Giant Labs *US Domestic Introduction*

[Giant labs]

*UPDATE

I have received a new shipment of raws in hand and need to add to the list of raws and orals.


Liquid orals

Cialis 25mg/ml $35
Viagra 25mg/ml $30

Raws
Cialis 2$/g
Viagra 2.5$/g
Tren Hex 4$/g

 

[MisterSuperGod]

*UPDATE

I have received a new shipment of raws in hand and need to add to the list of raws and orals.


Liquid orals

Cialis 25mg/ml $35
Viagra 25mg/ml $30

Raws
Cialis 2$/g
Viagra 2.5$/g
Tren Hex 4$/g

Woohoo. 2nd hand, stepped on raws from a lying scumbag.
If only you accepted CIM as payment, i would be all over that.

Please do explain why you won't post stock pics. Keep the bullshit to a minimum in your reply and skip the "i'm too old school" lie, because you posted pics of raws, which is just as incriminating as posting pics of vials without viewable labels.

 

[Freakmidd]

Next to nothing? I have provided proof of close to 5-8 KILOS of raw powder. Yes, I understand you would like pictures of next to everything, but I am not going to do that. I have shown proof of raw stock, reached out to purchase an autoclave, pulled ALL caps until the M&P come in, adjusted dose on sdrol, and answered every single question. Thank you for continuing to vet my intro as everyone’s input only makes me more knowledgeable to be able to provide the best quality gear in the safest fashion. Hope everyone is having a blessed day!

News flash.. all you've posted are bags of some unknown powders that were labeled by hand with a marker, that for all we know could have been purchased at the bulk barn.

 

[Giant labs]

News flash.. all you've posted are bags of some unknown powders that were labeled by hand with a marker, that for all we know could have been purchased at the bulk barn.

The “bulk barn” I’m sure does not come through customs or have anything that compares to the texture of say test e, or deca which both melt at a higher temperature which have to be stored in a cool place. Thanks for your input!

 

[Freakmidd]

The “bulk barn” I’m sure does not come through customs or have anything that compares to the texture of say test e, or deca which both melt at a higher temperature which have to be stored in a cool place. Thanks for your input!

All of which can be seen.. through the plastic bags that you took pictures of.

 

[BigBaldBeardGuy]

*UPDATE

I have received a new shipment of raws in hand and need to add to the list of raws and orals.


Liquid orals

Cialis 25mg/ml $35
Viagra 25mg/ml $30

Raws
Cialis 2$/g
Viagra 2.5$/g
Tren Hex 4$/g

This is AWESOME! So now you can post the HPLC reports for those raws that JUST came.

 

[Giant labs]

This is AWESOME! So now you can post the HPLC reports for those raws that JUST came.

You are right! I have emailed the raw source and should have them shortly. With the time difference it will be a couple hours if I am not mistaken, but I will absolutely provide you them.

 

[BigBaldBeardGuy]

You are right! I have emailed the raw source and should have them shortly. With the time difference it will be a couple hours if I am not mistaken, but I will absolutely provide you them.

Great, I’ll be reminding you. I know I’ll have to because you still haven’t provided the make and model of your “Pharmaceutical Mixing Machine 5000”. And you also ignored my question about which scale you use to measure all this shit with. You’re a cagey little fucker aren’t you!?

 

[Iron Vett]

I’ve read through this entire trash heap of a source intro post purely for the entertainment that I was certain would ensue. This guy lost me on page two with the words “corn starch”. It would take a real dumb ass to consider using this as a filler after only attempting to mix the first batch of caps. I know. I tried it when I first started. It’s horrible. It’s sticks to everything. Clumps up just as you would expect a thickening agent would do. I could not see corn starch being able to adequately suspend the compounds evenly throughout the mixture much less be able to get that powdery crap packed into the capsules properly. I threw the crap away and moved on to my next choice of filler and have been using that filler ever since. There had actually been some discussion in the TGI thread about corn starch as a filler. And also, how do you come up with the pricing for this last batch of raw powders? Viagra and Cialis are dirt cheap but I can understand that a decent markup can be demanded for domestically delivered raw powders and approximately $2 a gram is a decent price. It’s that Tren Hex at $4 a gram. Tren Hex is $17-20 a gram when bought through international outlets. There is no way you can justify selling Tren hex at $4 a gram. With issues like this I would hate to see what would come up if someone were to actually begin inject your brew. Dude you scare me.

