MESO-Rx Sponsor Axle Labs - US Domestic

Axle Labs

Subscriber
MESO-Rx Sponsor
Active hyperlinks to ecommerce-enabled website domains are prohibited.
Hi Meso,

We are Axle Labs.
AXLELABS.NET

We are a domestic lab that provide domestic AAS. The reason we initially began brewing was because we simply didn't trust buying gear off anyone else. Brewing the product ourselves, we ensured that we knew exactly what we were putting in our bodies. I am sure other steroid users would feel the same way. We have sourced locally and on Bohemia market.

Our main focuses are
  1. Providing the most accurately dosed gear on the market
  2. Ensuring all of our customers remain very satisfied. We will always put the customer first.
OILS
For our oils, we offer both MCT and GSO carrier oils for most of our products. We use a triple filtration system through polycap filters, pre-sterilized vials, a sterilized lab, and sterilized lab equipment to ensure there are no contamination issues with any of our products. We do a final stage of blacklight testing even after our whole filtration and vialing process. All our products are overdosed by 5% to account for any possible raw impurities. Although, we do test all our raw batches to ensure continued high purity of all finished products. We offer both 10mL and 20mL versions for many of our injectables, and also fill our vials slightly above the fill line as good measure. We use percentage based calculations for each compound to determine the least amount of solvents needed to ensure the product holds well in the oil while also causing no PIP to the end user.

ORALS
Our orals come in capsule form. We use a V-mixer to ensure proper blending of the active ingredients and filler for each oral product. We allow the V-mixer to blend the ingredients for an hour per product to ensure even disbursement of the active ingredient with the filler. Our orals come in either 30 count or 60 count depending on the product.

T/A
We pride ourselves in our extremely fast T/A. All orders are shipped either same day or next day and arrive within 3-4 business days (and even sooner for most clients). If the order hasn't arrived within the above time frame, you are free to email us for a tracking number which will be provided.

PAYMENT
We only accept Crypto.
We accept BTC, ETH, XMR, USDC, USDT.

TESTING CREDIT
We provide $100 store credit for all approved bloodwork results as long as you've been using our gear for the proper amount of time to have blood levels saturated. This will vary by the ester of testosterone but the time ranges can be found in the bloodwork guidelines on this forum.

$200 store credit for any finished product quantitative testing of our products. We urge everyone to send our products off for testing to Janoshik or any 3rd party lab that is willing to test them. We love seeing blind test results and this testing helps the whole community. We stand by our quality and would love to see more customers doing this.

In summary, we aren't here to sell you a fancy website or a fancy brand. We are here to provide the best quality gear on the market for affordable, competitive prices. We frequently test our products and urge others to do the same. You can expect a new round of testing every couple of weeks.

PRODUCT LIST

Our prices and products can be seen directly on our website: AXLELABS.net
Our product list can also be seen here: Pastebin



ORDERING
Orders can be placed directly via our website (AXLELABS.net) or via email:
support@AXLELABS.net

ORDER FORMAT:

2x Test-E (10mL - 250mg/ml): $50
3x Anavar (20mg): $120
1x HGH Kit (Black tops): $150
Shipping: $10
Total: $330

Payment Method: BTC

Shipping Info:
Name
Street Address, State, Zip Code


Below is our extensive lab testing and stock pictures. I won't be sharing pictures of our actual lab here publicly for OPSEC reasons but am willing to share with mods.

 

Attachments

  • _meso1.jpeg
    _meso1.jpeg
    3 MB · Views: 1,009
  • _meso2.jpeg
    _meso2.jpeg
    3.5 MB · Views: 951
  • _meso3.jpeg
    _meso3.jpeg
    2.8 MB · Views: 891
  • _meso4.jpeg
    _meso4.jpeg
    2.7 MB · Views: 886
  • _meso7.jpeg
    _meso7.jpeg
    3.7 MB · Views: 978
For our oils, we offer both MCT and GSO carrier oils for most of our products. We use a triple filtration system through polycap filters, pre-sterilized vials, a sterilized lab, and sterilized lab equipmen

how is your lab sterilized?
 
how is your lab sterilized?
We use an autoclave to sterilize lab beakers and oil receptacles. We use an alcohol solution to clean all lab surfaces prior to brewing and also run an air filter in the closed brewing and vialing area. Clean gloves and coats worn at all times in the lab. All our vials come pre-sterilized. Our peristaltic pump pipes are cleaned regularly. Our oils go through three levels of filtration as well as a final blacklight test.
 
