Where to buy oil carriers in europe?

gacela

New Member
Hi, I came to ask where I could buy an oil like grapeseed, to cut AAs, it is only to lower the concentration of a product so I am not interested in buying large quantities, and for example medlab, it would cost me more shipping costs 100 USD, so I asked for an online oil store in Europe so that the price was not too high, and another question.
I wanted to ask if there is something wrong with mixing different types of oil, the product I use has oil Myg. 812, and I wanted to know if I can mix it with any other type of oil, thanks.
I also want to ask if any of the grapeseed oil on the internet works for this, i mean if the grapeseed oils for massage or cooking is ok to use when they are 100% grapeseed, for example :
 
i dont think mixing two different oil is good idea . buy organic cold pressed grapeseed oil and you are good to go and if you are thinking about adding grapessed oil in your gear vial which is miglyol 812 based i dont think its good idea .
 
Mixing two oils is fine. You probably have to filter it. But you could just mixed it and put it in the oven for 220f for 20min and be g2g.

Also you wanna use it within the same month you mixed. Or just add a hair more of BA and then you can store it for long term.
 
My intention is to reduce the contraction of each injection of testosterone propionate, since from what I have investigated it usually causes pain in the concentration of 100mg / ml, and that the optimal would be 50mg / ml, so my idea was to remove 1 ml from the vial to the syringe, and add another ml of grape seed oil to reduce the concentration of the injection, since from what I have read this greatly reduces pain.

And I have thought about using this oil because I have read that it is used for this, and that it is easy to find, the question is whether for this purpose any oil that you find in grape seed amazon that is 100% pure, for example this:

I can not buy it in American pages of laboratory supplies, because they take more than 1 month to arrive and shipping would cost me about 100 USD.
 
My intention is to reduce the contraction of each injection of testosterone propionate, since from what I have investigated it usually causes pain in the concentration of 100mg / ml, and that the optimal would be 50mg / ml, so my idea was to remove 1 ml from the vial to the syringe, and add another ml of grape seed oil to reduce the concentration of the injection, since from what I have read this greatly reduces pain.

And I have thought about using this oil because I have read that it is used for this, and that it is easy to find, the question is whether for this purpose any oil that you find in grape seed amazon that is 100% pure, for example this:

I can not buy it in American pages of laboratory supplies, because they take more than 1 month to arrive and shipping would cost me about 100 USD.
IDK why the link of amazon doesnt appear, but u can search for this to take a look:
Naissance Certified Organic Grapeseed Oil 60ml - Pure, Natural, Cold Pressed, Vegan, Hexane Free, No GMO - Natural Moisturiser & Conditioner for Hair and Skin - Ideal for Massage & DIY Beard Oil
 
IDK why the link of amazon doesnt appear, but u can search for this to take a look:
Naissance Certified Organic Grapeseed Oil 60ml - Pure, Natural, Cold Pressed, Vegan, Hexane Free, No GMO - Natural Moisturiser & Conditioner for Hair and Skin - Ideal for Massage & DIY Beard Oil
Basically any oil is fine you could probably find one in your kitchen right now. Thats not the hard part. You haven’t said anything about your sterilization process.
 
Basically any oil is fine you could probably find one in your kitchen right now. Thats not the hard part. You haven’t said anything about your sterilization process.
I never did home brew, i dont realy know how to sterilize oil, u have any link or advice to help me ?
 
I never did home brew, i dont realy know how to sterilize oil, u have any link or advice to help me ?
hmm i would say buy a bigger sterilized vial filter the test prop you have in that big vial by attaching syringe filter and add the amount of gso you want in your new big vial by attaching new syringe filter now you have sterile test prop cut down to 50mg/ml.
 
You can mix the oil and throw in the oven at 220f for 20min. Most might say that’s risky though. I’ve done it and never had issues.
 
My intention is to reduce the contraction of each injection of testosterone propionate, since from what I have investigated it usually causes pain in the concentration of 100mg / ml, and that the optimal would be 50mg / ml, so my idea was to remove 1 ml from the vial to the syringe, and add another ml of grape seed oil to reduce the concentration of the injection, since from what I have read this greatly reduces pain.
.

Just to clarify, have you actually tried using the 100mg/ml propionate & found that it does give you post injection pain (PIP)?

Or have you not tried using it yet, but have read of people getting PIP from 100mg/ml propionate & are trying to avoid that possibility?

If you haven't actually tried 100mg/ml yet, I would say just try it & find out first before trying to dilute it down to 50mg/ml. Yes, it might cause PIP. I prefer not to use it because of that, but it isn't that bad that I can't put up with it for 3-4 days. It's just unpleasant. But a lot of guys get literally no pain at all from it.

My concern is that from what I'm understanding, you don't really know anything about homebrew yet , I suspect you're not a particularly experienced steroid user (?), but are considering experimenting anyway when you might not have to.

If so then I think you need to take the simple step & just try the 100mg/ml prop first mate.
 
Just to clarify, have you actually tried using the 100mg/ml propionate & found that it does give you post injection pain (PIP)?

Or have you not tried using it yet, but have read of people getting PIP from 100mg/ml propionate & are trying to avoid that possibility?

If you haven't actually tried 100mg/ml yet, I would say just try it & find out first before trying to dilute it down to 50mg/ml. Yes, it might cause PIP. I prefer not to use it because of that, but it isn't that bad that I can't put up with it for 3-4 days. It's just unpleasant. But a lot of guys get literally no pain at all from it.

My concern is that from what I'm understanding, you don't really know anything about homebrew yet , I suspect you're not a particularly experienced steroid user (?), but are considering experimenting anyway when you might not have to.

If so then I think you need to take the simple step & just try the 100mg/ml prop first mate.
Thanks for the advice, I had already tried it and it caused me a lot of pain, so I started looking for how to reduce it, but I do not know if I have become more accustomed to it or have simply improved the injection technique, but the post injection pain has been greatly reduced today, so I don't think I need to add more oil, and as you say, the fewer processes unknown to me, the better.
 
Good to hear PIP is reducing mate.

It's normal to get some PIP when you first start injecting, even with things like pharma grade test enanthate, which is as PIP free as it gets.

Lots of things you can do to reduce PIP, but one of the simplest is to inject smoothly & slowly - 1 minute per ml, no quicker.
 
i dont think mixing two different oil is good idea . buy organic cold pressed grapeseed oil and you are good to go and if you are thinking about adding grapessed oil in your gear vial which is miglyol 812 based i dont think its good idea .
Mixing oils is no problem my carrier oil is a mix of 2 organic seed oils plus miglyol 840, and EO in a low percentage. Im even thinking about adding one more organic seed oil for some properties it offers.

To the OP you should be able to get it anywhere you want. I buy some local, and some on amazon. The variety of oils you can use is endless.
 
I do not know why I have much less pain when I inject myself in the buttocks than in any other place, when I do it in the shoulders or quadriceps I am two or three days with pain and inflammation, however in the buttocks I do not have that problem, I do not know What can be, does anyone know any advice to reduce pain and inflammation apart from heating the oil before, massaging the area, etc.?
 
Mixing oils is no problem my carrier oil is a mix of 2 organic seed oils plus miglyol 840, and EO in a low percentage. Im even thinking about adding one more organic seed oil for some properties it offers.

To the OP you should be able to get it anywhere you want. I buy some local, and some on amazon. The variety of oils you can use is endless.
Which oils of amazon are fine to inject?
 
Back
Top