[SOURCE] Olympia Labs

[BigBaldBeardGuy]

Were from what i see he is an asshole, his facade dropped as soon as he got pushed a bit, go to BOP where everyone will be like: oh your label is so awesome!! Oh you sell test??? So cooool!

Olympia labs my ass, get the mountain of the gods of your name and rename it to tartarus labs

Well... BOP would be an option IF he didn’t have the same name as a lab that was on again/ off again over there already.

Oh and this Special Olympia doesn’t have labels. Just pretty colored circle stickers like we used to get for being good in 1st grade. Trust us, Orange is Testosterone.

 

[Olympia Labs]

Well from the looks of it he will just tell the customer to fuck off as he will already have the btc.

Got several orders off board members. A couple are sending the vials for testing from what they said. I sign the emails with best regards instead of fuck off. Tends to work out better!

 

[Olympia Labs]

Well... BOP would be an option IF he didn’t have the same name as a lab that was on again/ off again over there already.

Oh and this Olympia doesn’t have labels. Just pretty colored circle stickers like we used to get for being good in 1st grade. Trust us, Orange is Testosterone.

Orange is tren-ace

 

[TX_Hempknight]

Orange is tren-ace

That makes no fucking sense....

 

[mp46]

The problem is you said “It’s a Precision compact dry heat oven.” That doesn’t mean anything about sterilization. Ovens are designed circulate air to keep heat even and also dry things outs. That circulation of air usually means fresh air in to remove wet air from the chamber.

This is why I asked what model youre using, because it matters. If you get on thermos website and look at their “Precision compact ovens” they don’t list sterilization as an attribute. Your attached photos say it’s a mechanical convection, but again, their website doesn’t list sterilization as function on the mechanical convection ovens I pulled up. So yet again the model number matters because the same source, thermo, lists different things for the same thing.

All this means you can fuck off with your attitude when members are making sure you’re actually using correct equipment so we don’t die of sepsis or some shit.

 

[BigBaldBeardGuy]

Got several orders off board members. A couple are sending the vials for testing from what they said. I sign the emails with best regards instead of fuck off. Tends to work out better!

Classic line. @MisterSuperGod is this page 6 of the New Source Handbook? I believe it’s right after “lash out and discredit the meddling kid that keeps asking all the smart questions”?

Next will be “the guys that ordered are too afraid to post because they’ll get bullied”.

We’ll nip that shit in the bud right now. Anyone that ordered will not get bullied. I say that all the time and I’ve always kept my word.

 

[TX_Hempknight]

Classic line. @MisterSuperGod is this page 6 of the New Source Handbook? I believe it’s right after “lash out and discredit the meddling kid that keeps asking all the smart questions”?

Next will be “the guys that ordered are too afraid to post because they’ll get bullied”.

We’ll nip that shit in the bud right now. Anyone that ordered will not get bullied. I say that all the time and I’ve always kept my word.

I concur. We encourage members to post about ordering. It gives us insight into how the source operates, how the ordering goes, TA times, packaging, etc. Now if you come in here dick holding and carressing his ego, thats another topic altogether.

To reiterate, we will NOT bash any members for ordering and posting about it. Thats just dumb and doesnt benefit no one.

 

[Olympia Labs]

The problem is you said “It’s a Precision compact dry heat oven.” That doesn’t mean anything about sterilization. Ovens are designed circulate air to keep heat even and also dry things outs. That circulation of air usually means fresh air in to remove wet air from the chamber.

This is why I asked what model youre using, because it matters. If you get on thermos website and look at their “Precision compact ovens” they don’t list sterilization as an attribute. Your attached photos say it’s a mechanical convection, but again, their website doesn’t list sterilization as function on the mechanical convection ovens I pulled up. So yet again the model number matters because the same source, thermo, lists different things for the same thing.

All this means you can fuck off with your attitude when members are making sure you’re actually using correct equipment so we don’t die of sepsis or some shit.

On the first page of the introduction it states the Thermo Scientific Precision compact oven sterilizes. I can get the model # for you as well today. Mechanical convection is the model type.

