Extraction needle

[Super_Mario]

Hello dear friends,

I’m a beginner steroid user. I’ve been injecting since September 2023. I’m wondering if it’s okay to reuse the extraction needle like for 5 times or so. It’s clear to me that you cannot reuse the injection needle, I hope I don’t get misunderstood.

 

[rockyraccoon]

Is it possible? Sure, but there's still a chance of introducing bacteria. Needles are cheap. Just buy more.

 

[Nilatac]

I wouldn't do that.

 

[accidentaljedi173]

I wouldn't do that.

Would it be advisable to change the extraction needle in between loading different compounds into the same needle?

 

[Black90tsi]

Would it be advisable to change the extraction needle in between loading different compounds into the same needle?

I don't. I'm currently using 3 different oils at once. I line them all up, clean the top of each and use a fresh barrel & tip to draw it all up into the barrel. At which point i remove the drawing tip and install the smaller gauge tip i'll be using to inject. If you're paranoid it's literally like .12 or less per swappable tip.

 

[Nilatac]

Would it be advisable to change the extraction needle in between loading different compounds into the same needle?

I drawn with the same needle from multiple vials but I don't use that needle next day when I draw oils for other injection.
Next day when I do another injection I use another new needle to draw the oil.

 

[accidentaljedi173]

I don't. I'm currently using 3 different oils at once. I line them all up, clean the top of each and use a fresh barrel & tip to draw it all up into the barrel. At which point i remove the drawing tip and install the smaller gauge tip i'll be using to inject. If you're paranoid it's literally like .12 or less per swappable tip.

I'm not paranoid or concerned about any of it. Just never done multiple compounds before and wasn't sure of the proper protocol.

Sorry for hi-jacking the thread op

 

[readalot]

Hello dear friends,

I’m a beginner steroid user. I’ve been injecting since September 2023. I’m wondering if it’s okay to reuse the extraction needle like for 5 times or so. It’s clear to me that you cannot reuse the injection needle, I hope I don’t get misunderstood.

No. Buy some insulin pins and inject with same needle you draw with. Dirt cheap. No residual gear lost.

Learn proper aseptic technique. Wipe everything with alcohol prep pads.

 

[Alpha1Wolf]

For how cheap needles are, never reuse any of needles. Though I do use same extraction needle when drawing multiple compounds at once. Use large gauge needle for extraction, and thinner needle for injection. Been on TRT and cycles for few years now, haven't had an issue yet.

 

[Super_Mario]

For how cheap needles are, never reuse any of needles. Though I do use same extraction needle when drawing multiple compounds at once. Use large gauge needle for extraction, and thinner needle for injection. Been on TRT and cycles for few years now, haven't had an issue yet.

For me the only problem was, that since September I bought needles from local pharmacies. The prices varied most times they charge 2,50€ for 10 needles which is ridiculous, because it’s only 5 injections. I inject two times a week mon/morning and thurs/evening that’s like at least 4 needles per week, if anything goes as planned. I was just thinking of a way to minimize the cost because it was around 10€ a month maybe even more in 5 months i spent like fucking 60€ on needles my brazza. Just wanted to explain so people don’t think that I’m broke and need to reuse needles lmao. Literally just ordered 100 needles for 2,50€. Didn’t know they’re so f cheap on the internet.

 

[Super_Mario]

I don't. I'm currently using 3 different oils at once. I line them all up, clean the top of each and use a fresh barrel & tip to draw it all up into the barrel. At which point i remove the drawing tip and install the smaller gauge tip i'll be using to inject. If you're paranoid it's literally like .12 or less per swappable tip.

Did I understand right that you can draw multiple compounds in one syringe and inject them all at once in the same injection spot? Like for example test,eq and a dht derivative all at once?

 

[Cyp180]

Hello dear friends,

I’m a beginner steroid user. I’ve been injecting since September 2023. I’m wondering if it’s okay to reuse the extraction needle like for 5 times or so. It’s clear to me that you cannot reuse the injection needle, I hope I don’t get misunderstood.

Needles cost about 5,- euro for 100.....

 

[Alpha1Wolf]

For me the only problem was, that since September I bought needles from local pharmacies. The prices varied most times they charge 2,50€ for 10 needles which is ridiculous, because it’s only 5 injections. I inject two times a week mon/morning and thurs/evening that’s like at least 4 needles per week, if anything goes as planned. I was just thinking of a way to minimize the cost because it was around 10€ a month maybe even more in 5 months i spent like fucking 60€ on needles my brazza. Just wanted to explain so people don’t think that I’m broke and need to reuse needles lmao. Literally just ordered 100 needles for 2,50€. Didn’t know they’re so f cheap on the internet.

Imma tell you though: Use cheap needles for extraction, but get better ones for injection. Ive been using nipro. these are not expensive, but they do the job well.