 

[The ole man]

*UPDATE

ALL capsules have been pulled from inventory. All capsules have been discarded and I will update you once they are all back in stock. The liquid orals are all still available and sdrol caps and liquid will be changed to 20mg.

The fact that you made orals and or so scared they are wrong, that they have all been disposed of, really begs to question, how fucked up are your oils?
I mean bro, your trying to learn to brew, while trying to be a source. Do you even realize how fucked up that is? Would you go to a dentist that was still in his first year of dental school?
Do you not realize that we have several sources here, with 10x the experience you got?
Look I give you props for trying a new business adventure, and even having the balls to have 8 kilos of raws sent thru customs to you, but that’s where it ends.
Just close down shop, hang out in the home brew section and learn what the fuck your doing. Come back in 6 months and try it again.

Hi, friends. Tiny here from Giant Labs.

Are you sick and tired of sources that come to Meso properly, bringing tested raws and finshed products from day one? Or sources that are transparent and comply with the requests of members? i know i am and i know you are too!

i bring you Giant Labs. At Giant Labs, we don't trust the pseudo science that is analytical testing, instead we rely on the tried and true method of blind guessing and overdosing.

Oils? Our oils are the finest grade you'll find. i believe it's GSO, but i just sat down and i'm not getting back up to look in the cupboard. But i'm pretty sure it's GSO or something close to that. i know it has a 3 letter acronym, let's put it that way.

Sterility? Let me google that... Ohhh okay, makes sense. Here at Giant Labs we pride ourselves on sterility. We bake all of our glassware and vials in an electric stove that was purchased from our local Salvation Army. Yes, we're all about giving back to the community. To further ensure sterility, we wipe down most visible surfaces of the oven with a new or slightly used Mr Clean Magic Eraser.

Capping? Oh we do that too. We take the raw materials, toss that in a freezer bag that we purchased from Walmart, 10 for $2, you can't beat that with a stick! Then we get some filler and toss that in the bag too. Then we shake the bag while counting to 10 Mississippi and bingo, bango, boingo, we got perfectly mixed orals. Oh, we also weigh and measure all that stuff too, but the details of how we do that are unimportant.

Pics? Well, here's the thing. We here at Giant Labs are old school. The thought of taking a picture or two and putting it on the internet is just mind blowing to us. i mean that literally! When i think about that, i get all clammy and dizzy and have to sit down. We'd really prefer that you just take our word for it. Why would we lie? That wouldn't fall inline with our old school philosophy.

Filters? We now filter our gear! We use an unknown brand that we purchased in bulk from Alibaba. We can't read Chinese or Japanese or whatever crazy symbol language is on the box, but we heard that .22 micron filters were the best, so i'm assuming that's what we have because Alibaba is best known for it's high quality goods.

Bottom line, Giant Labs is here to serve the Meso community and we're ready to become the leader of the pack amongst US domestic sources.

Give us a try. You can even pay securely and hassle free with Wester Union. Just place an order, we'll give you the receivers information and you can send us your hard earned money with confidence in knowing that a package with most or all of what you ordered will eventually be mailed to you.

Thank you, friends. Have a blessed day and may god, buddha or some other deity watch over you and protect you.

That was epic!

