Making Anavar Tablets / Pills

[MikeOxsLong69]

Does anyone know of or has anyone seen how to make Anavar tablets / pills?

I guess what I'm asking is if there are any recipes around. I'm not sure what type of fillers & ratio of fillers to anavar powder I would need to start a batch of tablets.

I'm looking to make approximately 100 tablets of 10mg/pill for my fiance & I.

Now, I know that some people would tell me to "just eat the powder man!", but we prefer to have little tablets already made up, measured out, and ready-to-go each day while we do our first cycle of this substance.

I'm already pretty sure that we can find the right tablet presser to compact the powder into pills, once we have the powders & fillers properly measured first, so that shouldn't be a problem.

Anyhow, thanks in advance for any ideas & support.

Kind regards,
Aaron E.

 

[dennia]

Is easier to put in a capsule than to make a pill. A capsule machine filler is about 15$ and you find on ebay easy

And here is how to calculate the mg dosage

How To Cap "101"

This is how I do it. No 2 people probably do it the same. First off, there is 1000mcg's in a mg. There are 1000mg in a gram. Can you guess how many grams in a kilo, lol. The powder that is the main compound of desire is called active ingredient. The powder used to fill up space is called...

thinksteroids.com

And here how to work with that machine


View: https://youtu.be/JO37r628KDw

 

[MikeOxsLong69]

Thanks for tips and may consider this way, but I personally still prefer the compacted tablets/pills. Just wanted to know what filler people are using and how much before pressing each pill. Thanks again.

 

[xmilar]

Industrial pill presses are expensive and can raise suspicion when purchasing. They are not something you just buy from a store. Better off buying empty capsules and filling them. There is online diys on how to do this efficiently.

 

[Rings9841]

Make an oral suspension using Children’s ibuprofen. Like @xmilar I don’t think you fully understand pill press’s and the red flags it raises if you purchase one

 

[MikeOxsLong69]

Make an oral suspension using Children’s ibuprofen. Like @xmilar I don’t think you fully understand pill press’s and the red flags it raises if you purchase one

No, I'm talking about the little handheld or manual tablet punch pressers that are used for vitamins, candy, etc., etc.. Those should be legal as far as I know. @Rings9841 & @xmilar

There are legitimate reasons to buy pill press machines. Some people buy them to make candy pills for kids or people who want to turn their vitamin powders into tablets.

I've seen videos on YT on how to order pill pressers. Watch these videos below to see how to make tablets from powders and binders:


View: https://www.youtube.com/watch?v=xCEaOzApPK8




View: https://www.youtube.com/watch?v=7XTs7JcSmm4



View: https://www.youtube.com/watch?v=9fgDwJS2SdM

 

[xmilar]

No, I'm talking about the little handheld or manual tablet punch pressers that are used for vitamins, candy, etc., etc.. Those should be legal as far as I know. @Rings9841 & @xmilar

There are legitimate reasons to buy pill press machines. Some people buy them to make candy pills for kids or people who want to turn their vitamin powders into tablets.

I've seen videos on YT on how to order pill pressers. Watch these videos below to see how to make tablets from powders and binders:


View: https://www.youtube.com/watch?v=xCEaOzApPK8




View: https://www.youtube.com/watch?v=7XTs7JcSmm4



View: https://www.youtube.com/watch?v=9fgDwJS2SdM

Do you have a link to the type of press you are speaking of?

 

[Rings9841]

No, I'm talking about the little handheld or manual tablet punch pressers that are used for vitamins, candy, etc., etc.. Those should be legal as far as I know. @Rings9841 & @xmilar

There are legitimate reasons to buy pill press machines. Some people buy them to make candy pills for kids or people who want to turn their vitamin powders into tablets.

I've seen videos on YT on how to order pill pressers. Watch these videos below to see how to make tablets from powders and binders:


View: https://www.youtube.com/watch?v=xCEaOzApPK8




View: https://www.youtube.com/watch?v=7XTs7JcSmm4



View: https://www.youtube.com/watch?v=9fgDwJS2SdM

Well I learned something new never seen small single punches Like that.

 

[MikeOxsLong69]

So can we just use cornstarch or protein powder as filler and then compress them with this pill / tablet presser? What would the ratio be of filler to active ingredient powder?

 

[xmilar]

So can we just use cornstarch or protein powder as filler and then compress them with this pill / tablet presser? What would the ratio be of filler to active ingredient powder?

Watch the DIYS, you can use any filler. People like to use creatine. Do you have a link to this press you speak of ?>

 

[MikeOxsLong69]

Watch the DIYS, you can use any filler. People like to use creatine. Do you have a link to this press you speak of ?>

I will find the link and then share it in a few minutes.

Do you know the ratio of creatine to Anavar 10mg pills? How do I prepare it to get the right 10mg of active ingredients to filler ratio?

Also, what about the toxic metals that are found in the roid powders? How do we get rid of toxic heavy metals such as; mercury, lead, iron, arsenic, and other metals found in these powders? Is there a filter that we can pass the powders through?

 

[xmilar]

I will find the link and then share it in a few minutes.

Do you know the ratio of creatine to Anavar 10mg pills? How do I prepare it to get the right 10mg of active ingredients to filler ratio?

