BrewPorn

[LordSamuilo]

All PPLView attachment 84816View attachment 84817View attachment 84818View attachment 84819View attachment 84820

40mg cialis my sinuses would freaking explode lol , tren looks good asf ! Mct ?

 

[LordSamuilo]

You guys are bringing some good brewporn today . Here's something I whipped up last night , nothing amazing just was messing around with some solvent ratios to see what i could get to hold.

Gonna waste a few grams of var today and see if i can get the elusive 50mg/ml to hold ... got a recipe that is supposedly gtg , but that doesnt nessisarily mean im a good enough brewer to make it work

 

[mghoward74]

How much heat are you using on that tren? What carrier oil?

Personally I don' like my tren that dark. There's is a study proving that too much heat will reduce the effectiveness of tren.

Your oral say tabs. What kind off press did you use?

Respecfully

 

[saucier]

You guys are bringing some good brewporn today . Here's something I whipped up last night , nothing amazing just was messing around with some solvent ratios to see what i could get to hold.View attachment 84821

Gonna waste a few grams of var today and see if i can get the elusive 50mg/ml to hold ... got a recipe that is supposedly gtg , but that doesnt nessisarily mean im a good enough brewer to make it work

What is the recipe you are going to try for the var?

 

[saucier]

Nice stuff getting posted here. Going to brew some tren ace this weekend and will post pics when done.

 

[LordSamuilo]

Personally I don' like my tren that dark. There's is a study proving that too much heat will reduce the effectiveness of tren.

I agree dont really care for super dark tren either but ive had a couple batches of raws where the second i added bb to the raws it went from the normal looking tren color to a rusty orange with zero heat ? What the heck is that , just oxidized raws or maybe something in the manufacturing process that causes it ? Fwiw they were still effective but its just weird how one batch from the next can react so differently .

 

[LordSamuilo]

What is the recipe you are going to try for the var?

Sorry brotha , if it works that one's staying up in my back pocket ...

 

[mghoward74]

I agree dont really care for super dark tren either but ive had a couple batches of raws where the second i added bb to the raws it went from the normal looking tren color to a rusty orange with zero heat ? What the heck is that , just oxidized raws or maybe something in the manufacturing process that causes it ? Fwiw they were still effective but its just weird how one batch from the next can react so differently .

I'm going to need your TNE/TRNE recipes

I recommend these compounds for guys I know who compete and are worried about testing

 

[-vegeta-]

40mg cialis my sinuses would freaking explode lol , tren looks good asf ! Mct ?

nope gso

 

[LordSamuilo]

I'm going to need your TNE/TRNE recipes

Okay okay ill give you my super duper top secret tne200/TrNe200 blend recipe
.001% ba
60% bb
In a 110% guaiacol carrier

I know the math seems alittle strange , but just trust me on this its 100% legit !

 

[LordSamuilo]

But in all seriousness the tne100 up above was 1/19% 10%G in eo for anyone that is interested, just forgot to add it to the post... not hard , and not sure but id almost guarantee you could do 50tne/50TrNe with the same recipe maybe slightly more. Just add everything incrementally and control your heat , dont just throw everything in the beaker any slam it on the heat . I think that makes a big difference with bases , but thats just my opinion .

 

[Thegreek]

I think heat is the answer to most of the hard to turn into solution compounds. When I made the frog juice I had all my solvents At 200 or so and just dropped all 4 compounds in one after the other and id say 90 percent went into solution almost immediately with very little stirring. Used my glass stir rod to break up the last little bit and kept it moving for 5 10 minutes as the temp slowly came down. I really think the answer to some of the brewing problems is leaving carrier oil till the end but making sure solvents are up to temp then add compound (s). Could save BA till the end since it’s usually such a small amount. One step further could also be making sure carrier oil is warm to hot so the temp fluctuation is minor. Think this process would help to slightly lower solvent ratios but keep the compounds at same level possibly higher. Obviously there is a common sense limit on what would work but I think the guys who are willing to play around could really get some hard brew compounds to do what they want with more heat. One last thing too would be to store finished compounds in a normally warmer area. If you had an area that was generally in the 70s or better I don’t think you would have them crash as easily as if it was in the 50s and 60s.

