Grayscale Compounding [U.S. Domestic]

Might get some orders after hplc tests come back. Until then, no idea why anyone would order from you when we have sources here with that plus much more. You posting your customers bloodwork proves little.
 
What DNM’s were you on?

I would like to know this also I've been on almost every major dnm since silk road 1.0 and I've been following quite a few of the big gear guys on the dnm's for a while. Do you use the same handle? Or do you have a different one?

I would have no issue telling you if we were past or current associates of any other UGL.

What about these questions and I will get back to my questions after I eat
 
By all means - I wasn't trying to be a dick in my earlier posts. This type of "barbaric" hazing (as some other forums call it) is necessary. I assure, if you pass the vetting process you will be successful here. Take Pristine for example.

I do have a couple questions/suggestions.
  • Why did you keep your root access to your wordpress site under the default directory? Change that. Also, did you make sure to chmod all crucial files?
  • Why are you using namecheap?
    • Please keep in mind ANY domain registar that has affiliation with the US falls under US jurisdiction.
  • Please keep in mind, the UK has been known to work with the US.
This was a 2 minute analysis in not indepth by any means.
 
Our filler is sodium bicarbonate, commonly known as baking soda. Baking soda is one of the finest powders around that is harmless and readily available. Using a mortar and pestle on it would do nothing. We pulverize the active ingredient to match the texture of the sodium bicarbonate.



We're currently using size #3 capsules. Our capsule set and tamper fills 400 capsules per batch. For this example, we'll use our 10mg variant of anavar. We take 4 grams of anavar raws, pulverize it, adding 500mg slowly while triturating, and tumble it with 82 grams of sodium bicarbonate. Each capsule holds 215mg of mixed anavar/sodium bicarbonate powder after tamping. This has been verified multiple times by measuring the final powder volume. For anavar, our equation is 400/y = x (y = the necessary quantity of raw powder in grams) (x = the desired final dosage per capsule in grams). To find the amount of filler necessary to reach our desired final dosage, we use this equation: f = (400*0.215g) - y (f = the necessary quantity of filler per batch). These same equations apply to dianabol, with a slight adjustment to the amount of powder the capsules hold.
1) actually using the mortar and pestle with filler will mix your batch better. Pharmacies have proven this.

Also how do you know they are the same consistency without sieving?

So now we know when you are measuring out your batches you do not take in effect of granule white and density weight of the raw.

So to speak 10grams of var takes up less room than 10grams of dbol. Therefor using the same calculation that u state you do will throw your pills all out of whack. So you are not dosing them correctly.
Math and weight is absolute and you seem to be mixing like someone wanting to make a quick batch for personal use.

If I understood you wrong explain in laymen terms.

Like how much baking soda weight will fit in a #3 capsule after tamped and how much raw var will fit in a #3 capsule tamped? Then what equation are you using to make an exact dose.

Simply putting 4g of active will return an underdosed cap.

I’m up for a debate
 
By all means - I wasn't trying to be a dick in my earlier posts. This type of "barbaric" hazing (as some other forums call it) is necessary. I assure, if you pass the vetting process you will be successful here. Take Pristine for example.

I do have a couple questions/suggestions.
  • Why did you keep your root access to your wordpress site under the default directory? Change that. Also, did you make sure to chmod all crucial files?
  • Why are you using namecheap?
    • Please keep in mind ANY domain registar that has affiliation with the US falls under US jurisdiction.
  • Please keep in mind, the UK has been known to work with the US.
This was a 2 minute analysis in not indepth by any means.

You didn't come off that way; I understand the necessity of the scrutiny. To answer your questions:

Admin root access wasn't changed primarily because the site automatically detects and blocks brute force attempts. Both login credentials are quite robust. With that being said, you're correct. It is best practice to change the default directory. Yes, the file system is adjusted for proper file permissions. 660 for the config (chmod -R a+rwx,u-x,g-x,o-rwx), 664 for other files (chmod -R a+rwx,u-x,g-x,o-wx), etc. Critical files have been moved outside any public folders.

Namecheap has surprisingly good performance for being a U.K. webhost. It is far more likely that the site be flagged and removed for breaking Namecheap's ToS than seized by a governing LE agency. It's important to understand the sheer amount of resources it would take for this to occur. In any case, were migrating to an offshore web host this month.
 