Also, what about the toxic metals that are found in the roid powders? How do we get rid of toxic heavy metals such as; mercury, lead, iron, arsenic, and other metals found in these powders? Is there a filter that we can pass the powders through?

You need to look at the diys.., Its all based on weights. Measure the weights of 5 finished pills minus the weight of the compounds you are using will give you the rough weight of the filler you need. I cant explain it over text.. but there are good diys. I think r/steroids has one if i recall correctly.

 

[Meterman05]

Why not just buy a pre-made powder that's designed to make pressed pills like the one below? I have never made tabs as punching them one by one seems like an awful long tedious thing to do when you could do caps easier. Your dead set on pills so if it were me I would use the pre-made excipient thats designed for compression. The last thing you want to do is make pills of compressed creating or cornstarch only to have them start falling apart.

https://www.amazon.com/Firmapress-Tablet-Powder-Pharmaceutical-Excipient/dp/B01CTO0NVK?th=1

 

[MikeOxsLong69]

Why not just buy a pre-made powder that's designed to make pressed pills like the one below? I have never made tabs as punching them one by one seems like an awful long tedious thing to do when you could do caps easier. Your dead set on pills so if it were me I would use the pre-made excipient thats designed for compression. The last thing you want to do is make pills of compressed creating or cornstarch only to have them start falling apart.

https://www.amazon.com/Firmapress-Tablet-Powder-Pharmaceutical-Excipient/dp/B01CTO0NVK?th=1

Right, but how do I know what filler powder to active ingredient ratio that I use in a bulk batch or even if I were to do 1 pill at a time? I would need 10mg pills, but how much filler would I use for each pill? Nobody seems to answer this question clearly.

 

[Meterman05]

Right, but how do I know what filler powder to active ingredient ratio that I use in a bulk batch or even if I were to do 1 pill at a time? I would need 10mg pills, but how much filler would I use for each pill? Nobody seems to answer this question clearly.

I would start with the website below they have a lot of tools that you can use to figure out your ratios.

https://www.lfatabletpresses.com/

 

[xmilar]

Right, but how do I know what filler powder to active ingredient ratio that I use in a bulk batch or even if I were to do 1 pill at a time? I would need 10mg pills, but how much filler would I use for each pill? Nobody seems to answer this question clearly.

I told you already.. THERE are tones of DIYS.. look at r/steroids . Explains how to measure and calculate filler, compounds etc etc how to weigh.. Some of this game is doing research on your own, not just asking and having everything laid out for you.

 

[MikeOxsLong69]

I told you already.. THERE are tones of DIYS.. look at r/steroids . Explains how to measure and calculate filler, compounds etc etc how to weigh.. Some of this game is doing research on your own, not just asking and having everything laid out for you.

Who is "r/steroids"? Is he someone here on this forum or on some other site? Is he someone from his own website or blog? What are you referring to? Not sure why you'd expect me to know what you're talking about, especially since you aren't being very specific here. Also, you say to finish 5 pills minus the powder of the active ingredient, but what do the 5 pills represent? I don't understand how you came up with that ratio or what you even meant by that since, again, you're not being very specific. I guess you expect people to read your mind or just magically know things that you feel you are knowledgeable in, no? And I noticed that you expected me to share the link to the pill presser as you've clearly requested it at least twice in the past, meanwhile, you tell me to go do my own research and never specified a single URL as a reference to the sources of information that you claim is available. I don't quite understand your style here. Doesn't quite make any sense.

 

[MikeOxsLong69]

I would start with the website below they have a lot of tools that you can use to figure out your ratios.

https://www.lfatabletpresses.com/

Thanks so much my friend for being very specific in your reply, even attaching a link as a reference to the source of information that you're referring to. I will definitely take a look.

 

[Zebedee]

Given most of the questions you are asking & that you're not understanding much of what members are saying about the process, then I would highly recommend that you forget the idea of making your own orals, be it tablets or capsules.

Instead I would highly recommend you search through both The Underground & Lab Testing sub-forums & look for a vendor offering pre-made anavar tablets or capsules & who has had good feedback both in terms of blind lab testing by members & customer service.

Making consistently accurate dosed caps of 10mg's active ingredient is not a simple task. It requires good technical understanding of the whole process, much of which has not even been touched on so far within this thread. You will not succeed on your first attempt at capping. Actual UGL's often struggle to atain that level of competency, even after they've been doing it on quite a large scale for quite a long time.

As for you managing to do it with tablets, that requires even more knowledge & technical competency & you are not going to achieve it mate.

It would be incredibly reckless if you to try either & then let your girlfriend take those caps or tabs.

I'm genuinely not criticising the having a go at you, I'm trying to help you.

If you are still interested in learning to cap oral AAS in the future, then I would say start with the basics & & learn to cap regular, OTC powdered supplements first. Learn both the practical handling skills & whilst doing that, read up as much as you can on the basic technical side of it: capsule sizes / internal volumes, powder density, what qualities are required in a filler, which to choose & why, the importance of particle sizes, blending issues, geometric dilution, trituration.

Until you know all that stuff at the very least, the end result of you trying to make 10mg dosed caps WILL end in failure mate.

Again, totally forget making tablets period.

 

[Rings9841]

I would also think about removing your face from your avatar If you’re discussing manufacturing steroids and have your actual name as your handle… Unless you are in a country where that’s legal then disregard my comment.