BrewPorn

[Samael]

anyone got experience with something like this for sterilizing labware, vials?
http://www.ebay.co.uk/itm/Sterilizer-Dry-Heat-Durable-Service-Magnifier-Ultraviolet-Radiation-NV-208C-/172692306554?hash=item2835437a7a:g-4AAOSw9OFZJTTH

or, this kinda of little bakery, it can do max.482F,

and i've heard that 500F for an hour is required, would this be enough?
thx

 

[XmadXscientist]

Just some fun stuff.

 

[Samael]

View attachment 75777

Just some fun stuff.

nice, did you made those cool lookin labels through some label maker?
Let me know, thx;-)

 

[Leancuisine]

I made a batch of TNE using 50/50 EO/Mig. 75mg/ml. That was about a week ago. Still holds.

 

[Leancuisine]

View attachment 75777

Just some fun stuff.

With these you used mig as the main carrier? I've been doing 50/50 EO/Mig. I love mig.
I tried a DHT/var blend of 50/30. Getting cloudy. If panda would hurry the hell up and get me my guac, I could definitely get that to hold.

Also have TNE @ 100mg/ml with the 50/50 EO/mig blend. 5/40 BA/BB. It's been a few hours and it's holding. We will check on Wednesday. Leaving town tomorrow for surgery on Tuesday.

 

[XmadXscientist]

nice, did you made those cool lookin labels through some label maker?
Let me know, thx;-)

https://www.amazon.com/gp/aw/d/B00OCEKCB2/ref=mp_s_a_1_1?ie=UTF8&qid=1505102955&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=brother+600&dpPl=1&dpID=51uOHAFgCQL&ref=plSrch (Amazon.com : Brother P-touch PTD600 PC Connectible Label Maker with Color Display : Office Products)

Then any of the one inch tapes. I hook it up to my computer now because it's easier to customize.

 

[XmadXscientist]

With these you used mig as the main carrier? I've been doing 50/50 EO/Mig. I love mig.
I tried a DHT/var blend of 50/30. Getting cloudy. If panda would hurry the hell up and get me my guac, I could definitely get that to hold.

Also have TNE @ 100mg/ml with the 50/50 EO/mig blend. 5/40 BA/BB. It's been a few hours and it's holding. We will check on Wednesday. Leaving town tomorrow for surgery on Tuesday.

I tried it with mig as the carrier because a member here said they used my dbol recipe and it was butter. I pinned 1ml with 2ml POG primo and it's pretty smooth.

I've decided to use 1%BA and 2-5% guaiacol for hard to hold stuff as this seems to be the most optimal combo pip reduction. 3%BA starts a little noticeable pip for me and 5% was less enjoyable.

Good luck with your surgery.

 

[Leancuisine]

I have TNE sitting at 100mg/ml at 5/40 BA/BB and 50/50 EO/miglyol.

It's been about 5 days now. Still holding. I bought a mortar and pestle and tried to crush the powder down as much as I could, then measured out 2 grams out that and made 20ml of it. Still holding. Figured I could use the same recipe for 50 DHT, 30 Var, but that crashed. I'll keep trying with that last one.

I have a TrNE/DHT/Sdrol blend at 25/25/15, and that stuff seems to work! Wanting to try 1ml of this with 200mg if TNE.

Also going to be trying to beef up my label making game today.

 

[LordSamuilo]

I have a TrNE/DHT/Sdrol blend at 25/25/15, and that stuff seems to work!

That's a dope ass blend !! Did you use the same recipe as your tne100 ?

Edit: you might need guai to get that var blend to hold , its not quite as bad as Winny but its right in the same ballpark as far as melting point and solubility.. And , the Winny i made was a nightmare getting it to hold until I finally got down to 40mg per ml and 15% guai , but really isn't to bad as far as pip is concerned...

 

[Leancuisine]

That's a dope ass blend !! Did you use the same recipe as your tne100 ?

Edit: you might need guai to get that var blend to hold , its not quite as bad as Winny but its right in the same ballpark as far as melting point and solubility.. And , the Winny i made was a nightmare getting it to hold until I finally got down to 40mg per ml and 15% guai , but really isn't to bad as far as pip is concerned...

I got the blend idea from @XmadXscientist
For the TrNE blend I just used EO. I will be trying to up the doses a bit with miglyol in it.

In still waiting for my guac to show up.

 

[XmadXscientist]

you might need guai to get that var blend to hold ,

I've gotten it to hold at 20mg/ml no guaiacol

 

[LordSamuilo]

I've gotten it to hold at 20mg/ml no guaiacol

I've seen Winny recipes as well that had no guaiacol , but they were the same way like 20-25ml and alot of bb ... That's kinda why I opt for the guaiacol because It seems like you gotta go a lot of bb and end up shotting a lot of ml's or use the harsher solvent . it kinda makes me curious though how high you could get it without the guai , did it go into solution pretty easy at 20mg ?

 

[XmadXscientist]

did it go into solution pretty easy at 20mg ?

