BigBearLabs
Subscriber
Yes I’m 100% sure as I ordered a lot of extra they can only do 1000ml through the filter
MESO-Rx
Anabolic Steroids
Big Bear Labs U.S. Domestic
- Thread starter BigBearLabs
- Start date
Villain
Member
Care to share the link? You’re saying the filter is in the actual tube itself? Forgive me for doubting you, but that doesn’t seem right and definitely doesn’t sound right that it can filter 1000mL if it’s in the tube.
BigBearLabs
Subscriber
I bought it through my source feel free to pm me and I can help you
Where’s that flow hood that you promised since mid-January?
Total hack. Who in their right mind would order from you based on this setup.
You suck! Go away and stop being a total embarrassment. Go plunk down a $1,000 and advertise on BoP or ASF. Put anything in a vial and they’ll suck on your dick to get it. MESO has standards and you don’t come anywhere close to meeting those standards.
Your thread is DEAD until you come along and bump it. Not a customer posting but YOU bumping it. That’s pathetic.
BigBearLabs
Subscriber
I have customers they just don’t post. Again I’ve ordered everything but there have been delays. If you ordered from China during this outbreak of Coronavirus. Companies have been locked down.
Your customers are frauds. You posted the pictures of your "lab" and no one is going to order again. You should have just stayed away. No go away for good.
BigBearLabs
Subscriber
I have customers they just don’t post. Again I’ve ordered everything but there have been delays. If you ordered from China during this outbreak of Coronavirus. Companies have been locked down.
@BigBearLabs I’m going to approach you here in a more nicer way and hopefully it makes you understand and comprehend a little better. So here goes... 
There is absolutely no shame with you being a amateur brewer. But that’s exactly what you are man. An average homebrewer, and now you have proven that.
The section of Meso you should be posting in is the ‘Homebrewing Section’. Maybe you’re just confused. Dude, this is the underground section
What is shameful though is trying to source here while being that “amateur brewer”. You have been advised many times that you are not ready but you persist to move forward. By doing that you have shown how amateur you really are.
So correct me here if I’m wrong....
Disposable autofil bottle top filter... $19
Crimpers and rubber stoppers and flip top caps 100ct...$50
Let’s say 100 vials... $45
Manual brake bleeder... $25
I mean a really good crimper alone will cost you more than all the stuff I listed combined.
My point is; sigh; Like a child, you just don’t listen! You want to do it your way and by doing it your way all you’ve shown is how green you really are. Nothing more.
Nothing wrong with your setup for personal usage bro, but you are an accident just waiting to happen on the bigger scale. The volume you can produce with that setup alone, is a big problem, when you’re trying to source in the big leagues man. Not to mention everything else it takes to be a source.
You’re trying to walk, and you haven’t even started to crawl yet. Hell you are just starting to roll around.
Anyone can brew, but not everyone can be a source!!
Frankly, as @BigBaldBeardGuy said so delicately, Meso has standards. Meso members only deserve the best in every aspect when it comes to sources. You’re nowhere near becoming a legit source right now.
Some Words of encouragement...
continue doing what you’re doing but do it outside of Meso. Continue working on your craft and eventually implement things into your operation to a more professional type lab.
We’re talking about people’s lives here bro (like health, finances, security, ect..).
Take your time and stop trying to rush this shit!
Like I said, you gotta roll around before you crawl, and crawl before you walk. Right now you’re just rolling around...
As before, I’m betting you won’t listen and that you’ll say that you are going to continue on here. So I’ll just add one last thing, if you do, I won’t be as pleasant posting in this thread moving forward!
There is absolutely no shame with you being a amateur brewer. But that’s exactly what you are man. An average homebrewer, and now you have proven that.
The section of Meso you should be posting in is the ‘Homebrewing Section’. Maybe you’re just confused. Dude, this is the underground section
What is shameful though is trying to source here while being that “amateur brewer”. You have been advised many times that you are not ready but you persist to move forward. By doing that you have shown how amateur you really are.
So correct me here if I’m wrong....
Disposable autofil bottle top filter... $19
Crimpers and rubber stoppers and flip top caps 100ct...$50
Let’s say 100 vials... $45
Manual brake bleeder... $25
I mean a really good crimper alone will cost you more than all the stuff I listed combined.
My point is; sigh; Like a child, you just don’t listen! You want to do it your way and by doing it your way all you’ve shown is how green you really are. Nothing more.
Nothing wrong with your setup for personal usage bro, but you are an accident just waiting to happen on the bigger scale. The volume you can produce with that setup alone, is a big problem, when you’re trying to source in the big leagues man. Not to mention everything else it takes to be a source.
You’re trying to walk, and you haven’t even started to crawl yet. Hell you are just starting to roll around.
Anyone can brew, but not everyone can be a source!!
Frankly, as @BigBaldBeardGuy said so delicately, Meso has standards. Meso members only deserve the best in every aspect when it comes to sources. You’re nowhere near becoming a legit source right now.