 

[Alpha1Wolf]

Did I understand right that you can draw multiple compounds in one syringe and inject them all at once in the same injection spot? Like for example test,eq and a dht derivative all at once?

I guess it would depend on how much volume you injecting. From my personal experience: Test+EQ+ deca total 1.5ml all in one syringe. used one needle to draw, another to inject into a quad or ventro. Anything pass 1 ml becomes somewhat uncomfortable, but 1.5ml was still manageable for me.

 

[readalot]

This or equivalent...

MHC Easy Touch U100 Syringes, EasyTouch

Easy Touch U100 syringes by MHC Medical offer smooth injections, sharp precision, and easy dosing at an affordable price, trusted quality for diabetes care

medicinalsupplies.com

27g or 29g depending on your patience level. Almost no dead volume and 15 to 17 US cents per pin.

 

[Alpha1Wolf]

This or equivalent...

MHC Easy Touch U100 Syringes, EasyTouch

Easy Touch U100 syringes by MHC Medical offer smooth injections, sharp precision, and easy dosing at an affordable price, trusted quality for diabetes care

medicinalsupplies.com

27g or 29g depending on your patience level. Almost no dead volume and 15 to 17 US cents per pin.

Imma hijack this thread for a minute: I always wanted to try Slim pin for injections, but kinda goes against everything i know, hope u can give me some insight: 1. 1/2 needle- does it reach the muscle. which area do you inject? few times i injected too shallow, it caused serious PIP, i suspect from leaking into the sub Q layers. 2. Do you backload or is the needle on these pins sharp enough to use same needle for loading and injecting? Definitely wouldn't be sharp enough to load 2-3 compounds and inject after, right?

 

[readalot]

Imma hijack this thread for a minute: I always wanted to try Slim pin for injections, but kinda goes against everything i know, hope u can give me some insight: 1. 1/2 needle- does it reach the muscle. which area do you inject? few times i injected too shallow, it caused serious PIP, i suspect from leaking into the sub Q layers. 2. Do you backload or is the needle on these pins sharp enough to use same needle for loading and injecting? Definitely wouldn't be sharp enough to load 2-3 compounds and inject after, right?

Great questions.

1. Yeah I could see where that may vary with bodyfat level. I do VG/DG and rarely shoulder. Half inch more than enough to reach muscle. You can do the pinch test to see.

2. Use same pin to load and inject. One compound per pin. I have loaded from 2 vials and pinned that no issue as well. But you are correct that needle will dull. Some cool micrographs on the web of needle dulling after 1, 2, 3 draws. Best to use 1 pin per compound/vial.

3. Saves on AAS loss and needle guage is small enough to really save on tissue wear and tear.

4. Once you get really good at pinning and the site is worn in you can hardly tell you just injected the site. Yeah every once in a while you will nick a small vein. Hence best practice is to always apply pressure to site for 10 sec after you pull out the needle.

 

[roofer22]

Imma hijack this thread for a minute: I always wanted to try Slim pin for injections, but kinda goes against everything i know, hope u can give me some insight: 1. 1/2 needle- does it reach the muscle. which area do you inject? few times i injected too shallow, it caused serious PIP, i suspect from leaking into the sub Q layers. 2. Do you backload or is the needle on these pins sharp enough to use same needle for loading and injecting? Definitely wouldn't be sharp enough to load 2-3 compounds and inject after, right?

I use them to pierce a couple vials and still inject with the same needle. It's not the same as a virgin needle but it's okay. For example Dragons Blood and NAD I'll draw into a 28 gauge and pin it in one shot. That's a subQ water based shot though.

 

[Alpha1Wolf]

Thanx for that. Ventro injection, what about quads? I dont think i/m flexible enough to reach my DG. As long as i get MCT oil compound , should be thin enough to go through 27G slim pin, right? Not concern about injecting , but drawing into 27G could be a pain. Slim Pins should be really good for TRT ppl, as they inject small volumes , couple times a week, for literally rest of their lives.

 

[readalot]

Thanx for that. Ventro injection, what about quads? I dont think i/m flexible enough to reach my DG. As long as i get MCT oil compound , should be thin enough to go through 27G slim pin, right? Not concern about injecting , but drawing into 27G could be a pain. Slim Pins should be really good for TRT ppl, as they inject small volumes , couple times a week, for literally rest of their lives.

I don't mess with my quads. Bless those that do. Way too many nerves. Look up nerve distribution through the quads. Also very vascular. VG is easy and efficient. Couple of minutes to load up 0.5 to 0.75 ml. Some may not have patience. I'll take that over larger bore needle.

My pleasure.

https://img.grepmed.com/uploads/2963/dermatomes-dermatomal-diagnosis-cutaneous-anatomy-original.jpeg