MESO-Rx Sponsor Opti USA DOMESTIC - HGH, INJECTABLES, TABLETS, PEPTIDES, & MISC

[SwolieGuacamole]

Yes. TestC, Deca, MastE and primo thus far bud.



Good questions and I don’t believe you missed anything as I don’t recall him publicly answering either. Hopefully he will address this soon.

Same. I was looking to put an order in but that whole thing made me pause, and I guess it’s still an open question. But being people have ran it and there’s some blind testing, I guess I’ll have to see.

 

[SwolieGuacamole]

If he was asked and not answered, he will be asked again.
Everyone provides info about basic stuff like this.

Why is he any different and why does he see fit to not answer those questions?

The only thing I see being a reasonable answer, is that he’s really not active here. Forgot or just let it pass on its own without having to address. If testing is good who cares. Just want to know what I’m pinning.

 

[FastBun]

If he was asked and not answered, he will be asked again.
Everyone provides info about basic stuff like this.

Why is he any different and why does he see fit to not answer those questions?

I would deff ask again… there is no harm in that question… are the oils resell from China or is he brewing them??? Even the tabs… I know seasoned vets here know how hard Tableting is and how daunting is to get very precise and accurate dosing…

 

[Sagnastymuscle]

I'm pretty sure is legit. I'm was more curious if Jintropin is as good or better than other pharma in the market .

I think it’s pretty negligible unless it’s serostim
Good quality generic should be on par with lower teir pharmaceuticals

 

[Lovegod82]

Go get some, get it tested and run it. No.need hijack the thread over n over again

Over and over ?I only asked once. Keep it pushing bro

 

[Lovegod82]

I think it’s pretty negligible unless it’s serostim
Good quality generic should be on par with lower teir pharmaceuticals

Thank for your input big dog.

 

[Opti]

what I was implying was he never posted his set up or “lab” or brewing or sterility procedures… for the hgh it’s completely different as they are buying from China and re selling… but I agree with issues getting buried… especially when sources get so big it won’t even matter.. I agree with you…I have bashed axles thread and his mistakes and no gives a damn… just shows what people really care for… fast touchdowns…

Oh, gotcha. Yeah Opti and Stan are old vets/members who later became sources, who were vouched for by members and accepted by the community. Plus like you say, Opti came in only selling gh at first. They got a pass on the old school vetting but have definitely proved themselves to be top vendors. Personally I’ve enjoyed watching Opti’s business grow. He started as small as one possibly could and is now a one stop shop. Stan’s story is also very commendable and to be respected.

This was mentioned in another thread, a few days ago.

Do you think they should provide that info, regardless of how they ended up joining as sources?

I think they should but Stan for example never did… but is a meso golden standard… Optis track record is very good too but not as long as Stan when it comes to oils… but I think every source should especially the new ones… OPSEC regard is BS… they should know how to remove meta data… and no one should know what their labs look like or is located so thats shit…

I’m not trying to read back through all the side talk. But wasn’t it suspected that it’s relabeled China gear? Source wouldn’t answer about who was brewing it.

True lmao! @B Ware do you have any clue on what the fuss was all about that @SwolieGuacamole referred to regarding the change of oils or what have you!

@Opti when’s that mct line dropping bud?

I think the whole thing at question was where was the oil coming from. Was it brewed domestic or Chinese rebrand. Which left a whole unknown about the line up in its entirety.

I do see there was a ton of raw and finished oil testing. But did he ever clear anything up.

But why not say if that is the case or not?

I believe he was asked, but no answer to that.

I am not sure why that would be.

Or maybe I missed something.

If he was asked and not answered, he will be asked again.
Everyone provides info about basic stuff like this.

Why is he any different and why does he see fit to not answer those questions?

I would deff ask again… there is no harm in that question… are the oils resell from China or is he brewing them??? Even the tabs… I know seasoned vets here know how hard Tableting is and how daunting is to get very precise and accurate dosing…

Good afternoon, Meso. I understand there are a few questions about my injectables, and I believe I can address them without compromising OPSEC on my end.

I have a vague recollection of @carbon adams asking a few questions about my injectables. However, when I went to answer, I noticed he was asking the same questions repeatedly in many different threads, leading me to believe he was more focused on increasing his post count than genuinely seeking information to benefit the community.

This was my assumption, so if you all see it differently, and this was not his intention, I will be the first to apologize. As you all know, I am not fond of back-and-forth, heated exchanges. I believe we can all remain civil, respectfully presenting our views and allowing the community to reach a conclusion.

