Blackbird Pharma
Subscriber
Hello MESO, we are Blackbird Pharma! A new manufacturer and vendor of AAS and PCT products.
We strive to produce our products of the highest quality and safety in mind of the end user. Our recipes are tailored to every compond to use the least amount of solvents possible, while keeping the solution stable in cool environments. We do not use inflammatory carrier oils and solvents and we are transparent of the ingredients used in our every product.
Our work ethics:
1. Every work surface and tool is wiped clean using isopropyl alcohol.
2. We wear nitrile gloves and respirator masks. We wipe our gloves with isopropyl alcohol before and during production to ensure the sterility of our product.
3. Filtering and bottling steps are conducted inside a laminar flow cabinet equipped with a medical grade H14 HEPA filter.
4. Every container is cleaned using zero additive dish soap, rinsed with 97% ethanol, sterilized in an autoclave and finally dried in a laminar flow cabinet.
5. Our raws and dry ingredients are stored in a dry, moisture controlled environment. All of the ingredients and finished product is stored in a controlled room temperature and protected from UV light.
Our production:
We source our raws only from the most reputable source. Well known and highly regarded in this community.
Injectable steroids -
1. Our chosen carrier oils and solvents are non-inflamatory and do not cause excessive pip (from personal experience, 3ml glute shots are pip free).
We dose benzyl alcohol at quantities used by phamaceutical companies, and benzyl benzoate only just enough to hold the active ingredient at 4°C.
We use MCT carrier oil for our short acting ester injectable steroids, avocado carrier oil for our medium acting esters and castor carrier oil for our long acting esters.
2. We sterilize our containers and tools (made of heat-resistant and non-reactive materials). In the mean time we calculate and weigh out the ingredients for the batch.
3. We heat up and mix the solution on a magnetic stir hotplate until everything is dissolved. We monitor the temperature of the solution with a thermometer. We heat the mixture up only to the melting point of the active ingredient, afterwards we quickly cool it to room temperature.
4. Then we sterilize the vacuum filtration aparatus and the 0.22 µm filter membrane, and proceed to vacuum filter the solution insde of the laminar flow cabinet.
5. The glass vials and butyl rubber stoppers are sterilized in a 97% ethanol bath and dried in the laminar flow cabinet.
6. The filtered solution is bottled inside of the laminar flow cabinet, with each bottle filled to containin 10.5 ml of the final product, and then capped.
7. Then we label the bottles, apply the security code sticker and box them.
Oral steroids and PCT -
1. We grind the active ingredient in to a fine powder and measure the necessary weight of the pharmaceutical grade microcrystalline cellulose filler at a pre-calculated weight ratio.
2. The active ingredient is then poured in a non-reactive container along with the microcrystalline cellulose filler at a 1:1 ratio. Mixed together by shaking and swirling the container. Then the steps of 1:1 dilution and mixing are repeated until the calculated ratio of active ingredient and filler are reached, ensuring the calculated dose is reached and the mixture is homogeneous. Silica gel pouches are placed in the container for moisture control.
3. Then we fill gelatin capsules with the prepared mixture using a manual capsule filling machine. The powder is tapped to ensure each capsule is filled properly.
4. We label the mylar foil pouches and apply the security code stickers.
5. The prepared capsules are filled in the pouches (100 caps for oral steroids, 50 caps for PCT). The pouches are then heat-sealed.
Our current product lineup:
Injectable Steroids -
Boldeno UD250 (Boldenone Undecylenate 250 mg/ml, 10 ml vial)
Mastero P100 (Drostanolone Propionate 100 mg/ml, 10 ml vial)
Nandro D250 (Nandrolone Decanoate 250 mg/ml, 10 ml vial)
Nandro PP100 (Nandrolone Phenylpropionate 100 mg/ml, 10 ml vial)
Primo E100 (Metenolone Enanthate 100 mg/ml, 10 ml vial)
Testo C200 (Testosterone Cypionate 200 mg/ml, 10 ml vial)
Testo E300 (Testosterone Enanthate 300 mg/ml, 10 ml vial)
Testo P100 (Testosterone Propionate 100 mg/ml, 10 ml vial)
Testo UD200 (Testosterone Undecanoate 200 mg/ml, 10 ml vial)
Trenbo A100 (Trenbolone Acetate 100 mg/ml, 10 ml vial)
Trenbo E200 (Trenbolone Enanthate 200 mg/ml, 10 ml vial)
Oral Steroids -
Anadro10 (Oxymetholone 10 mg/capsule, 100 capsules)
Anavaro10 (Oxandrolone 10 mg/capsule, 100 capsules)
Dianabo10 (Methandienone 10 mg/capsule, 100 capsules)
Turinabo10 (Chlorodehydromethyltestosterone 10 mg/capsule, 100 capsules)
Winstro10 (Stanozolol 10 mg/capsule, 100 capsules)
PCT & Anti Estrogen -
Anastro1 (Anastrozole 1 mg/capsule, 50 capsules)
Clomo50 (Clomiphene Citrate 50 mg/capsule, 50 capsules)
Tamoxo20 (Tamoxifen Citrate 20 mg/capsule, 50 capsules)
Lab Analysis -
Browse our uploaded images, but take note that we have a seperate, more detailed post for the lab analysis results - Click Here!
