STANFORD PHARMA. DOMESTIC US. OPEN TO PUBLIC.

[D8122]

Wasn’t that form hard to watch? It’s like you can see his spine explode.

One of those that hurts to watch. I have disc trouble so I feel it while just watching.
It's amazing that the man has gotten to that point of strength with that form.

 

[Jswole220]

I don't ever remember so many people telling their illegal AAS dealer to feel better, and get well soon.

Lol seriously though. Some of these guys come off so desperately. Not that it’s a bad thing to wish someone well but if stan wasn’t a half decent source would they still be wishing him well? When the China men say they are sick and blah blah so that’s why packs are late and I can only take orders it’s always “ fuck you” “die slow” “ I hope you have aids” and so on.

 

[wedorecover]

Lol seriously though. Some of these guys come off so desperately. Not that it’s a bad thing to wish someone well but if stan wasn’t a half decent source would they still be wishing him well? When the China men say they are sick and blah blah so that’s why packs are late and I can only take orders it’s always “ fuck you” “die slow” “ I hope you have aids” and so on.

It’s because he’s a good dude Iv known him a long time now long before he ever came on this board always been a stand up guy I don’t run his stuff anymore but it was always good and he has even helped me in some bad times

 

[Stanfordpharma1]

Hey every one. I'm still alive. Thanks for all the concern. A lot of people have been inquiring on when/if i will come back. I wanna keep you guys informed as much as possible so you guys can make the appropriate decisions. My goal is to get back on my feet and open back up in about 30 days. About 3 or 4 months ago i sent a lot of product in for testing. It never made it out of US. I will be sending that back out for testing and use a different shipping method. Also, a new system will be in place to make sure t/a times and shipping issues will be fixed. So, as it stands we're looking at 30 days. I will keep you guys posted if things change.

 

[Stanfordpharma1]

Now, I'm gonna post this to help people. Take this info however you want and i don't mean to get involved in any thing other than to help the community.

This is what i would do if i had floaters and couldn't find myself to toss it.

I would need/buy

200ml beaker
60ml syringe/s
.2um syringe filter for every 80ml
Appropriate amount of sealed sterile vials.
22 gauge needles
Caulking gun
I think thats every thing

Assuming you don't have a lab, obviously.

Clean and make sure beaker is completely dry.
Draw product in syringe and inject into beaker.
Put beaker on warmer to a warm product. A hot plate preferably. Never use a water bath.

Your product is ready to filter.
You'll need to realize that the vial, the exit tip of syringe filter and needles that touch the vials will need to be sterile. The beaker and the syringe will not be sterile. Your product will be sterile as it passes through the filter.

Have needle attached to filter and a needle in vial as a vent. Use the plastic needle sleeve to cover the needle on the syringe filter needle to keep it clean when not in vial filtering.

With 60ml syringe with no needle or filter, draw product to about 45ml then place in caulking gun. Attach filter with needle to syringe and fill vials. Should get about 4 vials filled. Detach syringe filter and do again. You should get about 2 turns (80ml) out of each syringe filter before needing to switch. It will get too hard to push through.


Any questions just ask. I will do my best to answer in timely manner.

 

[Bluewhistle]

Now, I'm gonna post this to help people. Take this info however you want and i don't mean to get involved in any thing other than to help the community.

This is what i would do if i had floaters and couldn't find myself to toss it.

I would need/buy

200ml beaker
60ml syringe/s
.2um syringe filter for every 80ml
Appropriate amount of sealed sterile vials.
22 gauge needles
Caulking gun
I think thats every thing

Assuming you don't have a lab, obviously.

Clean and make sure beaker is completely dry.
Draw product in syringe and inject into beaker.
Put beaker on warmer to a warm product. A hot plate preferably. Never use a water bath.

Your product is ready to filter.
You'll need to realize that the vial, the exit tip of syringe filter and needles that touch the vials will need to be sterile. The beaker and the syringe will not be sterile. Your product will be sterile as it passes through the filter.

Have needle attached to filter and a needle in vial as a vent. Use the plastic needle sleeve to cover the needle on the syringe filter needle to keep it clean when not in vial filtering.

With 60ml syringe with no needle or filter, draw product to about 45ml then place in caulking gun. Attach filter with needle to syringe and fill vials. Should get about 4 vials filled. Detach syringe filter and do again. You should get about 2 turns (80ml) out of each syringe filter before needing to switch. It will get too hard to push through.


Any questions just ask. I will do my best to answer in timely manner.

Did this myself with some questionable product. Worked pretty slick but is kinda tedious

 

[BigBaldBeardGuy]

Now, I'm gonna post this to help people. Take this info however you want and i don't mean to get involved in any thing other than to help the community.

This is what i would do if i had floaters and couldn't find myself to toss it.

I would need/buy

200ml beaker
60ml syringe/s
.2um syringe filter for every 80ml
Appropriate amount of sealed sterile vials.
22 gauge needles
Caulking gun
I think thats every thing

Assuming you don't have a lab, obviously.

Clean and make sure beaker is completely dry.
Draw product in syringe and inject into beaker.
Put beaker on warmer to a warm product. A hot plate preferably. Never use a water bath.

