how to make steroid tablet

[suplex]

How are you guys!
I’m living in Asia.

I’m about to buy tablet machine

but, I don’t know how to make steroid tablet such as Stanozolol, Clenbuterol, Anavar with tablet machine, even more caps.

when I make tablet with tablet press machine, do I need to mix something with tablet raw powder?

hope guys reply

 

[1tank1]

How are you guys!
I’m living in Asia.

I’m about to buy tablet machine

but, I don’t know how to make steroid tablet such as Stanozolol, Clenbuterol, Anavar with tablet machine, even more caps.

when I make tablet with tablet press machine, do I need to mix something with tablet raw powder?

hope guys reply

Yes, you need a filler.

Shocked that you need to even ask this question coz all raws for pills/caps need be mixed with a filler/binding agent just to get to a required dose per unit.

You can't just buy a big bag of raw powder and throw it into a press machine

 

[suplex]

oh thank you so much! I’m ignorant
Could you let me know ratio and order to make? I can pay your teaching!

Yes, you need a filler.

Shocked that you need to even ask this question coz all raws for pills/caps need be mixed with a filler/binding agent just to get to a required dose per unit.

You can't just buy a big bag of raw powder and throw it into a press machine

 

[1tank1]

oh thank you so much! I’m ignorant
Could you let me know ratio and order to make? I can pay your teaching!

I'll give you some basic advice.

1) Buy a digital "gram" scale.
2) Decide what dose you want each pill to be (5mg/25mg/50mg etc) and how many pills you want to make.
3) Choose a neutral filler/binding agent.
4) Do some research if you want a recipe for ratios of raw to filler.

 

[Megadick3000]

You need filler excipients and binding agents.

Most common binding agent is Microcrystalline cellulose. Magnesium stearate is also used in many compositions as a lubricant (its a powder but it feels greasy in your fingers) as it helps the tablet press work right (but its used inside the pills themselves).

Then you need the bulk of the tablet which is usually an inert filling agent (inactive molecule) with favorable compression mechanics and cheap. Personally i like Inositol, albeit not inert.

Basically you take active drug, filler (inositol), microcrystalline cellulose, and a touch of magnesium stearate plus any coloring powders or even flavorings.

The exact ratios i dont know and depend on a variety of factors but the filler agent will make up the majority of the composition.

You also need to learn how to mill all these ingredients into a homogenous powder composition.

For drugs with really high potency (very low doses like micrograms) wet granulation should be utilized. In wet granulation you make a solution of the drug and a solvent, then you drip it into the filler agent powder while mixing, then put that through a sieve and dry the powder in a dish, once bone dry you proceed with adding other excipients for pressing. The key in wet granulation is to have an appropriate ratio of solution to filler powder, you want the mix to resemble perhaps crumbled feta cheese. If too little liquid you wont get proper dispersion and if too much the drying process becomes needlessly annoying.

 

[TheHaus88]

• Unless you plan on becoming a UGL and producing thousands of pills per week it's not worth it.

• If you have the money to buy the pill press and the mixing machines God bless you. I wish I had that kind of money and time because I would go into business for myself and become a kingpin lol.

• I've seen guys on YouTube capping SARMs and I would charge $100 a bottle too because the amount of time and effort it takes. And hand mixing scares me for the ratios when you need to be a little more accurate on doses. One pill could be 3 mg and another pill could be 25 mg. (Same could be said about UGL pills though)

• Even the local Bros that I know that supply the guys at the gym use oral suspension.

• This is how I homebrew orals. Cialis 20mg/1ml 30ml bottles. Which sell for $120

• I can make 10 bottles in less than 2 hours with zero effort or I can hand mix and cap maybe a couple hundred pills.

Oral suspension is the way to go.

• There are sources on here that sell pills for very cheap, I don't run orals year round so I don't need that many and it's tedious home brewing orals. I've considered stopping home brewing orals and only buying pills from a UGL source.

 

[Megadick3000]

• Unless you plan on becoming a UGL and producing thousands of pills per week it's not worth it.

• If you have the money to buy the pill press and the mixing machines God bless you. I wish I had that kind of money and time because I would go into business for myself and become a kingpin lol.

• I've seen guys on YouTube capping SARMs and I would charge $100 a bottle too because the amount of time and effort it takes. And hand mixing scares me for the ratios when you need to be a little more accurate on doses. One pill could be 3 mg and another pill could be 25 mg. (Same could be said about UGL pills though)

• Even the local Bros that I know that supply the guys at the gym use oral suspension.

• This is how I homebrew orals. Cialis 20mg/1ml 30ml bottles. Which sell for $120

• I can make 10 bottles in less than 2 hours with zero effort or I can hand mix and cap maybe a couple hundred pills.