Our current batch of Boldeno UD250 contains only 203,19 mg/ml of boldenone undecylenate. This is an oversight and a mistype during our calculations of this batch of the product and will be fixed are re-tested on our next batch. This batch is currently discounted on our online store.
Payment options -
1. Currently we only accept cryptocurrency at our shop's secure checkout (USDT, Ethereum and Bitcoin)
2. You can also pay securely with your bank card by utilizing a crypro on-ramp service (we have a detailed guide on our website).
Shipping options -
We are located in the EU but can ship worldwide.
Shipping costs are region dependant with conditional free shipping.
In case of a lost shipment, we will re-send the package or provide store credit of the order's value.
Security -
1. After an order is completed, we will delete it from our e-commerce system.
2. For registered users, after ordering you can either change your actual contact information and address details or delete your acount.
3. The monetary transaction itself is completely private, since it uses cryptocurrency as a payment method (it is also private if you pay by card using a crypto on-ramp).
Visit our website
Contact us
Email -
Telegram -
@BlackbirdPharma
We strive to produce our products of the highest quality and safety in mind of the end user. Our recipes are tailored to every compond to use the least amount of solvents possible, while keeping the solution stable in cool environments. We do not use inflammatory carrier oils and solvents and we are transparent of the ingredients used in our every product.
Our work ethics:
1. Every work surface and tool is wiped clean using isopropyl alcohol.
2. We wear nitrile gloves and respirator masks. We wipe our gloves with isopropyl alcohol before and during production to ensure the sterility of our product.
3. Filtering and bottling steps are conducted inside a laminar flow cabinet equipped with a medical grade H14 HEPA filter.
4. Every container is cleaned using zero additive dish soap, rinsed with 97% ethanol, sterilized in an autoclave and finally dried in a laminar flow cabinet.
5. Our raws and dry ingredients are stored in a dry, moisture controlled environment. All of the ingredients and finished product is stored in a controlled room temperature and protected from UV light.
Our production:
We source our raws only from the most reputable source. Well known and highly regarded in this community.
Injectable steroids -
1. Our chosen carrier oils and solvents are non-inflamatory and do not cause excessive pip (from personal experience, 3ml glute shots are pip free).
We dose benzyl alcohol at quantities used by phamaceutical companies, and benzyl benzoate only just enough to hold the active ingredient at 4°C.
We use MCT carrier oil for our short acting ester injectable steroids, avocado carrier oil for our medium acting esters and castor carrier oil for our long acting esters.
2. We sterilize our containers and tools (made of heat-resistant and non-reactive materials). In the mean time we calculate and weigh out the ingredients for the batch.
3. We heat up and mix the solution on a magnetic stir hotplate until everything is dissolved. We monitor the temperature of the solution with a thermometer. We heat the mixture up only to the melting point of the active ingredient, afterwards we quickly cool it to room temperature.
4. Then we sterilize the vacuum filtration aparatus and the 0.22 µm filter membrane, and proceed to vacuum filter the solution insde of the laminar flow cabinet.
5. The glass vials and butyl rubber stoppers are sterilized in a 97% ethanol bath and dried in the laminar flow cabinet.
6. The filtered solution is bottled inside of the laminar flow cabinet, with each bottle filled to containin 10.5 ml of the final product, and then capped.
7. Then we label the bottles, apply the security code sticker and box them.
Oral steroids and PCT -
1. We grind the active ingredient in to a fine powder and measure the necessary weight of the pharmaceutical grade microcrystalline cellulose filler at a pre-calculated weight ratio.
