Nordic Fusion Labs Canadian Domestic Only

I have no complaints about Nordic gear. Always seemed spot on with the results obtained from a cycle.
 
It's time for both a service and product review ( early still ).

Keep in mind I respond extremely well to AAS...much better than most I'd say, and I'm extremely lean so results are quite noticeable as they come.

I made a decent sized order a few weeks ago. He had everything included, except an item that he agreed to toss in for free. So within 2 business days he had the free item shipped separately, almost instantly. For that, I say thank you @Nordic

I'm running the test e at 750/week. I started the dbol during the second week, and 5 days in I'm having incredible pumps and fullness at 40mg split morning/evening.

My libido is increasing daily now. It'll be 2 weeks Monday for the test. I'm up 7lbs in less than 2 weeks, while being only 6 days into the dbol.

PIP; none. My very first shot had some pain afterwards but that was my fault, as well as pinning 1.5cc for the first time in 7 months. Shots are smooth.

Too early to tell but so far so good! Will keep everybody posted.
 
It's time for both a service and product review ( early still ).

Keep in mind I respond extremely well to AAS...much better than most I'd say, and I'm extremely lean so results are quite noticeable as they come.

I made a decent sized order a few weeks ago. He had everything included, except an item that he agreed to toss in for free. So within 2 business days he had the free item shipped separately, almost instantly. For that, I say thank you @Nordic

I'm running the test e at 750/week. I started the dbol during the second week, and 5 days in I'm having incredible pumps and fullness at 40mg split morning/evening.

My libido is increasing daily now. It'll be 2 weeks Monday for the test. I'm up 7lbs in less than 2 weeks, while being only 6 days into the dbol.

PIP; none. My very first shot had some pain afterwards but that was my fault, as well as pinning 1.5cc for the first time in 7 months. Shots are smooth.

Too early to tell but so far so good! Will keep everybody posted.
Good to hear brother! Every thing i had from nordic was excelent good rep
 
Yeah so far the nordic brand has been working well with me also. Was going to try a Sten and Tren hex cycle but decided to go sten and NPP instead. My joints been hurting so want the NPP to lube those fuckers up. As usual service was fast and easy. Overall very happy. Week one of cycle down so it will be interesting to see how 8 weeks of this work out for me
 
I've read about Nordic before they were good reviews. Last lab I ran was new port been off for 2 years now. Hoping to step back with a blast this year just dialling in my trt for now
 
You'll be in love all over again. Thats for sure. With trt Id just go short and hard blasts. 6 week on and then off till after doc visit. Then do it again. that way they wont take you off trt as your blood levels will have a chance to normalize
 
I remember when I first posted about them and gave them a shot, got harped on alot (understandable since alot of shills out there making crap up, bit it still annoyed me..) But I am glad to see others having the same feedback as me. happy as heck I tried them before going private. NO complaints and hopefully they will stay the same for years to come.
planing to do a simple test cycle this fall with a bit of deca (or possibly maste, havent decided yet)
I avoid orals nowadays and still have a bunch of drol, SD and dbol tucked away, but maybe ill try their anavar some time, good var is great. I dont care what others say its great bulking or cutting (with some test), quality gains and great pumps and power.
 
This time around we will give a better introduction

We have currently stopped USA shipping for safety reasons for us and our clients. Good luck to the USA brothers looking for a good source. Im sure the people here will be able to point you in the right direction

We have been around for 4 years now being mainly a word of mouth company. Staying local for the last 3 years and now just expanding outside of our area.

