BrewPorn

[Thegreek]

I forgot where I saw it but someone posted a pic of a spec sheet on filters and according to the sheet PES filters aren’t compatible with BA/BB. Interesting story. I have filtered a few small batches and they start out filtering just fine. Around 20ml it starts to slow down by 50 it’s almost nonexistent. Thought it was me. Low and behold they are PES filters. Anyone ever use FOXX autofil PES bottle top filters and come across this problem. I’m going to get different ones because this has to be the problem. No way should a 250ml filter take a shit by 50ml. What filters are you guys using.

 

[AnTabolic73]

I forgot where I saw it but someone posted a pic of a spec sheet on filters and according to the sheet PES filters aren’t compatible with BA/BB. Interesting story. I have filtered a few small batches and they start out filtering just fine. Around 20ml it starts to slow down by 50 it’s almost nonexistent. Thought it was me. Low and behold they are PES filters. Anyone ever use FOXX autofil PES bottle top filters and come across this problem. I’m going to get different ones because this has to be the problem. No way should a 250ml filter take a shit by 50ml. What filters are you guys using.

I accidently (didnt realize i grabbed the wrong one) filtered about 100ml of test e through a autofil pes filter. It filtered so quickly. I pinned the test e and got major pip and a lump. I dont know if it was because i overdosed it by 10% so it was basically 333mg/ml or the pes. I refiltered through nylon filter. No more pip, but it could also be im adapting to the higher concentration.

Ive used the red nalgene which is nylon, and the milliopore which is pvdf i believe. They both work fine for our application.

 

[AnTabolic73]

Just got this off ebay. Works just fine. Makes stirring brews so much easier. $60. I doubt itll last long. But hopefully i can get a few brews out it. Made 80ml of dhb at 125mg/ml. 2/20 ba/bb 33% eo 45%gso. Should hold. I was gonna try for 200mg/ml, but chickened out.
Made some oral superdrol at 10mg/ml. Used a gram and about 100ml of everclear. It dissolved really quickly. It should hold too.

 

[Thegreek]

I accidently (didnt realize i grabbed the wrong one) filtered about 100ml of test e through a autofil pes filter. It filtered so quickly. I pinned the test e and got major pip and a lump. I dont know if it was because i overdosed it by 10% so it was basically 333mg/ml or the pes. I refiltered through nylon filter. No more pip, but it could also be im adapting to the higher concentration.

Ive used the red nalgene which is nylon, and the milliopore which is pvdf i believe. They both work fine for our application.

Honestly I think I’m going to give up trying to bottle top filter. Med lab is always sold out because of you assholes lol. I’m not doing crazy big brews. My first time syringe filtering wasn’t bad and it was by hand no caulking gun. I made a bunch of shit recently and never filtered it. Have like 300ml of NPP test e test cyp mast p tren e. Going to get a couple of syringe filters off amazon and just get it over with.

 

[AnTabolic73]

Honestly I think I’m going to give up trying to bottle top filter. Med lab is always sold out because of you assholes lol. I’m not doing crazy big brews. My first time syringe filtering wasn’t bad and it was by hand no caulking gun. I made a bunch of shit recently and never filtered it. Have like 300ml of NPP test e test cyp mast p tren e. Going to get a couple of syringe filters off amazon and just get it over with.

If you keep the brews small, thats the way to go.

 

[TideGear]

Honestly I think I’m going to give up trying to bottle top filter. Med lab is always sold out because of you assholes lol. I’m not doing crazy big brews. My first time syringe filtering wasn’t bad and it was by hand no caulking gun. I made a bunch of shit recently and never filtered it. Have like 300ml of NPP test e test cyp mast p tren e. Going to get a couple of syringe filters off amazon and just get it over with.

Amazon has bottle top filters

 

[Thegreek]

I’m having a brain fart and need some help. If you brew 50ml of a compound at 200mg/ml with 1/10 BA/BB and it crashes so you add more BB what’s the math to figure out what the new mg/ml is. For example for the above brew for every ml of BB I add what happens to the mg/ml number.

