
Got real tired of being a pin cushin from when I was doing Tren A lol
 
First order arrived today. Fast shipping, very efficient communication at all time. Packaging very well done.
The first of many.
To me can already be considered a reference for EU source.
 
Venom Lab said:
Guys I need to gather your opinions on anadrol 50mg/ml

Going straight to the point: anadrol 50mg is really one of the most difficult substance together with winstrol to hold at 50mg without using any guiacol.

So it holds but it is very very sensitive to any decrease in tempersture and I'm talking about even 12/16 degrees upset the brew and start forming micro crystal.
It's easy to uncrash and if kept in a baby warmer wiper it doesn't crash ever again or if you are lucky and get that lucky vial it doesn't crash at all (yeah same brew, 20 different vials, you can have 40℅ vials crashing and the other not crashing, it's the beauty of hormones)

Now as I'll never use guiacol in my products we have few options.

EO
Mig840
Castor oil

EO and castor oil are similar they both works better than other carriers in helping orals injectable in holding and not crashing out of solution.

EO maybe slightly better than castor.

EO is thin very thin
Castor is thick and slow down a little bit absorption.

So would you be ok in anadrol brewed with EO?

And with castor?

50/50 mix EO/castor?

You can't have it all, this is the point of this conversation.

Personally I don't find the whole EO is toxic arguments really true, would I use EO anywhere? No.
Would I use it as the major carrier? No.

Would I use it in some specific brew? Yes I would.

But there is no point in making something thr majority of you won't inject so here are, let's have your thoughts and let's see what is your preference.

Of course another choice is Reducing concentration but who wants to inject anadrol 40mg/ml I don't think anyone.
Click to expand...
Eo is fine with me
 
Venom Lab said:
Guys I need to gather your opinions on anadrol 50mg/ml

Going straight to the point: anadrol 50mg is really one of the most difficult substance together with winstrol to hold at 50mg without using any guiacol.

So it holds but it is very very sensitive to any decrease in tempersture and I'm talking about even 12/16 degrees upset the brew and start forming micro crystal.
It's easy to uncrash and if kept in a baby warmer wiper it doesn't crash ever again or if you are lucky and get that lucky vial it doesn't crash at all (yeah same brew, 20 different vials, you can have 40℅ vials crashing and the other not crashing, it's the beauty of hormones)

Now as I'll never use guiacol in my products we have few options.

EO
Mig840
Castor oil

EO and castor oil are similar they both works better than other carriers in helping orals injectable in holding and not crashing out of solution.

EO maybe slightly better than castor.

EO is thin very thin
Castor is thick and slow down a little bit absorption.

So would you be ok in anadrol brewed with EO?

And with castor?

50/50 mix EO/castor?

You can't have it all, this is the point of this conversation.

Personally I don't find the whole EO is toxic arguments really true, would I use EO anywhere? No.
Would I use it as the major carrier? No.

Would I use it in some specific brew? Yes I would.

But there is no point in making something thr majority of you won't inject so here are, let's have your thoughts and let's see what is your preference.

Of course another choice is Reducing concentration but who wants to inject anadrol 40mg/ml I don't think anyone.
Click to expand...

I was actually starting to get interested in injectable anadrol, but if it would contain EO it would be no for me personally. Why? because you want to keep on top of your bloodwork when using anadrol and having another factor like EO cloud that judgement is not helpful.

Castor does not delay absorption that much vs mct (2-2.5 hours for full absorption vs 1.5 hours for mct.)

If it holds in a 50-50, 40-60 or 30-70 ratio MCT-Castor, why not do that? If I had to pick from your options I would always go full castor.
 
You must log in or register to reply here.

Similar threads

Great Northern Peptides
Great Northern Peptides - Canadian Domestic Peptides
2
Replies
20
Views
865
clearheaded
C
Photon
(US) Vendor gear found with dissolved brewing equipment (Plastic)
4 5 6
Replies
113
Views
8K
jpe1
J
OEP LABS
OEP LABS Domestic
261 262 263
Replies
5K
Views
240K
Erock523
Erock523
Defiant Pharma
Defiant Pharma (US Domestic)
61 62 63
Replies
1K
Views
72K
readalot
R
J
Source for US Domestic Dutasteride raws?
Replies
15
Views
580
NOCTURNALDEATH
N

Sponsors

Latest posts

Back
Top