Here is what we have to offer:


Orals (Now in sachets)

Tbol 50tabsx20mg

Anavar 50tabsx20mg

Winny 100tabsx10mg

Tianabol (10mg var/10mg tbol per tab) 100 tabs x10mg

Tianabol (10mg var/10mg tbol per tab) 50 tabs x 10mg

Dbol 50tabsx20mg

Anadrol 50tabs x 25mg

Anadrol 50tabsx50mg

Superdrol 50tabsx10mg

Proviron 50tabs x 25mg

Halotest 50tabsx10mg

Primo ace 50tabsx20mg


Ancillaries

Aromasin 50tabsx12.5mg

Nolvadex 50tabsx20mg

Arimadex 50tabsx1mg

Clomid 50tabsx50mg

Letrozol 50tabsx1.25mg


Sexual Aids

Cialis 50tabsx20mg

Viagra 50tabsx50mg


Injectables 10ml bottles


Test Prop 100mg/ml

Test Prop 200mg/ml

Test Cyp 200mg/ml

Test Enth 250mg/ml

Tren Ace 100mg/ml

Tren Enth 100mg/ml

Tren Enth 200mg/ml

Mast Prop 100mg/m

Mast Enth 100mg/ml

NPP 100mg/ml

Deca 300mg/ml

EQ 300mg/ml

Primo Enth 100mg/ml

Sust 250mg/ml

Sust 350mg/ml

T400

Power Stack (tren ace 50mg/tren enth 150mg/ test enth 200mg per ml)

Cut Stack (75mg prop/ 50mg tren ace/ 50mg mast prop per ml)



Fat Loss

Clenbuterol 50mcgx100tabs

Clen Pens 10ml pens--- 80sprays @ .025mcg spray


Peptides

HGH jeotropin 100iu kits

Norvotropin 100iu kits

Belitropina 150iu kits

Serostim 126iu kits (pharm grade)

HCG 5000iu (out of stock)


SARMS

Nutrobol

Ostarine

Cardarine

Anabolicum

Andarine




Production Process


Tablets:


Sterilization/ Hygiene:

All tablets are mixed and produced with machinery that complies with GMP standards. Face masks are worn, as are gloves. All tablets are made in a separate area far from where vials are produced for sterility reasons for both areas


Process:

Tablet binders, excipients, dyes, and API's are measured, sifted, and then placed into a pharmaceutical mixer for 10-15minutes to ensure consistent product dosing.

Once mixed, tablet mix is fed into a tablet press which then produces the final tabbed product

Tablets are then machine counted into each sachet



Injectables:

Sterilization:

Vials and stoppers thoroughly washed in water and then rinsed again with isopropyl. From there they are put into an autoclave for thorough sterilization

Beakers and media bottles are washed with water first. Then rinsed with isopropyl. Once dried they are then put into an oven at 220 degrees for a period of 30-45 minutes

Tubing for sterile oil dispensing from beakers to media bottles is washed with isopropyl and dried at 170 degrees, then vacuum sealed until next use.



Hygiene:

Lab coats are worn throughout the whole process. Gloves are frequently changed due to the different types of solvents and materials used. Face masks are worn at all times while working with all substances



Process:

After a cleaning of the entire production area with isopropyl cleaner, vials/media bottles are sterilized and placed to heat dry. While they bake, the injectables are prepared with care to ensure sterility. Once the hormone is dissolved throughly, it is run through a .22um whatman polycap filter into a sterile glass media bottle.

From the media bottles to the vials a peristaltic pump is used. New sterile tubing is used each time this is done. Once vials are filled, stoppers are put in place, and then tops crimped on



Testing:

All goods are tested first with a labmax testing kit to verify that producer has sent the right items. After that a melt test is done in order to further verify that substances are what they should be.
This time around we will give a better introduction

We have currently stopped USA shipping for safety reasons for us and our clients. Good luck to the USA brothers looking for a good source. Im sure the people here will be able to point you in the right direction

We have been around for 4 years now being mainly a word of mouth company. Staying local for the last 3 years and now just expanding outside of our area.