Not too bad, had to use a lot of gear. I made it in a blend with 30test,30tren/20var. Now I do 50test/50tren/20var with 5% guaiacol and it actually has a little less pip.

 

[Lukesky152]

Tren ace 100mg 2%20% CSO....test E 250mg 1.5%7.8%CSO ..

 

[BuryMeBig]

TNE 100mg/mL @100mL

Oil:Mig-39.76mL

Powder:10grams

BA: 1.5%-1.5mL

BB: 16%-16mL

EO: 30%-22mL

Guaiacol: 16%- 11.7mL

Recipe will hold and is absolutely PIP free, flows through insulin needles like butter.

*Powder must be finely micronized by either mortar and pestle, or what works most efficiently, a coffee grinder. I would turn the powder finer than baby powder doing this.

Add the solvents to powder starting alphabetically backwards, so Guaiacol, EO, BB, BA

Heat and keep on magnetic stirrer for 30min. and heat the mig. to the same temp, and add to the dissolved mixture. Keep on magnetic stirrer with heat for another 30min to allow the hormone to become stable. Filter while still hot.

 

[BuryMeBig]

Tren ace 100mg 2%20% CSO....test E 250mg 1.5%7.8%CSO ..

Tren Ace @100mg only needs 1.5% BA, 12% BB with CSO.

 

[BuryMeBig]

Here's a few more for now if anyone's interested

Test Cyp/Test Enan. 200mL @250mg/mL

Oil:102.04mL

Powder: 50grams

BA: 1.5%- 3mL

BB: 12%- 24mL

EO:20%- 25.51mL

Test Prop 200mL @200mg/mL (Painless)

Oil: 86.18mL

Powder:40grams

BA:1.5%- 3mL

BB:16%- 32mL

EO:30%- 38.6mL

Guaiacol:3%- 3.85mL


Masteron Prop. 100mL @100mg/mL (Also for Test P,Test Ace,Test PP,Tren Ace,NPP)

Oil: 61.72mL

Powder:10grams

BA:1.5%- 1.5mL

BB:12%- 12mL

EO:20%- 15.4mL

*I dose all my brews 10% over, if you'd like to, add 10% more raws, and obviously brew it the same, dont adjust anything besides the amount of powder.

*Again, Micronize your raws. (Mortar and pestle, or coffee grinder)

*I'll post more another time if people are interested. Feel free to ask if you'd like.. These have all been brewed, tested and true more times than I can count.

*My carrier oils I use are either Mig, Mig with EO, MCT, MCT with EO, MCT mixed with standard carrier oils: Safflower, Cotton seed, Sesame. (Actually my favorite out of all is Mixing MCT, with safflower and cotton seed, along with small percentage of EO. (10-15%).

Cheers!

 

[LordSamuilo]

Heres a small batch i whipped up the other day of tren a , mast p , testp , npp , winstrol suspension , and test cypionate ... nothing has more than one % ba snd 12%bb ... winstrol recipe , ehhm thats an ancient chinese secret ...

Edit: carrier is 100% mig in everything but winny (obviously )....

 

[Lukesky152]

Just ordered some mct and eo , now I'm waiting for China to get off holidays.I'm anticipating in using the new recipe , what I use works great , just wanna use something that is better , but thank u for ur post and interest in helping out

 

[Lukesky152]

Here's a few more for now if anyone's interested

Test Cyp/Test Enan. 200mL @250mg/mL

Oil:102.04mL

Powder: 50grams

BA: 1.5%- 3mL

BB: 12%- 24mL

EO:20%- 25.51mL

Test Prop 200mL @200mg/mL (Painless)

Oil: 86.18mL

Powder:40grams

BA:1.5%- 3mL

BB:16%- 32mL

EO:30%- 38.6mL

Guaiacol:3%- 3.85mL


Masteron Prop. 100mL @100mg/mL (Also for Test P,Test Ace,Test PP,Tren Ace,NPP)

Oil: 61.72mL

Powder:10grams

BA:1.5%- 1.5mL

BB:12%- 12mL

EO:20%- 15.4mL

*I dose all my brews 10% over, if you'd like to, add 10% more raws, and obviously brew it the same, dont adjust anything besides the amount of powder.

*Again, Micronize your raws. (Mortar and pestle, or coffee grinder)

*I'll post more another time if people are interested. Feel free to ask if you'd like.. These have all been brewed, tested and true more times than I can count.

*My carrier oils I use are either Mig, Mig with EO, MCT, MCT with EO, MCT mixed with standard carrier oils: Safflower, Cotton seed, Sesame. (Actually my favorite out of all is Mixing MCT, with safflower and cotton seed, along with small percentage of EO. (10-15%).

Cheers!

Was wondering , I don't heat up my tren ace, do I do the same with Mast and test prop, and npp, I usually let my solvents do the dissolving and just warm up the oil ,I'm assuming u do with test prop , these are some of the compounds I haven't yet to try will very soon , I always cap my oral compound s , maybe in the Future I wanna try some injectables like turinabol acetate and ANAVAR