MESO-Rx Sponsor GenericAsia - International & US Domestic

[AlexDavis43]

your worried too much of attacking GA at the moment and nothing else.

you get the procedures if sterilization to know and some photos as well of the equipments don’t worry. As said safety is our priority so I have to priority the safety of the facility before I can provide you some pictures, right?

If a customer sends in a sample for sterility testing and it passes, will they still require details of the process and OPSEC photos?

 

[UncleBuns]

So you will not be sharing anything about your process?

I'm not opposed to you grilling the source but he just said that he will get photos and go into detail on the processes. Give him a little time to produce that info. He said that he would and if he doesn't within a reasonable amount of time then that's definitely a red flag.

I'm a fan of this source but I'm not opposed to any source being grilled and pressured for information. You are also wrong about some of your claims about searching this thread. He was grilled hard at first and met many of our demands and expectations. I do think pressuring for the information on the facility and sterility is good as well.

 

[ivandragovich]

I'm not opposed to you grilling the source but he just said that he will get photos and go into detail on the processes. Give him a little time to produce that info. He said that he would and if he doesn't within a reasonable amount of time then that's definitely a red flag.

I'm a fan of this source but I'm not opposed to any source being grilled and pressured for information. You are also wrong about some of your claims about searching this thread. He was grilled hard at first and met many of our demands and expectations. I do think pressuring for the information on the facility and sterility is good as well.

Fair enough. I’ll back off a bit.

 

[GenericAsia]

Okay great, what about sterilization and the process? Lab equipment? Etc.

as I wrote above, you get the sterilization process and pictures of the equipments very soon. safety first, remember? can’t have the chemistry guys doing the production while taking photos lol

 

[UncleBuns]

Fair enough. I’ll back off a bit.

All good man. I have no interest in trying to protect certain sources or play favoritism or anything. I'm not opposed to you wanting more information from GA. I actually think some of the things you're asking for are a good idea.

I do notice that I and others will grill sources hard when they first show up, but then we tend to back off if they pass the initial vetting. Maybe the holes in the initial vetting that you were pointing out were forgotten. Nothing wrong with bringing it up now.

 

[ivandragovich]

as I wrote above, you get the sterilization process and pictures of the equipments very soon. safety first, remember? can’t have the chemistry guys doing the production while taking photos lol

Okay that’s fair. Appreciate your response and willingness towards sharing information. Do not mean to be hostile. Patiently awaiting those details.

 

[Grey Spartan]

If a customer sends in a sample for sterility testing and it passes, will they still require details of the process and OPSEC photos?

So I'm confused. Did someone get un-sterile gear? Did someone report bad gear or a security breach? I looked through another source that has over 2k pages and did not see any pics of the "sterilization process". Is this a new thing to show pics?

I'm not against any of this info but was wondering why its not applied to every source?

 

[GenericAsia]

I'm not opposed to you grilling the source but he just said that he will get photos and go into detail on the processes. Give him a little time to produce that info. He said that he would and if he doesn't within a reasonable amount of time then that's definitely a red flag.

I'm a fan of this source but I'm not opposed to any source being grilled and pressured for information. You are also wrong about some of your claims about searching this thread. He was grilled hard at first and met many of our demands and expectations. I do think pressuring for the information on the facility and sterility is good as well.

hi uncle thank you for confirming it, seems like someone didn’t do their homework or checked the pages through as he mention. in the beginning i was actually slaughtered in here and learned in the hard way lol

i have been very reasonable and very fair for this community and provided everything they wanted to see, now its the sterilization and the equipments and that is not a problem at all and will be shared.

 

[Obeast88]

your worried too much of attacking GA at the moment and nothing else.

you get the procedures if sterilization to know and some photos as well of the equipments don’t worry. As said safety is our priority so I have to priority the safety of the facility before I can provide you some pictures, right?

I see you were def not truly vetted when started here. This is literally how we used to bet any and every source before anything was ever ordered. Just these days there are a lot of kids who shouldn’t even be taking them and have no knowledge of them either. So you come with great prices and quick delivery and they jumped all over it. So you got good feedback from customers. This the influx of business bc products delivered fast cheap and tested for doseage and product that was supposedly in vial. All of this is great. He is not attacking you personally. Just looking out for the community. Those test are great but what he is asking for is the process on which all of it gets done and packaged safely without contamination. Which hasn’t really been tested for such as heavy metals and others inside the vials. Thus the information of sterilization and production comes into play. Harm reduction board. Not an attack on you but an eye opener for new comers for what they should be concerned with also before they buy just bc of cheap prices and fast TA.
Personally I am happy with your services of what I have received so far and the gear is smooth as can be for pinning to me and it is what it says it is. But I didn’t read your entire thread unlike @ivandragovich just skimmed all and decided there were no incidents or reall problematic areas so far and I gave you a shot. I should have read through the vetting more and that’s my fault. Even though I’m happy with all I’ve gotten from you and it’s been a good bit lately lol we still as a community should have vetted you way more intensively just to make sure you were as good as the services you provide. Not an attack at all GA so don’t take it this way brother. Keep up with the good work.

 

[ivandragovich]

So I'm confused. Did someone get un-sterile gear? Did someone report bad gear or a security breach? I looked through another source that has over 2k pages and did not see any pics of the "sterilization process". Is this a new thing to show pics?

I'm not against any of this info but was wondering why its not applied to every source?

