MESO-Rx Sponsor Axle Labs - US Domestic

[Coffezilla]

Don't mean to hijack the thread at all but do you know of a place that will just run your e2? I hate having to pay 200$ plus every time I want to run 1 or 2 panels.

privatemdlabs you can buy any test individually

 

[gucciglenn]

@Axle Labs

Hello, so I injected your Test C - 200mg about 2 days ago and I still have PIP from it. I injected only 75mg using an 27g 1/2 slin pin.

I’ve previously used pharma grade test from a clinic with much larger needles - 25g 1 inch needles and never had PIP, I believe carrier was grapeseed.

Any idea why I’m having pip, especially with a smaller needle. I’ve always injected delts and never had issue.

Batch is #011 with MCT carrier oil.

I’d also like to add that the oil smell like a leathery peppermint type smell or maybe it’s a pine like smell. I thought MCT is odorless.

I then searched “peppermint” in this thread and I saw that you mentioned that’s guaiacol smells like that for a user that was injecting Andadrol.

Any other members have any experience? With the 200mg Test C? I only injected 37.5 units very slowly and I still have PIP from Monday.

I’ll try injecting again Thursday, but would like some reassurance. I really don’t want to inject something toxic. I did look at the test testing results for Batch 011 and I see G wasn’t detected. So, what am I smelling and why is the PIP so bad?

Thanks.

I literally just came to the thread to post about my PIP.

First time ordering from here. Great service and delivery was extremely quick.

With that being said, my first injection was 0.5ML of the Test E 500mg/ml on Wednesday (2 days ago) and my PIP is the worse i’ve ever experienced. Im actually limping today.

I’ve heard test e in the 500mg/ml can have some bad PIP, but this is way worse than I imagined.

I’ve had some decently uncomfortable PIP before, but this is on another level.

I’m hoping my next injection in 2 days (this sunday) will be a different story.

 

[readalot]

With that being said, my first injection was 0.5ML of the Test E 500mg/ml on Wednesday

Why?

Lower concentration and pin every day. Easy.

 

[Coffezilla]

I literally just came to the thread to post about my PIP.

First time ordering from here. Great service and delivery was extremely quick.

With that being said, my first injection was 0.5ML of the Test E 500mg/ml on Wednesday (2 days ago) and my PIP is the worse i’ve ever experienced. Im actually limping today.

I’ve heard test e in the 500mg/ml can have some bad PIP, but this is way worse than I imagined.

I’ve had some decently uncomfortable PIP before, but this is on another level.

I’m hoping my next injection in 2 days (this sunday) will be a different story.

i want to know why youre using 500mg test instead of 250

 

[gucciglenn]

i want to know why youre using 500mg test instead of 250

I figured pinning less fluid would be quicker and less PIP lol

 

[green121]

Don't mean to hijack the thread at all but do you know of a place that will just run your e2? I hate having to pay 200$ plus every time I want to run 1 or 2 panels.

Ultalabs has singular sensitive and ultrasenseative tests

 

[BigDadd7]

I literally just came to the thread to post about my PIP.

First time ordering from here. Great service and delivery was extremely quick.

With that being said, my first injection was 0.5ML of the Test E 500mg/ml on Wednesday (2 days ago) and my PIP is the worse i’ve ever experienced. Im actually limping today.

I’ve heard test e in the 500mg/ml can have some bad PIP, but this is way worse than I imagined.

I’ve had some decently uncomfortable PIP before, but this is on another level.

I’m hoping my next injection in 2 days (this sunday) will be a different story.

You have to mix that in the barrel with something else. You're going to be hurting for days.

 

[gucciglenn]

You have to mix that in the barrel with something else. You're going to be hurting for days.

fuck… that’s not what i wanted to hear

Is this some common knowledge I just wasn’t aware of? That Test E 500 should only be used when mixing?

 

[green121]

fuck… that’s not what i wanted to hear

Is this some common knowledge I just wasn’t aware of? That Test E 500 should only be used when mixing?

A bit that's alota test. Is this your first cycle?