Some Words of encouragement...
continue doing what you’re doing but do it outside of Meso. Continue working on your craft and eventually implement things into your operation to a more professional type lab.
We’re talking about people’s lives here bro (like health, finances, security, ect..).
Take your time and stop trying to rush this shit!
Like I said, you gotta roll around before you crawl, and crawl before you walk. Right now you’re just rolling around...
As before, I’m betting you won’t listen and that you’ll say that you are going to continue on here. So I’ll just add one last thing, if you do, I won’t be as pleasant posting in this thread moving forward!
BigBearLabs
Subscriber
Feel free to say whatever you guys haven’t been pleasant to begin with. Sourcing here has never been easy which is a good thing to a degree but the set up has no flaw as far as product/potency/sterility. The things that are important. As far as being able to keep up with demand, that’s a concern for me not for you to worry about. A good source doesn’t need to spend thousands, a good source needs to aware of the safety concerns and provide a product that people can use safely/effectively. I provide that. No one has asked you to buy from me and honestly buying a more expensive crimper, doesn’t make it crimp better.
You are one dense motherfucker.
@bolder phrased it as nicely as humanly possible yet you still chose to ignore him.
You’re a hack. I can do what you do and I’m a total ADHD spaz when it comes to that sort of thing. Which is why I feel more comfortable using a good source than brew myself. I care about my health. Give me one fucking reason why anyone should purchase from you. Just one.
Look at the photos you posted yesterday. Does that make you PROUD? If it does, then you need professional help. That’s fucking disturbing.
Just because you can brew DOES NOT mean you’re a source. And that’s evident by the lack of customers that you have. Bullshit they don’t post. They don’t post because they don’t exist. You’ve only had gearwhores hit you up so far - yea, the ones that asked for deep discounts or freebies in return for a review. That’s why the 3 or 4 that posted aren’t posting for you anymore.
Like @bolder suggested, go sell somewhere else for a year, put your profits into upgrading your equipment and not into empty bullshit promises and excuses. Then when you have everything you need come back and try again.
That’s nice advice. You won’t follow it because you’re a paste-eater so if you chose to stay here, I’ll be happy to keep you company in this shithole thread. I’ll move my couch in over next to your stainless steel workbench. It looks like you got room there. This is gonna be fun, homie. I got nothing else to do with the corona lockdown. [emoji12][emoji106]
Edit: damnit @bolder your emojis fell down into my post. Can you clean that shit up. Me and @BigBearLabs are trying to keep our “lab” clean you know!
BigBearLabs
Subscriber
Keep me company no ones fretting over you.
That’s only because nobody gives a fuck about this thread
Are you going to give me a hand with this couch or not?
* sliding couch across the linoleum tiles. That scratch was there before I started. Screeeeeach...
iGone
Member
I'm curious as to what's stopping you from taking a step back and doing things right. Not only for your own benefit, but the benefit of all of the members of this board.
Is it pride? Is it ignorance?
Good domestic sources are hard enough to come by, and it feels like almost like you're mocking us with this shit.
I seriously don't understand the thought process of "fuck it, what I'm making is good enough" rather than "I want to make my product better".
Is it pride? Is it ignorance?
Good domestic sources are hard enough to come by, and it feels like almost like you're mocking us with this shit.
I seriously don't understand the thought process of "fuck it, what I'm making is good enough" rather than "I want to make my product better".
BigBearLabs
Subscriber
Explain to me where the product isn’t good enough? The only issue I see here is that people are upset I haven’t spent more money on things that don’t necessarily need to be to produce product. I have a dispenser/filter on the way that’s the only major upgrade. What else would you like me to buy that would effectively increase my products appeal? It’s sterile and dosed correctly if it doesn’t help increase either I’d be investing more money which would then be passed on so an increase of prices as well.
Villain
Member
You said you were getting a flow vent hood right? Honestly, have a look at SymBiotic’s setup. That thing only falls short of an actual inspection to qualify as a clean room.
I am lost for words here. WTF did I just see and read from this clown. @BigBearLabs just STOP now. If any ass wipe from this board orders from you it's probably the same guy that takes his wife and four kids to Walmart right to shop and get out of the house.
These people need to be taken out of the gene pool for God's sake.
mands
These people need to be taken out of the gene pool for God's sake.
mands
BigBearLabs
Subscriber
Dispenser and flow hood. Those are the only planned upgrades until getting a capsule machine or tablet machine haven’t decided which route I’ll go.
Villain
Member
Man, I would not bother with tablets.
If your sourcing here you being able to keep up with demand ( assuming you actually had one which you obviously don’t ) is of great concern to any member here with a brain. Guys like you are clearly just in it for the money and theirs nothing wrong with that however if you can’t keep up with demand that’s when mistakes and shady practices start taking place. That’s when you start rushing to pump out product and potentially skipping steps or making mistakes. Theirs also a possibility you start doing shady stuff on purpose to keep up with demand and no I’m not going to say what because you’ve already proven time and time again your not trust worthy and I do t want to give you any ideas or put the thoughts in your head.
Similar threads