In my opinion it should be applied to every source. It’s not a problem until someone does get hurt. However that’s just my opinion and I’m a nobody. I’m going to shut up now and let the source and others who have more experience and knowledge take lead on things.

 

[GenericAsia]

So I'm confused. Did someone get un-sterile gear? Did someone report bad gear or a security breach? I looked through another source that has over 2k pages and did not see any pics of the "sterilization process". Is this a new thing to show pics?

I'm not against any of this info but was wondering why its not applied to every source?

FINALLY!! some one see the pattern here now.. NOT an single product have been reported as bad gear nor bad lab result, nothing is un-sterile either.. coming from a guy who never ordered at me as well

 

[readalot]

in the beginning i was actually slaughtered in here and learned in the hard way lol

So what page exactly did you finally address skank's question/comment on the viagra shortchange? 10 pages in and still haven't found it.

Search results

thinksteroids.com

 

[GenericAsia]

I see you were def not truly vetted when started here. This is literally how we used to bet any and every source before anything was ever ordered. Just these days there are a lot of kids who shouldn’t even be taking them and have no knowledge of them either. So you come with great prices and quick delivery and they jumped all over it. So you got good feedback from customers. This the influx of business bc products delivered fast cheap and tested for doseage and product that was supposedly in vial. All of this is great. He is not attacking you personally. Just looking out for the community. Those test are great but what he is asking for is the process on which all of it gets done and packaged safely without contamination. Which hasn’t really been tested for such as heavy metals and others inside the vials. Thus the information of sterilization and production comes into play. Harm reduction board. Not an attack on you but an eye opener for new comers for what they should be concerned with also before they buy just bc of cheap prices and fast TA.
Personally I am happy with your services of what I have received so far and the gear is smooth as can be for pinning to me and it is what it says it is. But I didn’t read your entire thread unlike @ivandragovich just skimmed all and decided there were no incidents or reall problematic areas so far and I gave you a shot. I should have read through the vetting more and that’s my fault. Even though I’m happy with all I’ve gotten from you and it’s been a good bit lately lol we still as a community should have vetted you way more intensively just to make sure you were as good as the services you provide. Not an attack at all GA so don’t take it this way brother. Keep up with the good work

look it through again mate. there was an period where it was going crazy.

 

[GenericAsia]

So what page exactly did you finally address skank's question/comment on the viagra shortchange? 10 pages in and still haven't found it.

Search results

thinksteroids.com

if you followed the progress of how I changed the business model, then you would know.

the viagra was not being sold afterwards that and made as freebies. those was the time where I only produced ampoules and 10tabs in blisters, BEFORE I started to produce the 10ml vials and the 100tabs bags.

if you check the pages you can see I gave a lot of my blistered 10tabs away as freebies.

 

[ivandragovich]

FINALLY!! some one see the pattern here now.. NOT an single product have been reported as bad gear nor bad lab result, nothing is un-sterile either.. coming from a guy who never ordered at me as well

Hmmm… how do you know I never ordered from you?…

 

[readalot]

if you followed the progress of how I changed the business model, then you would know.

Thanks. So you actually never took a minute and said "thanks skank, I messed up."

It's so simple. But you didn't own it with a simple mention to skank.

Understood. I appreciate you saving me reading last 170 pages. A pattern of saving face is mighty dicey in the drug dealing business.

 

[ivandragovich]

look it through again mate. there was an period where it was going crazy.

Thanks. So you actually never took a minute and said "thanks skank, I messed up."

It's like so simple. But you didn't own it with a simple mention to skank.

Understood. I appreciate you saving me reading last 170 pages. A pattern of saving face is mighty dicey in the drug dealing business.

Glad someone else is starting to see the pattern I saw. Yet I didn’t do my research and I’m being attacked.

 

[carbon adams]

I'm not opposed to any source being grilled and pressured for information.. I do think pressuring for the information on the facility and sterility is good as well.

Someone should do this with Opti and his new gso line. He didn’t give any details at all! He wouldn’t even answer if it was made domestically or in a factory

I tried asking for very small details (not even something that would risk their ospec like a picture )

I asked if it was made domestically, are the vials and stoppers pre sterilized? what is the ba and bb.

Simple questions like that. but I was told by other members to fuck off and either buy it or shut the fuck up. And Opti never answered any of the simple questions.

Why is Opti given the golden “pass” ? Does he own meso or something ? Is he Millard ? (Obviously just a joke)


I mean obviously he doesn’t own meso and isn’t Millard , but how can he get such a pass ?

I don’t even think Millard would get such a pass if he decided to be a vendor one day.

What gives ?

 

[readalot]

I’m being attacked

Don't worry about that in the slightest man. Usually a sign you are doing something right. Appreciate your dedication and work here.

 

[ivandragovich]

Someone should do this with Opti and his new gso line. He didn’t give any details at all! He wouldn’t even answer if it was made domestically or in a factory

I tried asking for very small details (not even something that would risk their ospec like a picture )

I asked if it was made domestically, are the vials and stoppers pre sterilized? what is the ba and bb.

Simple questions like that. but I was told by other members to fuck off and either buy it or shut the fuck up. And Opti never answered any of the simple questions.

Why is Opti given the golden “pass” ? Does he own meso or something ? Is he Millard ? (Obviously just a joke)


I mean obviously he doesn’t own meso and isn’t Millard , but how can he get such a pass ?

I don’t even think Millard would get such a pass if he decided to be a vendor one day.

What gives ?

Look into Stan as well. There are a lot of issues and holes on this board.