1) actually using the mortar and pestle with filler will mix your batch better. Pharmacies have proven this.

Also how do you know they are the same consistency without sieving?

So now we know when you are measuring out your batches you do not take in effect of granule white and density weight of the raw.

So to speak 10grams of var takes up less room than 10grams of dbol. Therefor using the same calculation that u state you do will throw your pills all out of whack. So you are not dosing them correctly.
Math and weight is absolute and you seem to be mixing like someone wanting to make a quick batch for personal use.

If I understood you wrong explain in laymen terms.

Like how much baking soda weight will fit in a #3 capsule after tamped and how much raw var will fit in a #3 capsule tamped? Then what equation are you using to make an exact dose.

Simply putting 4g of active will return an underdosed cap.

I’m up for a debate

In my previous post I state that we take each raw's density into account. Math and weight are absolute, that's correct, which is why we measure the final powder weight of an accurately dosed pill after tamping to determine the formula for each raw.

To explain further, we take 10mg of pulverized anavar, tumble it until the mix is homogeneous with 100mg of filler, and then add it to a single cap. We then add more filler and tamp it until it can no longer be compressed. When the capsule is full, we then measure the weight of the total amount of powder in the capsule. Since we know there is 10mg of anavar in it, we can use the final weight to determine the amount of raw+filler that can fit in each capsule for anavar's specific density and use the formulas i mentioned beforehand to create a full batch.
 
A website, if created and managed properly, is no less secure than an email order. I’m confused how that’s a negative point for you.
You should establish analytical testing, HPLC testing, or at the very least some blood work from previous clients prior to building a website. You build a business from the ground up with testing and good word of mouth. Seems you went straight to the top without credentials. Business 101.
 
You should establish analytical testing, HPLC testing, or at the very least some blood work from previous clients prior to building a website. You build a business from the ground up with testing and good word of mouth. Seems you went straight to the top without credentials. Business 101.

That's a good point. We're in the process of getting our popular oils HPLC tested and I'll post the bloodwork I have saved in the mean time. The truth is we're not here for a quick dollar, we aim to be a solid source that people can rely on for quality gear. We do have great products, but you're correct that we have to prove that.

Also, if everyone is more comfortable with email orders, we can begin taking those as well.
 
NOT COMPLICATED...
Pictures of lab equipment, products, etc...
Crumpled paper
Write "Meso" + the date on it.

Reread the requirements for Meso's Underground forum.

COMPLY...and

FOLLOW

THE

REQUIREMENTS

...it's not hard. Use your "other handle" as a long standing member of this board and figure out how to buckle your intro up.

Show us your more than just a bucket of vials and some bags of powder.

I can post what you posted and call myself a source. This is half assed at best.
 
Here are the UPLC results from our supplier's current manufactured batch of raws:






Imgur

Vials of our finished products are being sent out to be tested as we speak.
 
Might get some orders after hplc tests come back. Until then, no idea why anyone would order from you when we have sources here with that plus much more. You posting your customers bloodwork proves little.

Provided UPLC tests on our batch of raws. Our finished products are in route for testing.

Hackers are licking their chops over AAS websites as of recent. Many of us won’t fuck them. A big outfit recently got hacked and it fucked over a lot of people.

No funds are stored on the site itself and our security is robust. There is absolutely nothing of value stored on the site that hackers would be interested in, but I understand the concern. Either way we're open to email orders as well.
 
So this shop close up already ?

Negative, we are currently having our products 3rd party tested--there isn't much to post about until we have the items the other members have asked for. Unfortunately this is not a quick process.

We have received a number of orders from Meso members--those of you who did order, please make use of our bloodwork credit once your levels stabilize.

We are also planning on adding more exotic compounds to our product listing. If there are any specific products you would like to see, let us know. MENT will most likely be our first addition.
 
Last edited:
Our BOGO sale on all testosterone and orals has been extended.

3rd party test results should be ready in the next week or so. Once again, if you have any questions or concerns, don't hesitate to reach out.
 
This guy followed almost zero of the most basic requests for him to source in the UGL section of this board...therefore, this source is 100% dead for me and anyone with common sense.
NOT SAFE TO ORDER FROM!
Any newbs who have had their money stolen, roped in by LE or been subjected to blackmail...it's your own fault for trusting this source.
Can we let this thread fucking die and stop bumping it for God's sake? There are legit vetted sources already around.
 
Back
Top