Your product is ready to filter.
You'll need to realize that the vial, the exit tip of syringe filter and needles that touch the vials will need to be sterile. The beaker and the syringe will not be sterile. Your product will be sterile as it passes through the filter.

Have needle attached to filter and a needle in vial as a vent. Use the plastic needle sleeve to cover the needle on the syringe filter needle to keep it clean when not in vial filtering.

With 60ml syringe with no needle or filter, draw product to about 45ml then place in caulking gun. Attach filter with needle to syringe and fill vials. Should get about 4 vials filled. Detach syringe filter and do again. You should get about 2 turns (80ml) out of each syringe filter before needing to switch. It will get too hard to push through.


Any questions just ask. I will do my best to answer in timely manner.

If you don’t mind I would like to copy and paste this where it needs to be posted.

 

[Stanfordpharma1]

If you don’t mind I would like to copy and paste this where it needs to be posted.

Not a problem.

 

[TNotch347]

If you don’t mind I would like to copy and paste this where it needs to be posted.

You most definitely should, it’s great advice on the right way to do it.

 

[BigBaldBeardGuy]

Not a problem.

Thanks. I posted it but didn’t mention which specific thread I cut and pasted from. They’ll figure it out eventually anyhow but I didn’t want to start another drama.

Good looking out though.

 

[justanoob]

Now, I'm gonna post this to help people. Take this info however you want and i don't mean to get involved in any thing other than to help the community.

This is what i would do if i had floaters and couldn't find myself to toss it.

I would need/buy

200ml beaker
60ml syringe/s
.2um syringe filter for every 80ml
Appropriate amount of sealed sterile vials.
22 gauge needles
Caulking gun
I think thats every thing

Assuming you don't have a lab, obviously.

Clean and make sure beaker is completely dry.
Draw product in syringe and inject into beaker.
Put beaker on warmer to a warm product. A hot plate preferably. Never use a water bath.

Your product is ready to filter.
You'll need to realize that the vial, the exit tip of syringe filter and needles that touch the vials will need to be sterile. The beaker and the syringe will not be sterile. Your product will be sterile as it passes through the filter.

Have needle attached to filter and a needle in vial as a vent. Use the plastic needle sleeve to cover the needle on the syringe filter needle to keep it clean when not in vial filtering.

With 60ml syringe with no needle or filter, draw product to about 45ml then place in caulking gun. Attach filter with needle to syringe and fill vials. Should get about 4 vials filled. Detach syringe filter and do again. You should get about 2 turns (80ml) out of each syringe filter before needing to switch. It will get too hard to push through.


Any questions just ask. I will do my best to answer in timely manner.

Thank you for posting this, and I’m glad to hear all is well. and thank you @BigBaldBeardGuy for cross posting. It’s nice to have everyone looking out for one another

 

[HIGHRISK]

It’s because he’s a good dude Iv known him a long time now long before he ever came on this board always been a stand up guy I don’t run his stuff anymore but it was always good and he has even helped me in some bad times

Well well looky here. What’s man haven’t seen you in forever. Hope everything is good with you.

 

[penche]

Not a problem.

Wish you the best SP, in regards to your health.

 

[Jswole220]

It’s because he’s a good dude Iv known him a long time now long before he ever came on this board always been a stand up guy I don’t run his stuff anymore but it was always good and he has even helped me in some bad times

Well In your case I’m not really directing my comment towards you considering it seems you know stan personally. Your doing what a good friend does. It was directed towards the desperate gear addicts who can’t fathom life with meso loosing another ugl

 

[wedorecover]

Well In your case I’m not really directing my comment towards you considering it seems you know stan personally. Your doing what a good friend does. It was directed towards the desperate gear addicts who can’t fathom life with meso loosing another ugl

Never met him in person just talked to him for many years always been good to me I still to this day just check in on him

 

[wedorecover]

Well well looky here. What’s man haven’t seen you in forever. Hope everything is good with you.

I’m good brother been out of the gym like 2 years or some shit just got back in for about 5 months I was being a psycho but I went and got some help never been happier now

 

[wedorecover]

Well In your case I’m not really directing my comment towards you considering it seems you know stan personally. Your doing what a good friend does. It was directed towards the desperate gear addicts who can’t fathom life with meso loosing another ugl

It is rare u will meet a dude like him ... a man of his word is hard to find anywhere for that matter

 

[GrowingSeason36]

@StanfordPharma come back stocked because I can guarantee you are gonna be busy... the few trusted domestic options left are all gonna be getting crushed.

 

[wedorecover]

Wait a min here Iv been sucking stanny dick way longer then all y’all lol @StanfordPharma I remember you before you even had flip caps when you had different labels ..... when u would make crazy gear inventions and I’d try them bitches out.... me and frank the tank ..... I’m pretty sure I posted the first Stanford bloods on Meso and got railed for it ... any way I hope u get better brother you have been fighting this a long time man

 

[Stanfordpharma1]

@StanfordPharma come back stocked because I can guarantee you are gonna be busy... the few trusted domestic options left are all gonna be getting crushed.

Part of the reason return date will be about a month. Everything will be very stocked. I don't want to chase my tail again.