[Source] SignatureLabs Introduction (US Domestic)

[BigBaldBeardGuy]

Well for starters, you could have had everything that you are being asked for ready before you posted anything.....

You were a member of Meso for 10 years, no? In those 10 years you didn't have ample time to figure out what would be needed of you to source and what you should have provided in your intro"

Baiting in the following way:
People get the runaround lip service when they ask to see pictures with a big spiel about your safety and your customers safety.

While the more experienced and patient members wait for you to post up everything you cash in on a few orders from people naive enough to do so before everything is in order.

You disappear, wait a bit and then resurface under a new account with a new name.

Rinse, lather, repeat.

^^^^^ He said it better than I did.

 

[SignatureLabs]

Well for starters, you could have had everything that you are being asked for ready before you posted anything.....

You were a member of Meso for 10 years, no? In those 10 years you didn't have ample time to figure out what would be needed of you to source and what you should have provided in your intro"

Baiting in the following way:
People get the runaround lip service when they ask to see pictures with a big spiel about your safety and your customers safety.

While the more experienced and patient members wait for you to post up everything you cash in on a few orders from people naive enough to do so before everything is in order.

You disappear, wait a bit and then resurface under a new account with a new name.

Rinse, lather, repeat.

No sir, I've never been a member on Meso nor did I ever claim to be. I also have posted everything that has been asked up until now within a few hours. If I took multiple days, I completely understand the skepticism. But I understand nothing I say will make a difference until I upload the photos.

 

[picholas]

No sir, I've never been a member on Meso nor did I ever claim to be. I also have posted everything that has been asked up until now within a few hours. If I took multiple days, I completely understand the skepticism. But I understand nothing I say will make a difference until I upload the photos.

My mistake on you being a previous member, that was a different new source. So I double checked your intro. After 3+ years in the industry you should still know what is expected, but even given the benefit of a doubt and say you DO provide pictures.

This alone is enough to make me never do business with you.

We sell locally and have been a private source online until this post.

Local Sourcing + Online Sales = Trouble

 

[RCCP]

The fact he doesn't know off the top of his head what type of filter a millipore uses and wants me to do the home work tells me he hasn't been brewing long and if something happens in a bind he won't know what material is appropriate for filtering and possibly pick up the wrong filter.

 

[SignatureLabs]

My mistake on you being a previous member, that was a different new source. So I double checked your intro. After 3+ years in the industry you should still know what is expected, but even given the benefit of a doubt and say you DO provide pictures.

This alone is enough to make me never do business with you.



Local Sourcing + Online Sales = Trouble

I do apologize for not providing everything off the bat. Every forum is different, and I'm use to a mod checking my claims not the entire forum. And pictures are being uploaded right now.
I do agree local and online is a bad idea, but I don't go around the gym trying to sell to random people. I have a very small group of people that I sell to locally.

 

[SignatureLabs]

The fact he doesn't know off the top of his head what type of filter a millipore uses and wants me to do the home work tells me he hasn't been brewing long and if something happens in a bind he won't know what material is appropriate for filtering and possibly pick up the wrong filter.

I'm not sure what I should say to this comment. I told you the exact filter I use, Millipore millipak filters. I can't tell you anymore then to tell you the exact filter I use.

 

[SignatureLabs]

My mistake on you being a previous member, that was a different new source. So I double checked your intro. After 3+ years in the industry you should still know what is expected, but even given the benefit of a doubt and say you DO provide pictures.

This alone is enough to make me never do business with you.



Local Sourcing + Online Sales = Trouble

bpsj6ywu.jpg
8s06bemr.jpg
p0g31fw9.jpg
l3xv94rc.jpg
0c0n3aj4.jpg
0uehi58x.jpg
tcg1trko.jpg
ztjjsibg.jpg
I use the same filters, but depending on batch size I choose what size (20,40,60) to use. Anymore questions/pictures I'll provide as promised.

 

[RCCP]

And that's the problem, you just use some random filter and keep using it, that's great you're consistent but if you don't know why something is good or bad for each steps of the operations it usless.

I've got one vial left and need a new source and I'm ready to jump but because someone doesn't know whys they do each step of a process and why each thing is choosen is why I don't drop some monies, I'm injecting this into my body so id expexts you know why everything is chosen and what not to use.

My problem may sound tirvials but I want a source I can spend thousands of dollars with and they better know whats acceptable and what isn't from temps, solvents, steriles, etc. If millipores are sold out or recalled and you simply can't buy them anywhere, what filter type are you buying? If you don't know that answer it tells me you just follow a receipe you found online or someone told you and you don'ts actually understand the brew process.