Now, I'd like to address a few questions. There were never any oil changes. I chose to discontinue using the previous supplier because I wanted to contribute to the production process. These injectables do not utilize unfiltered oils sourced from China, despite our raw materials originating there. All oils and tablets, excluding Clen, are produced domestically in the USA. I'd prefer not to go into specifics for reasons that should be clear.

Our injectables demonstrate the time and care we put into even the smallest details, from the logo-top to the silicone stopper and the oil itself. The final product undergoes a 0.10μm filtration process. Any brewer will understand that this is a challenging and time-consuming task.


@FastBun, @iris, @B Ware, @SwolieGuacamole, @liftstrong001

I hope this clarifies any concerns you may have. The MCT lineup will be available on January 1st and will include the following items.

12ml
Test Prop 100mg/ml
Test Ent 250mg/ml
Test Cyp 250mg/ml
Sus 250mg/ml
EQ 300mg/ml
Deca 300mg/ml
NPP 100mg/ml
Masteron Prop 100mg/ml
Masteron Ent 200mg/ml
Tren Ace 100mg/ml
Tren Ent 200mg/ml
Primo Ent 200mg/ml

BLENDS:
Test Ent-Primo Ent 200mg-150mg/ml
Test Ent-Test Cyp 200mg-200mg/ml


The tabs listed below will become available shortly.
Kickstand - Viagra/Cialis
Viagra
Aromasin
Clomid
Nolvadex




Happy (early) New Year to everyone! I hope 2025 brings prosperity and, most importantly, good health to you and your loved ones.

 

[iris]

have a vague recollection of @carbon adams asking a few questions about my injectables. However, when I went to answer, I noticed he was asking the same questions repeatedly in many different threads, leading me to believe he was more focused on increasing his post count than genuinely seeking information to benefit the community.

That you should say this, it's total trash.

And no, you have not clarified anything

[ lol @FastBun ]

 

[Opti]

now its "getting weird" ,,,,, -View attachment 309369

Minimum 75mg, eye contact is mandatory. I can't wait

Thank you, gentlemen, for the much-needed laugh.

 

[Sly Devil]

Good afternoon, Meso. I understand there are a few questions about my injectables, and I believe I can address them without compromising OPSEC on my end.

I have a vague recollection of @carbon adams asking a few questions about my injectables. However, when I went to answer, I noticed he was asking the same questions repeatedly in many different threads, leading me to believe he was more focused on increasing his post count than genuinely seeking information to benefit the community.

This was my assumption, so if you all see it differently, and this was not his intention, I will be the first to apologize. As you all know, I am not fond of back-and-forth, heated exchanges. I believe we can all remain civil, respectfully presenting our views and allowing the community to reach a conclusion.

Now, I'd like to address a few questions. There were never any oil changes. I chose to discontinue using the previous supplier because I wanted to contribute to the production process. These injectables do not utilize unfiltered oils sourced from China, despite our raw materials originating there. All oils and tablets, excluding Clen, are produced domestically in the USA. I'd prefer not to go into specifics for reasons that should be clear.

Our injectables demonstrate the time and care we put into even the smallest details, from the logo-top to the silicone stopper and the oil itself. The final product undergoes a 0.10μm filtration process. Any brewer will understand that this is a challenging and time-consuming task.


@FastBun, @iris, @B Ware, @SwolieGuacamole, @liftstrong001

I hope this clarifies any concerns you may have. The MCT lineup will be available on January 1st and will include the following items.

12ml
Test Prop 100mg/ml
Test Ent 250mg/ml
Test Cyp 250mg/ml
Sus 250mg/ml
EQ 300mg/ml
Deca 300mg/ml
NPP 100mg/ml
Masteron Prop 100mg/ml
Masteron Ent 200mg/ml
Tren Ace 100mg/ml
Tren Ent 200mg/ml
Primo Ent 200mg/ml

BLENDS:
Test Ent-Primo Ent 200mg-150mg/ml
Test Ent-Test Cyp 200mg-200mg/ml


The tabs listed below will become available shortly.
Kickstand - Viagra/Cialis
Viagra
Aromasin
Clomid
Nolvadex




Happy (early) New Year to everyone! I hope 2025 brings prosperity and, most importantly, good health to you and your loved ones.

Thank you for clarifying things. I’m glad to read the oils are made in the U.S! It is nice to see that while other sources are running out of products due to the raw shortage you are launching a new line of oils.

 

[FastBun]

Good afternoon, Meso. I understand there are a few questions about my injectables, and I believe I can address them without compromising OPSEC on my end.

I have a vague recollection of @carbon adams asking a few questions about my injectables. However, when I went to answer, I noticed he was asking the same questions repeatedly in many different threads, leading me to believe he was more focused on increasing his post count than genuinely seeking information to benefit the community.