Oral suspension is the way to go.

• There are sources on here that sell pills for very cheap, I don't run orals year round so I don't need that many and it's tedious home brewing orals. I've considered stopping home brewing orals and only buying pills from a UGL source.

I agree. Oral suspensions or even better, solutions, offer advantages including ease of preparation, consistently accurate dosing (most apparent in solutions vs suspensions), and cheaper production cost.

Their only real disadvantage is slightly less convenient dosing, and i mean slightly. However depending on the drug it may be less stable over time in solution vs as a powder solid so this molecular degradation becomes an issue on a case by case basis (exact drug being used).

Tablet pressing is needlessly complex and expensive for personal use. If hell bent on that path best to custom order pre-made tablets to your specifications by a source at time of ordering (generally the chinese).

Capsulation is doable but its more time consuming and complex verse oral solutions and suspensions, so why? Slightly easier dosing, and perhaps better molecule stability shelf life.

Of course if making solutions/suspensions you can avoid degredation issues by simply making small batches and keeping the bulk of the API (active pharmaceutical ingredient [the drug]) as a raw powder stored in an air tight amber glass or opaque jar stored in a dry cool and dark location.

Now if you wanna be the pablo escobar of juice then tablet pressing makes sense, but nobody wants to hold your hand on figuring out the excipient ratios for your specific circumstances so that you can take over the juice monkey world.

 

[Jet Labs]

You need filler excipients and binding agents.

Most common binding agent is Microcrystalline cellulose. Magnesium stearate is also used in many compositions as a lubricant (its a powder but it feels greasy in your fingers) as it helps the tablet press work right (but its used inside the pills themselves).

Then you need the bulk of the tablet which is usually an inert filling agent (inactive molecule) with favorable compression mechanics and cheap. Personally i like Inositol, albeit not inert.

Basically you take active drug, filler (inositol), microcrystalline cellulose, and a touch of magnesium stearate plus any coloring powders or even flavorings.

The exact ratios i dont know and depend on a variety of factors but the filler agent will make up the majority of the composition.

You also need to learn how to mill all these ingredients into a homogenous powder composition.

For drugs with really high potency (very low doses like micrograms) wet granulation should be utilized. In wet granulation you make a solution of the drug and a solvent, then you drip it into the filler agent powder while mixing, then put that through a sieve and dry the powder in a dish, once bone dry you proceed with adding other excipients for pressing. The key in wet granulation is to have an appropriate ratio of solution to filler powder, you want the mix to resemble perhaps crumbled feta cheese. If too little liquid you wont get proper dispersion and if too much the drying process becomes needlessly annoying.

There's absolutely ZERO need to ever use inositol to make aas tablets!

MCC is the #1 main filler and other binders/fillers/lubricants/disintegrants consist of magnesium stearate, copovidone silicon dioxide, precipitated silica, croscarmellose sodium and a few others that are more suited to candy production.

BTW love your avatar

 

[Rickt]

Yes, you need a filler.

Shocked that you need to even ask this question coz all raws for pills/caps need be mixed with a filler/binding agent just to get to a required dose per unit.

You can't just buy a big bag of raw powder and throw it into a press machine

Maybe he likes very strong tablets. I remember there was a guy who made caps and filled the cap with dbol no filler. Wondered why he didnt even fill 100 caps with 10grams.

 

[Rickt]

You need filler excipients and binding agents.

Most common binding agent is Microcrystalline cellulose. Magnesium stearate is also used in many compositions as a lubricant (its a powder but it feels greasy in your fingers) as it helps the tablet press work right (but its used inside the pills themselves).

Then you need the bulk of the tablet which is usually an inert filling agent (inactive molecule) with favorable compression mechanics and cheap. Personally i like Inositol, albeit not inert.

Basically you take active drug, filler (inositol), microcrystalline cellulose, and a touch of magnesium stearate plus any coloring powders or even flavorings.

The exact ratios i dont know and depend on a variety of factors but the filler agent will make up the majority of the composition.

You also need to learn how to mill all these ingredients into a homogenous powder composition.

For drugs with really high potency (very low doses like micrograms) wet granulation should be utilized. In wet granulation you make a solution of the drug and a solvent, then you drip it into the filler agent powder while mixing, then put that through a sieve and dry the powder in a dish, once bone dry you proceed with adding other excipients for pressing. The key in wet granulation is to have an appropriate ratio of solution to filler powder, you want the mix to resemble perhaps crumbled feta cheese. If too little liquid you wont get proper dispersion and if too much the drying process becomes needlessly annoying.

What he said.

 

[Rickt]

How are you guys!
I’m living in Asia.