 

[SignatureLabs]

And that's the problem, you just use some random filter and keep using it, that's great you're consistent but if you don't know why something is good or bad for each steps of the operations it usless.

I've got one vial left and need a new source and I'm ready to jump but because someone doesn't know whys they do each step of a process and why each thing is choosen is why I don't drop some monies, I'm injecting this into my body so id expexts you know why everything is chosen and what not to use.

My problem may sound tirvials but I want a source I can spend thousands of dollars with and they better know whats acceptable and what isn't from temps, solvents, steriles, etc. If millipores are sold out or recalled and you simply can't buy them anywhere, what filter type are you buying? If you don't know that answer it tells me you just follow a receipe you found online or someone told you and you don'ts actually understand the brew process.

I understand that bro. Hit me up with direct questions and I can answer that. Multiple places sell the filters I use so I wouldn't have a problem if one place was out. However, if they went on recall, or simply stop making them then I would use Millipores EMD line which I love to. I found both types of filters work perfectly for my peristaltic pump, and both can filter liters of gear at a time. If Millipore stopped selling, then I would swap to Whatman capsule filters which I have also used in the past.

 

[RCCP]

Either words don't match up or you don't know what you're talkings about. maybe @picholas can translate what I'm trying to ask. picholas, when I ask you what type of filter you brew with what would you say? Milipore, millipack, EMD are all brands and streams of product.

 

[picholas]

Either words don't match up or you don't know what you're talkings about. maybe @picholas can translate what I'm trying to ask. picholas, when I ask you what type of filter you brew with what would you say? Milipore, millipack, EMD are all brands and streams of product.

PTFE hydrophobic .22um pore filter, I have about 5 Nalgene nylon bottle top filters same pore size, I'll probably end up using just to filter BAC water.

He's giving you brands, you want to know membrane type and pore size. I'm assuming?

 

[RCCP]

PTFE hydrophobic .22um pore filter, I have about 5 Nalgene nylon bottle top filters same pore size, I'll probably end up using just to filter BAC water.

He's giving you brands, you want to know membrane type and pore size. I'm assuming?

So the first person I asked understands me, and even expanded on his answers. This tells me the person understands what they are doing and how the process actually works, not just reading a receipe book on reddit.

 

[SignatureLabs]

So the first person I asked understands me, and even expanded on his answers. This tells me the person understands what they are doing and how the process actually works, not just reading a receipe book on reddit.

Sorry dude, you could of asked me what membrane type and pore size and I would of answered you when you first asked. Usually when people ask what type of filter, their asking about brand or pore size at least in my experience. I can promise you I've been trying to answer as I've always replied back to your question and never dodged it.
The membrane type is PVDF and 0.22um pore filter.

 

[SignatureLabs]

For everyone that wants to see my updated price list, these prices reflect the same prices as Versace.
UGL
Product | Price | Concentration
-------------------------------
Test E | $30 | 250mg
Test P | $20 | 100mg
Test A | $20 | 100mg
tren E | $50 | 250mg
Nand C | $45 | 250mg
EQ | $60 | 400mg
Bold C | $45 | 200mg
Halo | $45 | 40mg
cialis | $20 | 20mg
Accutane| $25 | 20mg

PHARMA
Product | Price | Concentration
-------------------------------
clomid | $55 | 50mg
nolva | $35 | 20mg
Raloxifene | $80 | 60mg
telmisartan | $55| 80mg
letrozole | $45| 2.5mg

 

[Alex Blake]

Any luck to getting an order to Canada ? And if so is it even worth the risk ?

 

[SignatureLabs]

Any luck to getting an order to Canada ? And if so is it even worth the risk ?

Sorry bro, I'm U.S. domestic only. I don't have any experience with international orders so it would be easier on you to find a Canadian source.

 

[Tristin]

I’d like to place a order with you brother

 

[BigBaldBeardGuy]

I’d like to place a order with you brother

You don’t read so well. 1) he gives you ordering instructions. 2) this source hasn’t been vetted so order at your own risk. 3) you bounce from source thread to source thread looking to order and doing the same stupid posts.

Read.

 

[SignatureLabs]

I’d like to place a order with you brother

If you would like to place an order, email me at signature-labs@tutanota.com and let me know what you need brother.

 

[T-Bagger]

If you would like to place an order, email me at signature-labs@tutanota.com and let me know what you need brother.

How much do you wanna bet the dumb fuck emails him from a gmail or yahoo account which contains his real name?