 

[Olympia Labs]

Classic line. @MisterSuperGod is this page 6 of the New Source Handbook? I believe it’s right after “lash out and discredit the meddling kid that keeps asking all the smart questions”?

Next will be “the guys that ordered are too afraid to post because they’ll get bullied”.

We’ll nip that shit in the bud right now. Anyone that ordered will not get bullied. I say that all the time and I’ve always kept my word.

They definitely should not get bullied. A couple of them mentioned they will be sending the vials in for testing to post. They'll be given store credit for that and I'm looking forward to them posting. All their orders shipped within 6 hours of ordering.

 

[mp46]

We prefer you not to be a dick. Apparently you cant do that. You have the attention span and patience of a small child. @mp46 seems to be well educated on several topics and to my knowledge has a job, therefore he cant sit around and disprove your bullshit all day long. Some of us have the luxury of being able to pop in here and shit on you during the day, others will get to shitting on you later tonight. We like to take shifts shitting on new sources.

My boss actually walked in my office while I was typing that last message, I was called into their office yesterday to address my attention and attendance, and my use of the phone/internet has been called out many times.

Basically I’m the realist motherfucker on here and I put it all on the line for this community.

@Olympia Labs what I do for a living is irellevant. I can be a janitor in a lab testing concrete samples and sterilization is just as important to make sure a chemist and civil engineer can make concrete that won’t collapse a bridge or building. Or I could be a secret agent infiltrating bio weapons labs in clandestine locations. Or fuck, I could just be stocking groceries; all of that is irellevant for me or even for you. I don’t care if you wash cars during the day, as long as the gear you make in your moms basement is sterilie and high quality. It goes over much easier when you have a discussion instead of having a fit.

 

[mp46]

On the first page of the introduction it states the Thermo Scientific Precision compact oven sterilizes. I can get the model # for you as well today. Mechanical convection is the model type.

Now, go to thermos website and look up their mechanical convection precision compact oven and you see it says “Recommended for: Drying and baking” this is where the confusion comes from. Perhaps old models were good for sterilization and the new ones aren’t, I don’t know which is why I saying the things I’m saying and now asking for a model number.

 

[Olympia Labs]

My boss actually walked in my office while I was typing that last message, I was called into their office yesterday to address my attention and attendance, and my use of the phone/internet has been called out many times.

Basically I’m the realist motherfucker on here and I put it all on the line for this community.

@Olympia Labs what I do for a living is irellevant. I can be a janitor in a lab testing concrete samples and sterilization is just as important to make sure a chemist and civil engineer can make concrete that won’t collapse a bridge or building. Or I could be a secret agent infiltrating bio weapons labs in clandestine locations. Or fuck, I could just be stocking groceries; all of that is irellevant for me or even for you. I don’t care if you wash cars during the day, as long as the gear you make in your moms basement is sterilie and high quality. It goes over much easier when you have a discussion instead of having a fit.

You're right! At the end of the day it's about high quality product for the buyer. Sorry again if it came off as a fit. My initial reply to you was unnecessary but I really didn't mean for the ones after to be offensive. I'm sorry they came off like that.

 

[Olympia Labs]

Now, go to thermos website and look up their mechanical convection precision compact oven and you see it says “Recommended for: Drying and baking” this is where the confusion comes from. Perhaps old models were good for sterilization and the new ones aren’t, I don’t know which is why I saying the things I’m saying and now asking for a model number.

Yes I will have the model # today as soon as I'm back at the lab. I definitely did confirm the oven is good for sterilization on the oven manual and the website before we chose to use it.

 

[desertwarrior]

@Olympia Labs meso may seem like a tough place to open shop, but despite the rough approach the best intentions are at heart. We’ve seen this same song and dance many times from sources who promise sunshine and roses and out of 150 maybe 1 had a happy ending. Imagine the trust issues that can cause.

We just want the best for our members. On that note I’d like to address the fill levels I see in your pics. Not gonna fly here. Also what compound is being filtered in the pics? Why is the oil green? Please say that’s not the tren.