Here is what we have to offer:


Orals (Now in sachets)

Tbol 50tabsx20mg

Anavar 50tabsx20mg

Winny 100tabsx10mg

Tianabol (10mg var/10mg tbol per tab) 100 tabs x10mg

Tianabol (10mg var/10mg tbol per tab) 50 tabs x 10mg

Dbol 50tabsx20mg

Anadrol 50tabs x 25mg

Anadrol 50tabsx50mg

Superdrol 50tabsx10mg

Proviron 50tabs x 25mg

Halotest 50tabsx10mg

Primo ace 50tabsx20mg


Ancillaries

Aromasin 50tabsx12.5mg

Nolvadex 50tabsx20mg

Arimadex 50tabsx1mg

Clomid 50tabsx50mg

Letrozol 50tabsx1.25mg


Sexual Aids

Cialis 50tabsx20mg

Viagra 50tabsx50mg


Injectables 10ml bottles


Test Prop 100mg/ml

Test Prop 200mg/ml

Test Cyp 200mg/ml

Test Enth 250mg/ml

Tren Ace 100mg/ml

Tren Enth 100mg/ml

Tren Enth 200mg/ml

Mast Prop 100mg/m

Mast Enth 100mg/ml

NPP 100mg/ml

Deca 300mg/ml

EQ 300mg/ml

Primo Enth 100mg/ml

Sust 250mg/ml

Sust 350mg/ml

T400

Power Stack (tren ace 50mg/tren enth 150mg/ test enth 200mg per ml)

Cut Stack (75mg prop/ 50mg tren ace/ 50mg mast prop per ml)



Fat Loss

Clenbuterol 50mcgx100tabs

Clen Pens 10ml pens--- 80sprays @ .025mcg spray


Peptides

HGH jeotropin 100iu kits

Norvotropin 100iu kits

Belitropina 150iu kits

Serostim 126iu kits (pharm grade)

HCG 5000iu (out of stock)


SARMS

Nutrobol

Ostarine

Cardarine

Anabolicum

Andarine




Production Process


Tablets:


Sterilization/ Hygiene:

All tablets are mixed and produced with machinery that complies with GMP standards. Face masks are worn, as are gloves. All tablets are made in a separate area far from where vials are produced for sterility reasons for both areas


Process:

Tablet binders, excipients, dyes, and API's are measured, sifted, and then placed into a pharmaceutical mixer for 10-15minutes to ensure consistent product dosing.

Once mixed, tablet mix is fed into a tablet press which then produces the final tabbed product

Tablets are then machine counted into each sachet



Injectables:

Sterilization:

Vials and stoppers thoroughly washed in water and then rinsed again with isopropyl. From there they are put into an autoclave for thorough sterilization

Beakers and media bottles are washed with water first. Then rinsed with isopropyl. Once dried they are then put into an oven at 220 degrees for a period of 30-45 minutes

Tubing for sterile oil dispensing from beakers to media bottles is washed with isopropyl and dried at 170 degrees, then vacuum sealed until next use.



Hygiene:

Lab coats are worn throughout the whole process. Gloves are frequently changed due to the different types of solvents and materials used. Face masks are worn at all times while working with all substances



Process:

After a cleaning of the entire production area with isopropyl cleaner, vials/media bottles are sterilized and placed to heat dry. While they bake, the injectables are prepared with care to ensure sterility. Once the hormone is dissolved throughly, it is run through a .22um whatman polycap filter into a sterile glass media bottle.

From the media bottles to the vials a peristaltic pump is used. New sterile tubing is used each time this is done. Once vials are filled, stoppers are put in place, and then tops crimped on



Testing:

All goods are tested first with a labmax testing kit to verify that producer has sent the right items. After that a melt test is done in order to further verify that substances are what they should be.
 
Hey Guys, I would really like to place an order with you as Ive heard non stop good things. Im ne to the whole forum thing n have spent the last two wks reading reviews n you guys are mosdef the best for Canada! I sent you my email n hope to hear from you soon, thanks.
 
Hey Guys, I would really like to place an order with you as Ive heard non stop good things. Im ne to the whole forum thing n have spent the last two wks reading reviews n you guys are mosdef the best for Canada! I sent you my email n hope to hear from you soon, thanks.

PM me
 
Back
Top