This was my assumption, so if you all see it differently, and this was not his intention, I will be the first to apologize. As you all know, I am not fond of back-and-forth, heated exchanges. I believe we can all remain civil, respectfully presenting our views and allowing the community to reach a conclusion.

Now, I'd like to address a few questions. There were never any oil changes. I chose to discontinue using the previous supplier because I wanted to contribute to the production process. These injectables do not utilize unfiltered oils sourced from China, despite our raw materials originating there. All oils and tablets, excluding Clen, are produced domestically in the USA. I'd prefer not to go into specifics for reasons that should be clear.

Our injectables demonstrate the time and care we put into even the smallest details, from the logo-top to the silicone stopper and the oil itself. The final product undergoes a 0.10μm filtration process. Any brewer will understand that this is a challenging and time-consuming task.


@FastBun, @iris, @B Ware, @SwolieGuacamole, @liftstrong001

I hope this clarifies any concerns you may have. The MCT lineup will be available on January 1st and will include the following items.

12ml
Test Prop 100mg/ml
Test Ent 250mg/ml
Test Cyp 250mg/ml
Sus 250mg/ml
EQ 300mg/ml
Deca 300mg/ml
NPP 100mg/ml
Masteron Prop 100mg/ml
Masteron Ent 200mg/ml
Tren Ace 100mg/ml
Tren Ent 200mg/ml
Primo Ent 200mg/ml

BLENDS:
Test Ent-Primo Ent 200mg-150mg/ml
Test Ent-Test Cyp 200mg-200mg/ml


The tabs listed below will become available shortly.
Kickstand - Viagra/Cialis
Viagra
Aromasin
Clomid
Nolvadex




Happy (early) New Year to everyone! I hope 2025 brings prosperity and, most importantly, good health to you and your loved ones.

you basically replied with abundance of filler words and ended up saying nothing… only that they are not finished oils from China… Stan has been sourcing for over a decade and has been very open within reasoning about his procedures and is still standing implying he isn’t breaching opsec.. DNM vendors have higher agencies after them constantly and many post pictures of their products etc and some get caught and good ones don’t so you posting lab pics and discussing your procedures isn’t going to get you caught.. what gets you caught is poor shipping, importing materials etc…

 

[dontletheoldmanin]

you basically replied with abundance of filler words and ended up saying nothing… only that they are not finished oils from China… Stan has been sourcing for over a decade and has been very open within reasoning about his procedures and is still standing implying he isn’t breaching opsec.. DNM vendors have higher agencies after them constantly and many post pictures of their products etc and some get caught and good ones don’t so you posting lab pics and discussing your procedures isn’t going to get you caught.. what gets you caught is poor shipping, importing materials etc…

I kind thought the words were used over n over again myself bunch of words actually saying nothing.
Only thing you have done here is acknowledge you have an issue, nothing more.

 

[Sly Devil]

you basically replied with abundance of filler words and ended up saying nothing… only that they are not finished oils from China… Stan has been sourcing for over a decade and has been very open within reasoning about his procedures and is still standing implying he isn’t breaching opsec.. DNM vendors have higher agencies after them constantly and many post pictures of their products etc and some get caught and good ones don’t so you posting lab pics and discussing your procedures isn’t going to get you caught.. what gets you caught is poor shipping, importing materials etc…

You guys are seriously asking for lab pictures? The only lab here that provided some is Axle and you guys didn’t even know what you were looking at are you would have ran him off. It’s literally the cheapest shit you can buy and their tubing is the same hose you use to run to your sink or toilet. I can keep going but no source shares pictures of their lab.

Opti just addressed the questions that were asked last night. You guys are treating this source like he hasn’t been in the game a long time with 0 complaints.

 

[dontletheoldmanin]

You guys are seriously asking for lab pictures? The only lab here that provided some is Axle and you guys didn’t even know what you were looking at are you would have ran him off. It’s literally the cheapest shit you can buy and their tubing is the same hose you use to run to your sink or toilet. I can keep going but no source shares pictures of their lab.

Opti just addressed the questions that were asked last night. You guys are treating this source like he hasn’t been in the game a long time with 0 complaints.

Eatting my popcorn eye roll to this above.
Surely you can reread for yourself and come to the conclusion he answered buck all.
Just a jumbling of words, sorta like a politician

 

[FastBun]

You guys are seriously asking for lab pictures? The only lab here that provided some is Axle and you guys didn’t even know what you were looking at are you would have ran him off. It’s literally the cheapest shit you can buy and their tubing is the same hose you use to run to your sink or toilet. I can keep going but no source shares pictures of their lab.