I’m about to buy tablet machine

but, I don’t know how to make steroid tablet such as Stanozolol, Clenbuterol, Anavar with tablet machine, even more caps.

when I make tablet with tablet press machine, do I need to mix something with tablet raw powder?

hope guys reply

If by chance you decide to go the easy way with caps. The easiest way ive found and it works is to fill 100 caps with protien powder. Empty caps by Tipping it all into a ziplock bag with the raw. 1gram of raw will make 10mg per cap. Shake it all together very well then fill the caps with mix. Even i can do it.if you plan on making batches of 100 weigh the protien powder.
Tabs are much harder but the principle is the same once you have the weights of all the ingrediants to make 100. Double it for 200.

 

[Rickt]

I use protien powder because it mixes with the raw well but you can use dextrose powder or cocane even if you live in Canada.

 

[Megadick3000]

There's absolutely ZERO need to ever use inositol to make aas tablets!

MCC is the #1 main filler and other binders/fillers/lubricants/disintegrants consist of magnesium stearate, copovidone silicon dioxide, precipitated silica, croscarmellose sodium and a few others that are more suited to candy production.

BTW love your avatar

So your accustomed to using MCC as the filler itself in tablets?

My only personal experience in this is pressing powder into bricks, not tablets, which is a bit different. I uhhhh wont get into details of why i was pressing bricks, but in that case inositol was my primary component with MCC being as low as possible with just enough used to help facilitate the bricks structural integrity. Magnesium stearate was utilized but not in the composition but rather used to dust the metallic surfaces of the press itself before each pressing. This worked well for getting the brick out of the mold after pressing, but given the intended final use of the product was possible IV administration (something magnesium stearate is not suitable for) I opted to file off the thin magnesium stearate outside layer from the bricks surface using a nail file afterwards.

 

[TheHaus88]

I use protien powder because it mixes with the raw well but you can use dextrose powder or cocane even if you live in Canada.

What a waste of good cocaine lol

 

[1tank1]

I use protien powder because it mixes with the raw well but you can use dextrose powder or cocane even if you live in Canada.

If capping just for personal use you can literally use anything as a filler if you understand the raw ratios per volume of filler. I say that because some fillers weigh more (or less) or need more (or less) space in a cap so you need to understand that to get a more accurate unit dose.

Dex/Malto, protein powder, table sugar, coffee powder, rice flour, amino powder, creatine, vitamin powders, green tea, etc etc etc.....anything is possible in a cap if you know the weight vs volume for filler/raw ratios.

 

[Rickt]

What a waste of good cocaine lol

Thats canadians for you.

 

[Rickt]

If capping just for personal use you can literally use anything as a filler if you understand the raw ratios per volume of filler. I say that because some fillers weigh more (or less) or need more (or less) space in a cap so you need to understand that to get a more accurate unit dose.

Dex/Malto, protein powder, table sugar, coffee powder, rice flour, amino powder, creatine, vitamin powders, green tea, etc etc etc.....anything is possible in a cap if you know the weight vs volume for filler/raw ratios.

Dont know about table sugar and coffee. It needs to be ground fine. Maybe caster sugar. Or instant coffee. Have you done it with table sugar. Cant imagine the raws and sugar mixing. But. . .

 

[Norse13]

For drugs with really high potency (very low doses like micrograms) wet granulation should be utilized. In wet granulation you make a solution of the drug and a solvent, then you drip it into the filler agent powder while mixing, then put that through a sieve and dry the powder in a dish, once bone dry you proceed with adding other excipients for pressing. The key in wet granulation is to have an appropriate ratio of solution to filler powder, you want the mix to resemble perhaps crumbled feta cheese. If too little liquid you wont get proper dispersion and if too much the drying process becomes needlessly annoying.

Please don't try to teach this guy how to make microgram tablets if he has zero clue how to make 50mg tablets. Conceptually it may be not so complex (drip solution) but he'll never get it right for a good while. Good luck on controlling e2 with arimidex ranging from 100 to 1000mcg per tablet.

 

[1tank1]

Dont know about table sugar and coffee. It needs to be ground fine. Maybe caster sugar. Or instant coffee. Have you done it with table sugar. Cant imagine the raws and sugar mixing. But. . .

I was just highlighting that anything is possible if you know the weight vs volume but yes caster (or preferably Icing) would be much better for dispersion than granulated.

Ground coffee would be fine.

 

[Rickt]

I was just highlighting that anything is possible if you know the weight vs volume but yes caster (or preferably Icing) would be much better for dispersion than granulated.

Ground coffee would be fine.

Yes and good day to you. Making tabs for persona l use would be pricy right. Getting all the setup. Compaired to caps. Caps are cheap and easy. Kind of like me.