 

[LordSamuilo]

I think heat is the answer to most of the hard to turn into solution compounds. When I made the frog juice I had all my solvents At 200 or so and just dropped all 4 compounds in one after the other and id say 90 percent went into solution almost immediately with very little stirring. Used my glass stir rod to break up the last little bit and kept it moving for 5 10 minutes as the temp slowly came down. I really think the answer to some of the brewing problems is leaving carrier oil till the end but making sure solvents are up to temp then add compound (s). Could save BA till the end since it’s usually such a small amount. One step further could also be making sure carrier oil is warm to hot so the temp fluctuation is minor. Think this process would help to slightly lower solvent ratios but keep the compounds at same level possibly higher. Obviously there is a common sense limit on what would work but I think the guys who are willing to play around could really get some hard brew compounds to do what they want with more heat. One last thing too would be to store finished compounds in a normally warmer area. If you had an area that was generally in the 70s or better I don’t think you would have them crash as easily as if it was in the 50s and 60s.

I agree with this pretty much 100% , my steps are slightly different but same principle .

And with the compounds crashing issue , thats why i stopped making regular compounds w/ super low solvents . Where i live the winters are cold as hell , and some of the low solvent stuff i made in the summer i have still laying around crashes constantly everytime we get a particularly cold night. 1/19% is basically my go to now because it still pins smooth and can handle the temp changes.

 

[Thegreek]

I agree with this pretty much 100% , my steps are slightly different but same principle .

And with the compounds crashing issue , thats why i stopped making regular compounds w/ super low solvents . Where i live the winters are cold as hell , and some of the low solvent stuff i made in the summer i have still laying around crashes constantly everytime we get a particularly cold night. 1/19% is basically my go to now because it still pins smooth and can handle the temp changes.

Guys like @XKawN and maybe @XmadXscientist I think have a general rule of 1/18 which is fine but just because it works doesn’t mean it’s the only way. My cyp is at 1/18 thanks to @XKawN when I first started brewing and it’s perfect. Then I made prop at 1/18 and wanted to saw my arm off. Thanks to @colossus25 (where you at buddy haven’t seen you in awhile) i then brewed it at 1/10 and you’d think you were just pinning oil. There is a lot of room for experimentation if you have the time and money. My point though was less shit the better and heat is what I think could help all that. Again though there is so much more to this and I’m simplifying a lot. I know you have some badass brews under your belt but some new guys following online recipes I think are in trouble. Honestly if the recipe doesn’t come from here I don’t think I would use it. The online shit is absurd. 3-5 percent BA. GTFO.

 

[Slammich]

Okay okay ill give you my super duper top secret tne200/TrNe200 blend recipe
.001% ba
60% bb
In a 110% guaiacol carrier

I know the math seems alittle strange , but just trust me on this its 100% legit !

You know it will crash if you don't add 2 drops of dragon spit and a dash of unicorn piss.

 

[Thegreek]

You know it will crash if you don't add 2 drops of dragon spit and a dash of unicorn piss.

Have you guys not read any of what I just posted. More is not always better. In this case less ingredients are the way to go. One teaspoon leprechaun cum and no crashing. It’s also magically delicious too.

 

[LordSamuilo]

Have you guys not read any of what I just posted. More is not always better. In this case less ingredients are the way to go. One teaspoon leprechaun cum and no crashing. It’s also magically delicious too.

I cant use leprechaun cum im allergic , dont ask me how I found that one out , its a long story ... lets just say he was very convincing, and long story short I may or may not have just got molested by a midget in a green suit

 

[Thegreek]

I cant use leprechaun cum im allergic , dont ask me how I found that one out , its a long story ... lets just say he was very convincing, and long story short I may or may not have got molested by a midget in a green suit

Happens to the best of us.

 

[LordSamuilo]

Happens to the best of us.

Hahaha indeed ..

 

[-vegeta-]

How much heat are you using on that tren? What carrier oil?

Personally I don' like my tren that dark. There's is a study proving that too much heat will reduce the effectiveness of tren.

Your oral say tabs. What kind off press did you use?

Respecfully

the darkness is from the raws not the heat. it was that colour from the start