Opti just addressed the questions that were asked last night. You guys are treating this source like he hasn’t been in the game a long time with 0 complaints.

 

[readalot]

silicone stopper

Recent posts...

Post in thread 'Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic'

Sunday at 6:33 PM

Was interested in Tracy's thoughts. I had thought they were common for lyo vials.

https://www.permselect.com/sites/default/files/2019-09/Silicone_Chemical_Compatibility_Chart.pdf

To Ghoul's point. See benzol and benzyl group entries above.

https://www.kgk-rubberpoint.de/wp-content/uploads/migrated/paid_content/artikel/2324.pdf

Shows BB in the worst category of silicone compatibility here as well:

Chemical Compatibility Chart | Applications| Jehbco Silicones

Silicone rubber has excellent chemical compatibility with a wide range of materials, often providing and advantage over other materials with similar elastomeric properties. In particular, silicone displays outstanding chemical compatibility with water, aqueous and most chemically polar substances.

jehbco.com.au

• Ghoul

• 

More:

Search results for query: Novapure

thinksteroids.com

Thanks @Ghoul

 

[dontletheoldmanin]

You guys are seriously asking for lab pictures? The only lab here that provided some is Axle and you guys didn’t even know what you were looking at are you would have ran him off. It’s literally the cheapest shit you can buy and their tubing is the same hose you use to run to your sink or toilet. I can keep going but no source shares pictures of their lab.

Opti just addressed the questions that were asked last night. You guys are treating this source like he hasn’t been in the game a long time with 0 complaints.

I think I've seen actually atleast 10 sources show lab photos since being a member here..
Not sure what sand your head is in but take.it out see the world.

Actually here just now, these guys have lab photos even highlighted on announcements.
Gosh it's sucks when people can see through your own bs

Post in thread 'Endura Biosciences (Peptides & Steroids)'

Sep 24, 2024

Dear MESO-rx Members,

I sincerely apologize for the delay in getting back to your questions. We’ve now assigned a dedicated team member to manage MESO, and moving forward, we’re committed to continuously improving our service to ensure your satisfaction.

In the meantime, I’d like to share some photos of our peptide production facility and showcase a few of our products:




To make it easier for you to reach us, we’ve updated our...

• Endura Biosciences

 

[SenorSuperdrol]

I haven’t ordered from opti yet, but I keep tabs on the sources. Like all of you.

I get that this isn’t the Meso it use to be. What are we trying to accomplish for the good of meso here? Pics of his lab?

Opti, who’s done fairly respectable business for years. With no more infractions than any other source (TA’s/communication/messed up orders)

 

[iris]

you basically replied with abundance of filler words and ended up saying nothing… only that they are not finished oils from China… Stan has been sourcing for over a decade and has been very open within reasoning about his procedures and is still standing implying he isn’t breaching opsec.. DNM vendors have higher agencies after them constantly and many post pictures of their products etc and some get caught and good ones don’t so you posting lab pics and discussing your procedures isn’t going to get you caught.. what gets you caught is poor shipping, importing materials etc…

So, instead of answering questions he looks at the member's post count.
He deems that inadequate and so does not answer about lab set up and production.
Then he comes back still refusing to provide any relevant information.
If that were not shameless enough, even more shameless is members abetting this by saying "oh well, there has never been a problem, what do you want now".

I take it that for domestic sources people are not interested in gathering any meaningful information about procedures and methods of production.
So, certain sources receive preferential treatment.

In light of this, I think it would be fairer to level the playing field and stop asking questions and vetting everybody, whether they are in the US or in China, as long as there are no problems.
Just like here.

 

[Sly Devil]

I think I've seen actually atleast 10 sources show lab photos since being a member here..
Not sure what sand your head is in but take.it out see the world.

Actually here just now, these guys have lab photos even highlighted on announcements.
Gosh it's sucks when people can see through your own bs

Post in thread 'Endura Biosciences (Peptides & Steroids)'

Sep 24, 2024

Dear MESO-rx Members,

I sincerely apologize for the delay in getting back to your questions. We’ve now assigned a dedicated team member to manage MESO, and moving forward, we’re committed to continuously improving our service to ensure your satisfaction.

In the meantime, I’d like to share some photos of our peptide production facility and showcase a few of our products:




To make it easier for you to reach us, we’ve updated our...

• Endura Biosciences

Are you kidding with this? LMFAO. That is an international source. Find some lab pictures of a domestic source. What’s even more hilarious is look how clean that paper is. It’s clearly photoshopped. The fact that this would please you is concerning. I see no lab. Just some stainless steel tables and an oven.