 

[glpfun]

fuck… that’s not what i wanted to hear

Is this some common knowledge I just wasn’t aware of? That Test E 500 should only be used when mixing?

its common enough that searching for it in this thread would tell you the pip is pretty unbearable, but don’t always know to check for it. I only found out that pip is bad at high concentrations by reading other people’s experiences

 

[JackHoffman]

Why are you injecting so much test with only 1/2” needle? Is it actually getting into your muscle because with a 1” you are not going to risk it going into your fat. Is there a huge ball of oil visible from the injection? I don’t have experience trying 500mg/mL but heard it isn’t usually worth it and to stick with 200 or 250mg/mL. I forget why but it has something to do with the oil, either lower quality or a thinner type of oil which could make it more pipped. Also, I always found MCT to be pippy so I only get GSO now. So those three things could all be tried. I’ve been using the 250 GSO test E and haven’t had any issues. I’ve mostly been injecting only 125-250 at a time but I think I was doing more at one point with this stuff as well.

 

[ve79]

Why are you injecting so much test with only 1/2” needle? Is it actually getting into your muscle because with a 1” you are not going to risk it going into your fat. Is there a huge ball of oil visible from the injection? I don’t have experience trying 500mg/mL but heard it isn’t usually worth it and to stick with 200 or 250mg/mL. I forget why but it has something to do with the oil, either lower quality or a thinner type of oil which could make it more pipped. Also, I always found MCT to be pippy so I only get GSO now. So those three things could all be tried. I’ve been using the 250 GSO test E and haven’t had any issues. I’ve mostly been injecting only 125-250 at a time but I think I was doing more at one point with this stuff as well.

Half inch is fine but using 500 test can sting a bit all at once . It's better to spread it out anyways for a more consistency through out the week . What will help with easier injection is to use a bigger gage needle to your comfort

 

[JackHoffman]

Why are you injecting so much test with only 1/2” needle? Is it actually getting into your muscle because with a 1” you are not going to risk it going into your fat. Is there a huge ball of oil visible from the injection? I don’t have experience trying 500mg/mL but heard it isn’t usually worth it and to stick with 200 or 250mg/mL. I forget why but it has something to do with the oil, either lower quality or a thinner type of oil which could make it more pipped. Also, I always found MCT to be pippy so I only get GSO now. So those three things could all be tried. I’ve been using the 250 GSO test E and haven’t had any issues. I’ve mostly been injecting only 125-250 at a time but I think I was doing more at one point with this stuff as well.

Other thing I thought about was injecting your quads. You said you were limping. If injecting that much test I think glutes is a much better way to go.

 

[Ateam2023]

Other thing I thought about was injecting your quads. You said you were limping. If injecting that much test I think glutes is a much better way to go.

Also the VG can handle a volume of cc's and its easy to hit,,,

 

[Axle Labs]

Bloodwork, all axles stuff. 550ish test e, 400 primo, 12.5 aromasin 3x week, 50mg anavar, 4iu gh on training days. This is after a 20 week cut.
Will be bulking soon, gonna jump up to 750 test, 600ish primo, 8-10iu gh and ill see where that puts me at.

Thanks for sharing! Email us for bloodwork credit.

 

[gucciglenn]

A bit that's alota test. Is this your first cycle?

id have to disagree but maybe im wrong ‍

250mg twice a week doesn’t seem like a lot.

 

[gucciglenn]

Other thing I thought about was injecting your quads. You said you were limping. If injecting that much test I think glutes is a much better way to go.

Im considering this now.

I’ve always used my quads, so im not too thrilled too switch, but I may have to try it.

 

[Testogainer]

@Axle Labs do you have testing for patch 012? Couldn’t find it on the website

 

[Axle Labs]

@Axle Labs do you have testing for patch 012? Couldn’t find it on the website

It’s coming soon. Same raws being used as last tested batch but it’s being sent off. Stay tuned for results.

 

[hahahaINC]

Don't mean to hijack the thread at all but do you know of a place that will just run your e2? I hate having to pay 200$ plus every time I want to run 1 or 2 panels.

I use Marek Health Diagnostics. They let you build your own labs. You have the option to choose the normal or high accuracy LC-MS tests as well.