 

[daylight driller]

I’m having a brain fart and need some help. If you brew 50ml of a compound at 200mg/ml with 1/10 BA/BB and it crashes so you add more BB what’s the math to figure out what the new mg/ml is. For example for the above brew for every ml of BB I add what happens to the mg/ml number.

I may be wrong bit if 50ml=100% 1ml=2%. If you add 1 ml it would vecome roughly 196mg

 

[mghoward74]

I’m having a brain fart and need some help. If you brew 50ml of a compound at 200mg/ml with 1/10 BA/BB and it crashes so you add more BB what’s the math to figure out what the new mg/ml is. For example for the above brew for every ml of BB I add what happens to the mg/ml number.

Reheat it before you add any more bb. Then wait another 24-36 hours, depending on the weather/climate area.

It's simple math really. Just decide on how much you want and times it by the mg per dose. 50 ml × 100mg (example). Then do the % for bb....15% off the total volume.

The more bb/ba you add, will reduce to overall mg per ml/cc
Think of it like pouring milk into a bowl of cereal.

 

[Iron Vett]

I’m having a brain fart and need some help. If you brew 50ml of a compound at 200mg/ml with 1/10 BA/BB and it crashes so you add more BB what’s the math to figure out what the new mg/ml is. For example for the above brew for every ml of BB I add what happens to the mg/ml number.

The 10,000 grams of compound divided by the total volume after adding the additional BB

Edit: mg/ml will get smaller with any solvent or carrier added

 

[Thegreek]

Reheat it before you add any more bb. Then wait another 24-36 hours, depending on the weather/climate area.

It's simple math really. Just decide on how much you want and times it by the mg per dose. 50 ml × 100mg (example). Then do the % for bb....15% off the total volume.

The more bb/ba you add, will reduce to overall mg per ml/cc
Think of it like pouring milk into a bowl of cereal.

Thanks bro but that part I got. I was having a stupid brain fart and @Iron Vett just answered it in the previous post. That’s the formula I was looking for and could figure out. Rough day.

 

[Thegreek]

The 10,000 grams of compound divided by the total volume after adding the additional BB

Edit: mg/ml will get smaller with any solvent or carrier added

Thanks bro that’s what I was looking for. Oh and by the way I’m gonna borrow (steal) your idea on the compound mixer. Fuck spending 50-60 bucks on a tumbler when I can make one for 10. I’m gonna make a different type of attachment for the container though. I’ll post pics when done. Thanks for the answer and the idea.

 

[TRT]

Capping machine and a compound mixer. You'll be glad you've got them once you start capping this way.

View attachment 88552

Edit: This is my compound mixer

The motor is a 110 volt 60 rpm motor I found on amazon for $10. The popsicle sticks are taped in place to make the powder tumble. Works good

I don't view this thread often cause the picture won't load but they ALL have this morning and I'm having a field day.

Damn...that shit looks mad familiar. Lol blast from the past right there.

 

[Iron Vett]

I don't view this thread often cause the picture won't load but they ALL have this morning and I'm having a field day.

Damn...that shit looks mad familiar. Lol blast from the past right there.

You were definately my inspiration when making that dry compound mixer. Thanks again for describing your process bro

 

[mghoward74]

You were definately my inspiration when making that dry compound mixer. Thanks again for describing your process bro

What post # is this compound mixer?

I need to make one

 

[Iron Vett]

What post # is this compound mixer?

I need to make one

BrewPorn

Edit: The motor is a 110 volt 60 rpm motor I found on amazon for $10. The popsicle sticks are taped in place to make thepowder tumble. Works good

 

[Thegreek]

What post # is this compound mixer?

I need to make one

Brewporn number 803

 

[Thegreek]

@TRT
Should have patented that mixer. Ordering my motor today. Will post pics when I’m done with it.

 

[TRT]

@TRT
Should have patented that mixer. Ordering my motor today. Will post pics when I’m done with it.

Originally I just threw the sticks in but now I glue them to the inside at and angle to push them towards the ends so the powder over laps itself in two way.

 

[Iron Vett]

Originally I just threw the sticks in but now I glue them to the inside at and angle to push them towards the ends so the powder over laps itself in two way.

The sticks at an angle is a good idea. With them straight, I have to pick it up and dump the powder to the end and let it roll itself back to the middle.