Also I would like to see a picture including the model and brand of the oven. With a nice pic of the outside. I don’t mind dry heat sterilization just curious about the equipment producing your product. In addition why is the hot plate pictured look as though it’s sitting in unfinished wood? Hope that’s not in one of the brewing areas.

 

[fershiz85]

The way you're uploading pics is driving my OCD through the fucking roof. I look at your embedded pictures in their shitty format, then after going through 16 fucking tabs of god knows what at that point, I want to blow my brains out after I put a kitten in the microwave.

I'd feel bad though, because it's the same one you're probably using to sterilize equipment in after your sister cooked her TV dinner in between Judge Judy commercials.

Ask @iceman440 for help - he's the board's computer guy and will promise not to take your girl to pound town.

 

[TX_Hempknight]

Ask @iceman440 for help - he's the board's computer guy and will promise not to take your girl to pound town.

We thinking about the same @iceman440 ? Lmao. More tren, more sisters Iceman?

 

[Olympia Labs]

The way you're uploading pics is driving my OCD through the fucking roof. I look at your embedded pictures in their shitty format, then after going through 16 fucking tabs of god knows what at that point, I want to blow my brains out after I put a kitten in the microwave.

I'd feel bad though, because it's the same one you're probably using to sterilize equipment in after your sister cooked her TV dinner in between Judge Judy commercials.

Ask @iceman440 for help - he's the board's computer guy and will promise not to take your girl to pound town.

Yea, I'm using links to a secure image hosting service mainly to strip any e-tags or other metadata off the picture, for security. I can embed them here.. It's just less secure, on my end.

 

[Olympia Labs]

@Olympia Labs meso may seem like a tough place to open shop, but despite the rough approach the best intentions are at heart. We’ve seen this same song and dance many times from sources who promise sunshine and roses and out of 150 maybe 1 had a happy ending. Imagine the trust issues that can cause.

We just want the best for our members. On that note I’d like to address the fill levels I see in your pics. Not gonna fly here. Also what compound is being filtered in the pics? Why is the oil green? Please say that’s not the tren.

Also I would like to see a picture including the model and brand of the oven. With a nice pic of the outside. I don’t mind dry heat sterilization just curious about the equipment producing your product. In addition why is the hot plate pictured look as though it’s sitting in unfinished wood? Hope that’s not in one of the brewing areas.

I completely understand. I'd want the same as a customer.
That's not the tren lol. I really don't know why the picture is making the oil look green in that picture. I did take that picture with a nikon camera and I'm not sure if the hue setting on the camera was off. I have clearer pics of the oil, the ones taken with the other camera. I'll take more today anyways along with the oven, model, brand.
All brewing is done on marbletop in both rooms. The picture is of where the hot plate was kept when not being used.

 

[BigBaldBeardGuy]

Yea, I'm using links to a secure image hosting service mainly to strip any e-tags or other metadata off the picture, for security. I can embed them here.. It's just less secure, on my end.

Yea, we don’t care so much about that. Just as long as it’s easier for us.

 

[bolder]

“What we got here.. is... failure to communicate”

From everything up to this point all that I have seen is that @Olympia Labs is a home brewer.
He has not yet acquired all the equipment needed to be considered anything other than a home brewer.

Although his home brew methods may work there’s still risks with his setup imo.
Without having the proper items and a clean room throughout the process then I don’t consider this lab to be up to standards from what I’ve seen so far.

Just for starters MAYBE when a clean room is confirmed and an autoclave is in the process I might consider @Olympia Labs to be more serious about his endeavor here.
All that’s missing is a box fan held up by anal beads in a weed tent...

Another thing about the batch numbers... I’d prefer my vials to have that batch number on it! If you send a batch number by email then for you to keep track of what batch a customer has you would have to keep emails! That’s a big No No!

Obviously this “lab” didn’t think things through to the fullest extent and needs a lot of work if he wants to complete with other sources here.
He has nothing more to offer members and what he’s currently offering is under the standards of the existing sources on this board!

As far as you filling bulk orders to one customer I just call bullshit!
This is your first attempt and your experience, or lack of, is showing!