Valiant labs

[Silentlemon1011]

I get it. I watch you guys make clear, valid points, only for some new account or shill come in and start bitching, ignoring the fact that you guys are just trying to help. It’s frustrating to watch, so i can only imagine what it’s like to waste the time posting when 75% of your audience is as dumb as a fucking wall.

But like I said, there are people that may or may not have accounts here. that watch and respect how you guys vet, and make decisions based off that outcome. It is definitely what set this place apart from other forums in my opinion.

Maybe you’ll stay on the sideline, maybe you’ll get bored of watching meso go to shit and decide to jump in again. If you do, fuck the people that disagree. Voice your opinion, or point out what’s wrong with the situation, but then let it be. Let people make their own decisions. Don’t waste time arguing with people, the dumb ones aren’t with it, and the smart ones will likely listen.

Either way just know you and all the vets are appreciated by people that actually take this seriously.

Not gonna lie
It's pretty fucking disheartening when I spend months trashing a source and calling them out..

Then the next post is "Got my gear, super fast source was responsive... cant wait to pin and make gains"

It's like.... what the fuck?
Why did I bother?

There are a lot of guys who dont post, ALOT
and I've actually gotten a good bit of PMs with guys saying "Thanks for that shit, didnt knownhe was a scammer" etc.

Fuck i almost gave up vetting about 6 months ago and @BigBaldBeardGuy ended up talking me down

 

[Frozen]

I pulled the thread up and started reading and I the I was in trips thread lmao

 

[muscletrain]

What a fucking joke I knew it was a thread bump when he just asks where to post them. Ok buddy how about you just fucking post it.

This lab can't even put real photos on their website its all the same generic fake 3D vial for their products.

for anyone too lazy to read 20 posts

DO NOT ORDER FROM THIS SOURCE THEY HAVE NOT POSTED ANY LABS OR COMPLIED WITH ANY REQUESTS. MUCH BETTER OPTIONS IN THE USA.

 

[shackleford]

i asked another member if the vetting questions helped him decide if a source was his best option. Essentially, it was price that was the only mentioned factor influencing his decision. Not what I hoped to hear, but I am thankful for the honest answer. I'm not sure if it really is making a difference, badgering these sources to provide proof of accurately dosed product, cleanliness, stock, etc. It is discouraging to say the least.

 

[BigBaldBeardGuy]

i asked another member if the vetting questions helped him decide if a source was his best option. Essentially, it was price that was the only mentioned factor influencing his decision. Not what I hoped to hear, but I am thankful for the honest answer. I'm not sure if it really is making a difference, badgering these sources to provide proof of accurately dosed product, cleanliness, stock, etc. It is discouraging to say the least.

It makes ZERO difference. These guys don't give a fuck. They get lured in by the "good enough" and "the guy was easy to deal with during the ordering process".

Open up Sodom and Gomorrah and let the guys learn the hard way.

 

[MisterSuperGod]

It makes ZERO difference. These guys don't give a fuck. They get lured in by the "good enough" and "the guy was easy to deal with during the ordering process".

Open up Sodom and Gomorrah and let the guys learn the hard way.

Exactly. i'm too old to be holding peoples hands anymore. If anyone reading is really concerned with their own health and the legitimacy of a source, they're all free to sign up to the forum and question their potential source until their blue in the balls.

If they're too stupid, fat and lazy to ask the important questions, that's on them. Just like with the stupid mask debate. Your health is your responsibility, not mine.

 

[BigBaldBeardGuy]

Exactly. i'm too old to be holding peoples hands anymore. If anyone reading is really concerned with their own health and the legitimacy of a source, they're all free to sign up to the forum and question their potential source until their blue in the balls.

If they're too stupid, fat and lazy to ask the important questions, that's on them. Just like with the stupid mask debate. Your health is your responsibility, not mine.

I'm just curious to see if Prince Valiant seizes this opportunity

 

[justanoob]

I'm just curious to see if Prince Valiant seizes this opportunity

I truly think valiant is to lazy and probably to high to even consider seizing any opportunity right now.

 

[fooba]

someone get @ValiantRep to tell his boss to come back

 

[SkankHunt]

I truly think valiant is to lazy and probably to high to even consider seizing any opportunity right now.

Nah he’s probably got photoshop open and he’s trying to finagle Janos report lol.

 

[MindlessWork]

someone get @ValiantRep to tell his boss to come back

@ValiantRep must have his mouth full.

 

[MindlessWork]

Nah he’s probably got photoshop open and he’s trying to finagle Janos report lol.