I’ve been using this guys gear for a long time. You can’t go wrong here. The prices are amazing and the TA is the fastest in the game. order to my door in 3 days total time every time. I will stick with this source as long as he is around.
 
T/A for me was 5 days, similar to others nothing crazy quick or slow. It’s average. I’ll give the product a try an see how goes
 
We use an autoclave to sterilize lab beakers and oil receptacles. We use an alcohol solution to clean all lab surfaces prior to brewing and also run an air filter in the closed brewing and vialing area. Clean gloves and coats worn at all times in the lab. All our vials come pre-sterilized. Our peristaltic pump pipes are cleaned regularly. Our oils go through three levels of filtration as well as a final blacklight test.
Look, without pictures you might as well claim that your sterilization process involves a yeti collecting unicorn tears. Without proof you’re just saying what any other marginally competent salesman for a lab would say. It’s worth zero in terms of establishing any amount of trust.
 
I’ve ordered from Axle Labs twice in the last month. Both times I had instant communication, shipping within 24 hours, and package touchdown within 3 days. The gear was clean and pinned smooth (2 separate orders of 20mL Test C and anavar 50). I’ve only run it for 3 weeks so far but my (early) bloods reflect a good increase from where I sat on TRT before introducing axles test cycle. I will be testing again after waiting the recommended 6-8 weeks. I don’t have much experience ordering from other vendors (I’ve used 2 other “larger” sources but they both took significantly longer to review my payment and ship the goods), but I would recommend Axle just off the excellent customer service received.
 
Used Axle before through a different forum with no issues. The injectable preworkout I had was a pain in the ass to reconstitute but worked like a charm after messing with it. I did have to reconstitute it every time before use but it was some potent stuff. Just placed another small order to see if his shipping process and everything is still GTG.
 
Look, without pictures you might as well claim that your sterilization process involves a yeti collecting unicorn tears. Without proof you’re just saying what any other marginally competent salesman for a lab would say. It’s worth zero in terms of establishing any amount of trust.
Is there some mod system here where we can send lab pictures to? I just would not like to have pictures of our lab out in public.
 
I’ve ordered from Axle Labs twice in the last month. Both times I had instant communication, shipping within 24 hours, and package touchdown within 3 days. The gear was clean and pinned smooth (2 separate orders of 20mL Test C and anavar 50). I’ve only run it for 3 weeks so far but my (early) bloods reflect a good increase from where I sat on TRT before introducing axles test cycle. I will be testing again after waiting the recommended 6-8 weeks. I don’t have much experience ordering from other vendors (I’ve used 2 other “larger” sources but they both took significantly longer to review my payment and ship the goods), but I would recommend Axle just off the excellent customer service received.

Joined Monday at 7:25 PM

Cmon Axel you’ve been here a week and already have new accounts shilling for you. Fuck this source.
 
Is there some mod system here where we can send lab pictures to? I just would not like to have pictures of our lab out in public.
No, welcome to Meso. There is no man behind the curtain who you can provide information to and who will then verify the voracity of your claims. It’s either in the open or it doesn’t happen.

And don’t flatter yourselves, there’s not some crack team of forensic investigators huddling around a computer at some DEA field office just waiting for you to post pictures of beakers and an autoclave.


Your lab equipment isn’t what’s going to get you busted, should that unfortunate day ever come (let’s hope not!). Your risks are the same ones that every lab that’s ever been taken down are: a vial of oil gets broken and leaks in transit, which causes the PO to have to set it aside and investigate it; or one of the guys working for your operation has a nasty breakup and his ex rats you all out; or you have a problem with other substances and you end up getting careless which leads to your demise, etc.

Show your lab, don’t show your lab, it’s your business and ultimately you have to make that call. The testing you’ve done is laudable and very much welcome, so that’s a big plus. If you feel that’s enough to carry you then so be it. But understand that any time you make a claim about your sterilization process or the environment under which you make a product it will not be taken as anything but a work of fiction until proven otherwise.
 
Back
Top