Next to nothing? I have provided proof of close to 5-8 KILOS of raw powder. Yes, I understand you would like pictures of next to everything, but I am not going to do that. I have shown proof of raw stock, reached out to purchase an autoclave, pulled ALL caps until the M&P come in, adjusted dose on sdrol, and answered every single question. Thank you for continuing to vet my intro as everyone’s input only makes me more knowledgeable to be able to provide the best quality gear in the safest fashion. Hope everyone is having a blessed day!

You don’t have no inventory. Your gonna brew the orders as they get made. You may have brewed up a few vials of the more common ones but that’s about it.
Considering you don’t know what the fuck your doing, having to rush to get your order brewed and mailed, is just gonna cause even more problems from trying to hurry. What happens when you confuse test for tren and you send that to an newbie. Or adex for anavar. Someone’s gonna get really fucked up.
The gigs up dude. Go home.

 

[Giant labs]

Great, I’ll be reminding you. I know I’ll have to because you still haven’t provided the make and model of your “Pharmaceutical Mixing Machine 5000”. And you also ignored my question about which scale you use to measure all this shit with. You’re a cagey little fucker aren’t you!?

I use a US Balance 500g x.01 scale from Med supply for weighing everything. My apologies for not replying on that sooner. I am in the middle of transferring the new raws to our storage location. Once I get to where the equipment is I will get that for you immediately.

 

[Giant labs]

I’ve read through this entire trash heap of a source intro post purely for the entertainment that I was certain would ensue. This guy lost me on page two with the words “corn starch”. It would take a real dumb ass to consider using this as a filler after only attempting to mix the first batch of caps. I know. I tried it when I first started. It’s horrible. It’s sticks to everything. Clumps up just as you would expect a thickening agent would do. I could not see corn starch being able to adequately suspend the compounds evenly throughout the mixture much less be able to get that powdery crap packed into the capsules properly. I threw the crap away and moved on to my next choice of filler and have been using that filler ever since. There had actually been some discussion in the TGI thread about corn starch as a filler. And also, how do you come up with the pricing for this last batch of raw powders? Viagra and Cialis are dirt cheap but I can understand that a decent markup can be demanded for domestically delivered raw powders and approximately $2 a gram is a decent price. It’s that Tren Hex at $4 a gram. Tren Hex is $17-20 a gram when bought through international outlets. There is no way you can justify selling Tren hex at $4 a gram. With issues like this I would hate to see what would come up if someone were to actually begin inject your brew. Dude you scare me.

The tren hex price is a typo and is priced at $14/g

 

[Giant labs]

The fact that you made orals and or so scared they are wrong, that they have all been disposed of, really begs to question, how fucked up are your oils?
I mean bro, your trying to learn to brew, while trying to be a source. Do you even realize how fucked up that is? Would you go to a dentist that was still in his first year of dental school?
Do you not realize that we have several sources here, with 10x the experience you got?
Look I give you props for trying a new business adventure, and even having the balls to have 8 kilos of raws sent thru customs to you, but that’s where it ends.
Just close down shop, hang out in the home brew section and learn what the fuck your doing. Come back in 6 months and try it again.


That was epic!

You don’t have no inventory. Your gonna brew the orders as they get made. You may have brewed up a few vials of the more common ones but that’s about it.
Considering you don’t know what the fuck your doing, having to rush to get your order brewed and mailed, is just gonna cause even more problems from trying to hurry. What happens when you confuse test for tren and you send that to an newbie. Or adex for anavar. Someone’s gonna get really fucked up.
The gigs up dude. Go home.

Well seeing and tren and test are two completely different colors, that will never get mistaken. And anyone ordering it should know if they get yellow “test” , that it is absolutely not test. I know how to brew gear and just because I have not posted pictures of my vials, does not mean I have no clue what I am doing. I have sent out multiple orders now and a some for testing as well. Also, I posted close to 8 kilos, but have closer to 18-20 on hand. They did not come overnight and as stated before, I have invested a lot of time and money into this. Thank you for your input!

 

[MisterSuperGod]

You are right! I have emailed the raw source and should have them shortly. With the time difference it will be a couple hours if I am not mistaken, but I will absolutely provide you them.

Still waiting on that bullshit free reply regarding stock pics.

Don't want your wittle wables to be seen? Turn the vials around or better yet, get your fat, lazy, old ass up on a chair and take an overhead shot.

Make sure to zoom out, because with that supposed inventory you have, we should be able to see vial caps for fucking days.

You've run out of excuses and you're running out of time.
We both know that you can easily and safely take a pic just as i suggested. The only logical explanation now is that you lied about having 200-250 vials of each compound, and you know that once we catch you in a lie that this shit show is over.

It's time to put up or shut up, Tiny. No more excuses, no more dodging replies. The gauntlet has been thrown down.

You're either a source or a lying fraud. Your freeloading grace period is over. Time to prove what you really are.

 

[BigBaldBeardGuy]

You're either a source or a lying fraud. Your freeloading grace period is over. Time to prove what you really are.

Oooh oooh. For my answer, imma gonna go with “lying fraud”. I don’t think he has any vials. I don’t think he has any legitimate product at all.

I am impressed with his persistence though considering this thread is just one big turd. I’m guessing he’s waiting for his white knight member to reveal testing results that are spot on and at that time this pointless venture will become his cash cow. I only hope that member has a posting history to substantiate the test results.

 

[Iron Vett]

Oooh oooh. For my answer, imma gonna go with “lying fraud”. I don’t think he has any vials. I don’t think he has any legitimate product at all.

I am impressed with his persistence though considering this thread is just one big turd. I’m guessing he’s waiting for his white knight member to reveal testing results that are spot on and at that time this pointless venture will become his cash cow. I only hope that member has a posting history to substantiate the test results.

I get your sarcasm but this guy’s brew is going to be dosed pretty far over the labeled amounts and I also realize you already know this too. If he doesn’t have his own testing but at least has these testing reports from his raws supplier, then he should be overdosing by the stated percentage of purity on these reports. If he has a decent raw source, these raws should be in the 96-99% pure range. That wouldn’t take anywhere close to a blanket 15% overdose to make label claims. This is brewing 101 stuff.

 

[MisterSuperGod]

I get your sarcasm but this guy’s brew is going to be dosed pretty far over the labeled amounts and I also realize you already know this too. If he doesn’t have his own testing but at least has these testing reports from his raws supplier, then he should be overdosing by the stated percentage of purity on these reports. If he has a decent raw source, these raws should be in the 96-99% pure range. That wouldn’t take anywhere close to a blanket 15% overdose to make label claims. This is brewing 101 stuff.

To be fair, at no point did Tiny actually say he knew what he was doing. Which is surprising, because he's done pretty much nothing but lie through his dentures this entire time.

 

[Giant labs]

I get your sarcasm but this guy’s brew is going to be dosed pretty far over the labeled amounts and I also realize you already know this too. If he doesn’t have his own testing but at least has these testing reports from his raws supplier, then he should be overdosing by the stated percentage of purity on these reports. If he has a decent raw source, these raws should be in the 96-99% pure range. That wouldn’t take anywhere close to a blanket 15% overdose to make label claims. This is brewing 101 stuff.

Test p brewed at 15% over would put it was 115mg vs 100mg if it was 100% pure. Most of our raws have come from sources you all know and more than likely order from. My prices beat theirs as I had the funds to order quite a large amount over the last few months to start this up.

 

[Iron Vett]

Test p brewed at 15% over would put it was 115mg vs 100mg if it was 100% pure. Most of our raws have come from sources you all know and more than likely order from. My prices beat theirs as I had the funds to order quite a large amount over the last few months to start this up.

I’m glad that you revealed the type of filters that you have been using but I still think we should be treated with those pics of the info on that current box of filters. Chinese or not we should be allowed to see this since filtration is the sole process that is making the oils, that you want us injecting into our bodies, sterile.

 

[mp46]

I wonder what he considers "this evening"