Or scurrying to find pics of generic lab equipment.

 

[BigBaldBeardGuy]

@ValiantRep must have his mouth full.

There is no @ValiantRep anymore. They broke up a couple weeks ago.

 

[MindlessWork]

There is no @ValiantRep anymore. They broke up a couple weeks ago.

Aw shucks LOL.

 

[valiant]

Ok. So here is some pictures of the labs and the jano results. one result the eq300 was mixed up for deca so it isnt included. I am sending 5 more samples to him as we speak. I want to get all compounds done. hopefully on monthly or bi monthly basis. we had tested

Test e 250
tren a 100

the pictures I Included were inside one of the rooms of the lab, flow hood, autoclave, pump, hot plate, and a grumpy emplyee. We didnt include my manafold that I still use with pumps because they were baking to sterilize for use. also is our fumex that filters the air in the clean rooms. I didnt time stamp that by accident but I will if need be. The room itself is sealed and coated in plastic sheeting including the air sealed door with zipper that we spray with alcohol during entry and exiting to keep the room sterile. as do we spray down the tables and equitment the fumex and flow hood does the rest. I hope this finally is sufficient enough and meets meso standards

50-F53-DE1-4-E42-4077-973-E-079394109-B5-A
autoclave
CC27-C9-E5-37-B7-4-DC3-8-BC2-33400-E88-F40-B
EE366-DBB-559-B-4253-A0-DA-A5-A143-C4-A46-E
flowhood
labwrk
labwrk2
Test-Report-teste250
Test-Report-trena

 

[valiant]

you forgot to make a reference to trips thread for the sarcasm.. some people might not get it and take you for serious

i get it if a source doesnt want to post bad results, or doesnt want to say hey i screwed up. But i'd rather deal with someone honest and willing to make positive changes, than someone being deceitful, everyone makes mistakes. Meso is pretty quick to sniff out bullcrap, im just trying to give them a chance to do right first.

Just didnt want to keep dragging it on and wanted to adress it all at once. soon as the jano results came in I did what I said you guys are tough lol but i applaud you members and this whole community.

 

[valiant]

@valiant is doing the best he can. Give him time. You guys expect far too much from these sources. Most guys are just happy with gear in the mail. They don't want to get scammed. Valiant is fine. Quit hassling him so much. We need more sources around here.

Thank you sir

 

[fooba]

Ok. So here is some pictures of the labs and the jano results. one result the eq300 was mixed up for deca so it isnt included. I am sending 5 more samples to him as we speak. I want to get all compounds done. hopefully on monthly or bi monthly basis. we had tested

Test e 250
tren a 100

the pictures I Included were inside one of the rooms of the lab, flow hood, autoclave, pump, hot plate, and a grumpy emplyee. We didnt include my manafold that I still use with pumps because they were baking to sterilize for use. also is our fumex that filters the air in the clean rooms. I didnt time stamp that by accident but I will if need be. The room itself is sealed and coated in plastic sheeting including the air sealed door with zipper that we spray with alcohol during entry and exiting to keep the room sterile. as do we spray down the tables and equitment the fumex and flow hood does the rest. I hope this finally is sufficient enough and meets meso standards

50-F53-DE1-4-E42-4077-973-E-079394109-B5-A
autoclave
CC27-C9-E5-37-B7-4-DC3-8-BC2-33400-E88-F40-B
EE366-DBB-559-B-4253-A0-DA-A5-A143-C4-A46-E
flowhood
labwrk
labwrk2
Test-Report-teste250
Test-Report-trena

can you explain your brewing process and why your test e is 10% overdosed while tren a is at a 5%? was it because you didnt get your raws tested before brewing?

ill let other members comment on the lab photos since idk about them. but can you also explain why the number 30 on the paper in the lab pics looks like its edited/written over?

 

[MisterSuperGod]

Your EQ is Deca and your Test E is way off label claim? Good enough for me. Welcome aboard.

We have ton of hungry idiots that are eager to buy, give glowing reviews before even using what they bought and are willing to white knight for you, as long as you don't rip them off and get their packs to them within 7 days.

Keep that in mind and you'll go far. Good luck.

 

[valiant]

can you explain your brewing process and why your test e is 10% overdosed while tren a is at a 5%? was it because you didnt get your raws tested before brewing?

ill let other members comment on the lab photos since idk about them. but can you also explain why the number 30 on the paper in the lab pics looks like its edited/written over?

That’s how I brewed tren as it’s easier not to crash. For a while people liked my tren true dosed.