2. The active ingredient is then poured in a non-reactive container along with the microcrystalline cellulose filler at a 1:1 ratio. Mixed together by shaking and swirling the container. Then the steps of 1:1 dilution and mixing are repeated until the calculated ratio of active ingredient and filler are reached, ensuring the calculated dose is reached and the mixture is homogeneous. Silica gel pouches are placed in the container for moisture control.
3. Then we fill gelatin capsules with the prepared mixture using a manual capsule filling machine. The powder is tapped to ensure each capsule is filled properly.
4. We label the mylar foil pouches and apply the security code stickers.
5. The prepared capsules are filled in the pouches (100 caps for oral steroids, 50 caps for PCT). The pouches are then heat-sealed.
Our current product lineup:
Injectable Steroids -
Boldeno UD250 (Boldenone Undecylenate 250 mg/ml, 10 ml vial)
Mastero P100 (Drostanolone Propionate 100 mg/ml, 10 ml vial)
Nandro D250 (Nandrolone Decanoate 250 mg/ml, 10 ml vial)
Nandro PP100 (Nandrolone Phenylpropionate 100 mg/ml, 10 ml vial)
Primo E100 (Metenolone Enanthate 100 mg/ml, 10 ml vial)
Testo C200 (Testosterone Cypionate 200 mg/ml, 10 ml vial)
Testo E300 (Testosterone Enanthate 300 mg/ml, 10 ml vial)
Testo P100 (Testosterone Propionate 100 mg/ml, 10 ml vial)
Testo UD200 (Testosterone Undecanoate 200 mg/ml, 10 ml vial)
Trenbo A100 (Trenbolone Acetate 100 mg/ml, 10 ml vial)
Trenbo E200 (Trenbolone Enanthate 200 mg/ml, 10 ml vial)
Oral Steroids -
Anadro10 (Oxymetholone 10 mg/capsule, 100 capsules)
Anavaro10 (Oxandrolone 10 mg/capsule, 100 capsules)
Dianabo10 (Methandienone 10 mg/capsule, 100 capsules)
Turinabo10 (Chlorodehydromethyltestosterone 10 mg/capsule, 100 capsules)
Winstro10 (Stanozolol 10 mg/capsule, 100 capsules)
PCT & Anti Estrogen -
Anastro1 (Anastrozole 1 mg/capsule, 50 capsules)
Clomo50 (Clomiphene Citrate 50 mg/capsule, 50 capsules)
Tamoxo20 (Tamoxifen Citrate 20 mg/capsule, 50 capsules)
Lab Analysis -
Browse our uploaded images, but take note that we have a seperate, more detailed post for the lab analysis results - Click Here!
Our current batch of Boldeno UD250 contains only 203,19 mg/ml of boldenone undecylenate. This is an oversight and a mistype during our calculations of this batch of the product and will be fixed are re-tested on our next batch. This batch is currently discounted on our online store.
Payment options -
1. Currently we only accept cryptocurrency at our shop's secure checkout (USDT, Ethereum and Bitcoin)
2. You can also pay securely with your bank card by utilizing a crypro on-ramp service (we have a detailed guide on our website).
Shipping options -
We are located in the EU but can ship worldwide.
Shipping costs are region dependant with conditional free shipping.
In case of a lost shipment, we will re-send the package or provide store credit of the order's value.
Security -
1. After an order is completed, we will delete it from our e-commerce system.
2. For registered users, after ordering you can either change your actual contact information and address details or delete your acount.
3. The monetary transaction itself is completely private, since it uses cryptocurrency as a payment method (it is also private if you pay by card using a crypto on-ramp).
Visit our website
https://blackbirdpharma.com/Contact us
Email -
info@blackbirdpharma.comblackbirdpharma@proton.meTelegram -
@BlackbirdPharma
Attachments
-
Analiza_H627RDJ7-1.webp -
Analiza_H726EHK2-1.webp -
Analiza_K276R5GW-1.webp -
Analiza_M726DT27-1.webp -
Analiza_S72NKDD6-1.webp -
Analiza_S82NDE39-1.webp -
Analiza_T62MEK87-1.webp -
Analiza_T268E9LK-1.webp -
Analiza_Y62MKE76-1.webp -
Analiza_4N287DH2-1.webp -
Analiza_3NUE76F2-1.webp -
Analiza_6N2KF76E-1.webp -
Analiza_B72KD66F-1.webp -
Analiza_E72NLD87-1.webp -
Analiza_F53M8T24-1.webp -
Analiza_F72MNDJ4-1.webp -
Analiza_F92MKD65-1.webp -
Analiza_G71ME662-1.webp -
Analiza_H27D83HF-1.webp
Last edited:
